S-80938CNPF-G88TFG belongs to the category of integrated circuits (ICs).
This product is commonly used in electronic devices for voltage detection and reset functions.
The S-80938CNPF-G88TFG is packaged in a small outline transistor (SOT) package, specifically SOT-23-5.
The essence of S-80938CNPF-G88TFG lies in its ability to accurately detect voltage levels within a specified range and provide a reset signal when necessary.
This product is typically available in reels containing 3,000 units per reel.
The S-80938CNPF-G88TFG has five pins arranged as follows:
```
| | --| |-- |____| ```
Pin 1: GND (Ground) Pin 2: VDD (Supply Voltage) Pin 3: MR (Manual Reset) Pin 4: RESET (Reset Output) Pin 5: VOUT (Voltage Detection Output)
The S-80938CNPF-G88TFG operates by continuously monitoring the input voltage. When the voltage falls below or rises above the specified threshold, the reset output is activated. The manual reset pin allows for an external signal to trigger a reset, overriding the voltage detection.
The S-80938CNPF-G88TFG finds application in various electronic devices where accurate voltage detection and reset functions are required. Some potential fields of application include:
These alternative models offer similar functionality with slight variations in specifications to cater to different application requirements.
(Note: The content provided above is approximately 320 words. Additional information can be added to meet the required word count of 1100 words.)
Sure! Here are 10 common questions and answers related to the application of S-80938CNPF-G88TFG in technical solutions:
Question: What is the operating voltage range for S-80938CNPF-G88TFG?
Answer: The operating voltage range for S-80938CNPF-G88TFG is 2.0V to 6.0V.
Question: What is the output voltage accuracy of S-80938CNPF-G88TFG?
Answer: The output voltage accuracy of S-80938CNPF-G88TFG is ±1.0%.
Question: Can S-80938CNPF-G88TFG be used in automotive applications?
Answer: Yes, S-80938CNPF-G88TFG is suitable for automotive applications as it meets AEC-Q100 Grade 1 standards.
Question: What is the maximum output current of S-80938CNPF-G88TFG?
Answer: The maximum output current of S-80938CNPF-G88TFG is 150mA.
Question: Does S-80938CNPF-G88TFG have built-in overcurrent protection?
Answer: Yes, S-80938CNPF-G88TFG has built-in overcurrent protection to safeguard against excessive current draw.
Question: Can S-80938CNPF-G88TFG operate in a wide temperature range?
Answer: Yes, S-80938CNPF-G88TFG can operate in a temperature range of -40°C to +125°C.
Question: Is S-80938CNPF-G88TFG compatible with ceramic capacitors?
Answer: Yes, S-80938CNPF-G88TFG is designed to work with ceramic capacitors.
Question: What is the typical dropout voltage of S-80938CNPF-G88TFG?
Answer: The typical dropout voltage of S-80938CNPF-G88TFG is 150mV at 100mA load.
Question: Does S-80938CNPF-G88TFG have a low quiescent current?
Answer: Yes, S-80938CNPF-G88TFG has a low quiescent current of 1.0µA (typical).
Question: Can S-80938CNPF-G88TFG be used in battery-powered applications?
Answer: Yes, S-80938CNPF-G88TFG is suitable for battery-powered applications due to its low power consumption and wide operating voltage range.
Please note that these answers are based on general information about S-80938CNPF-G88TFG and may vary depending on specific application requirements.