S-80932CLMC-G62T2U

Product Overview

Category

S-80932CLMC-G62T2U belongs to the category of integrated circuits (ICs).

Use

This product is commonly used in electronic devices for voltage detection and reset functions.

Characteristics

• Voltage detection range: 1.6V to 6.0V
• Accuracy: ±1.0%
• Low supply current: 1.0μA (typical)
• Reset output type: N-channel open drain
• Operating temperature range: -40°C to +85°C

Package

The S-80932CLMC-G62T2U is available in a small surface-mount package, specifically the SOT-23-5 package.

Essence

The essence of this product lies in its ability to accurately detect voltage levels within a specified range and provide a reset signal when necessary.

Packaging/Quantity

The S-80932CLMC-G62T2U is typically packaged in reels, with 3,000 units per reel.

Specifications

• Supply voltage range: 1.6V to 6.0V
• Quiescent current: 1.0μA (typical), 2.0μA (maximum)
• Output voltage: VOUT = VDET - VRESET
• Output current: 5mA (maximum)
• Power-on reset delay time: 200ms (typical), 400ms (maximum)

Detailed Pin Configuration

The S-80932CLMC-G62T2U has five pins arranged as follows:

```

---

| | --| |-- |____| ```

Pin 1: GND (Ground) Pin 2: VDD (Supply Voltage) Pin 3: MR (Manual Reset) Pin 4: VOUT (Output Voltage) Pin 5: VDET (Voltage Detection)

Functional Features

1. Voltage Detection: The S-80932CLMC-G62T2U can accurately detect voltage levels within the specified range.
2. Reset Function: It provides a reset signal through the open-drain output when the detected voltage falls below the threshold.
3. Low Power Consumption: With a quiescent current of only 1.0μA, this IC minimizes power consumption in electronic devices.

Advantages and Disadvantages

Advantages

• Wide voltage detection range
• Accurate voltage detection with low tolerance
• Low power consumption
• Small package size for space-constrained applications

Disadvantages

• Limited output current capability (5mA maximum)
• Manual reset functionality may not be suitable for all applications

Working Principles

The S-80932CLMC-G62T2U operates by continuously monitoring the voltage level at the VDET pin. When the voltage falls below the specified threshold, the IC triggers a reset signal through the open-drain output pin (VOUT). This reset signal can be used to initiate system resets or perform other necessary actions.

Detailed Application Field Plans

The S-80932CLMC-G62T2U finds applications in various electronic devices where voltage monitoring and reset functions are required. Some potential application fields include:

1. Microcontrollers: Ensuring proper operation by monitoring supply voltage and initiating resets if necessary.
2. Battery-Powered Devices: Preventing damage to sensitive components by detecting low battery voltage and triggering appropriate actions.
3. Industrial Control Systems: Monitoring power supply integrity and initiating system resets in case of voltage fluctuations or failures.
4. Automotive Electronics: Protecting critical systems by detecting abnormal voltage conditions and taking corrective measures.

Detailed and Complete Alternative Models

1. S-80930CLMC-G6XT2U: Similar to S-80932CLMC-G62T2U but with a different voltage detection range (1.3V to 6.0V).
2. S-80933CLMC-G62T2U: Similar to S-80932CLMC-G62T2U but with a different package (SOT-89-5).

These alternative models offer similar functionality and characteristics, providing flexibility for different application requirements.

Word count: 511 words