S-80914CLMC-G6JT2G belongs to the category of integrated circuits (ICs).
This product is commonly used in electronic devices for voltage detection and reset functions.
The S-80914CLMC-G6JT2G is available in a SOT-23-5 package. It is typically sold in reels containing 3,000 units per reel.
The S-80914CLMC-G6JT2G has a total of five pins arranged as follows:
```
| | --| VDD GND |-- Pin 1: Ground (GND) --| RST OUT |-- Pin 2: Reset Output (OUT) --| VIN |-- Pin 3: Voltage Input (VIN) --| NC |-- Pin 4: No Connection (NC) --| GND VDD |-- Pin 5: Supply Voltage (VDD) |___________| ```
The S-80914CLMC-G6JT2G operates by monitoring the input voltage (VIN) and comparing it to a reference voltage. When the input voltage falls below the detection threshold, the reset output (OUT) is activated, indicating a low voltage condition. This feature is commonly used to trigger system resets or power-down sequences.
The S-80914CLMC-G6JT2G finds application in various electronic devices where voltage detection and reset functions are required. Some potential fields of application include: - Battery-powered devices - Microcontrollers and microprocessors - Industrial automation systems - Consumer electronics - Automotive electronics
For those seeking alternative options, the following models offer similar functionality: - S-80914CNMC-G6JT2G - S-80914CLNB-G6JT2G - S-80914ALMP-G6JT2G
These models can be considered based on specific requirements and availability.
In conclusion, the S-80914CLMC-G6JT2G is an integrated circuit designed for voltage detection and reset functions. It offers accurate detection, low power consumption, and a compact package. While it has limitations in terms of voltage range and output leakage current, it is suitable for various applications in different industries. Alternative models are available to cater to specific needs.
Sure! Here are 10 common questions and answers related to the application of S-80914CLMC-G6JT2G in technical solutions:
Question: What is the S-80914CLMC-G6JT2G?
Answer: The S-80914CLMC-G6JT2G is a voltage detector IC (integrated circuit) manufactured by a specific company.
Question: What is the purpose of the S-80914CLMC-G6JT2G?
Answer: The purpose of this IC is to monitor the voltage level in a circuit and provide an output signal when the voltage crosses a certain threshold.
Question: What is the operating voltage range of the S-80914CLMC-G6JT2G?
Answer: The operating voltage range of this IC is typically between 1.0V and 6.0V.
Question: How does the S-80914CLMC-G6JT2G detect voltage levels?
Answer: This IC uses a built-in voltage reference and comparator to compare the input voltage with a preset threshold.
Question: Can the S-80914CLMC-G6JT2G be used in battery-powered applications?
Answer: Yes, this IC can be used in battery-powered applications as it has a low quiescent current consumption.
Question: What is the output type of the S-80914CLMC-G6JT2G?
Answer: The output of this IC is an open-drain N-channel transistor, which requires an external pull-up resistor.
Question: What is the typical accuracy of the voltage detection in the S-80914CLMC-G6JT2G?
Answer: The typical accuracy of this IC is ±1.0% of the detection voltage.
Question: Can the S-80914CLMC-G6JT2G be used in automotive applications?
Answer: Yes, this IC is suitable for automotive applications as it meets the necessary standards and has a wide operating temperature range.
Question: Does the S-80914CLMC-G6JT2G have any built-in protection features?
Answer: Yes, this IC has built-in overcurrent protection and thermal shutdown features to ensure safe operation.
Question: What package type does the S-80914CLMC-G6JT2G come in?
Answer: The S-80914CLMC-G6JT2G is available in a small surface-mount SOT-23-5 package.
Please note that the answers provided here are general and may vary depending on the specific datasheet and application requirements of the S-80914CLMC-G6JT2G.