Consulte las especificaciones para obtener detalles del producto.
ACS725LLCTR-20AB-T
Product Overview
The ACS725LLCTR-20AB-T belongs to the category of current sensors and is designed for use in various electronic applications. This sensor possesses unique characteristics, comes in a specific package, and offers essential features that make it suitable for a wide range of applications.
Basic Information
- Category: Current Sensor
- Use: Measuring current in electronic circuits
- Characteristics: High accuracy, low noise, compact size
- Package: Surface mount
- Essence: Accurate current measurement in a compact form factor
- Packaging/Quantity: Available in reels with a specific quantity per reel
Specifications
The ACS725LLCTR-20AB-T sensor has the following specifications: - Measurement Range: ±20A - Sensitivity: 100mV/A - Output Type: Analog voltage - Operating Temperature Range: -40°C to 125°C - Supply Voltage: 3V to 5.5V - Package Type: SOIC-16
Detailed Pin Configuration
The sensor has a detailed pin configuration as follows: 1. VCC 2. GND 3. VIOUT 4. NC 5. NC 6. NC 7. NC 8. NC 9. NC 10. NC 11. NC 12. NC 13. NC 14. NC 15. NC 16. NC
Functional Features
- High accuracy current sensing
- Low noise output
- Small form factor
- Wide operating temperature range
Advantages and Disadvantages
Advantages
- High accuracy
- Low noise
- Compact size
- Wide operating temperature range
Disadvantages
- Limited measurement range compared to some other models
- Requires external calibration for precise measurements
Working Principles
The ACS725LLCTR-20AB-T operates based on the principle of Hall effect, where the magnetic field generated by the current passing through the conductor is sensed and converted into an analog voltage output proportional to the current.
Detailed Application Field Plans
The ACS725LLCTR-20AB-T sensor finds applications in various fields, including: - Power supplies - Motor control - Battery management systems - Industrial automation - Consumer electronics
Detailed and Complete Alternative Models
Some alternative models to the ACS725LLCTR-20AB-T sensor include: - ACS712ELCTR-20A-T - ACS770LCB-100B-PFF-T
In conclusion, the ACS725LLCTR-20AB-T current sensor offers high accuracy and low noise in a compact package, making it suitable for diverse electronic applications.
[Word Count: 366]
Enumere 10 preguntas y respuestas comunes relacionadas con la aplicación de ACS725LLCTR-20AB-T en soluciones técnicas
What is the operating voltage range of ACS725LLCTR-20AB-T?
- The operating voltage range of ACS725LLCTR-20AB-T is 3.0V to 5.5V.
What is the typical output sensitivity of ACS725LLCTR-20AB-T?
- The typical output sensitivity of ACS725LLCTR-20AB-T is 40mV/A.
What is the maximum continuous current that ACS725LLCTR-20AB-T can measure?
- ACS725LLCTR-20AB-T can measure a maximum continuous current of ±20A.
What is the output voltage range of ACS725LLCTR-20AB-T?
- The output voltage range of ACS725LLCTR-20AB-T is typically ±2V when operating at the recommended voltage.
Does ACS725LLCTR-20AB-T require an external power supply?
- Yes, ACS725LLCTR-20AB-T requires an external power supply within the specified operating voltage range.
What is the temperature range for proper operation of ACS725LLCTR-20AB-T?
- ACS725LLCTR-20AB-T is designed to operate within a temperature range of -40°C to 125°C.
Is ACS725LLCTR-20AB-T suitable for automotive applications?
- Yes, ACS725LLCTR-20AB-T is AEC-Q100 qualified and suitable for automotive applications.
What is the output noise level of ACS725LLCTR-20AB-T?
- The output noise level of ACS725LLCTR-20AB-T is typically 10mA RMS.
Can ACS725LLCTR-20AB-T be used for battery management systems?
- Yes, ACS725LLCTR-20AB-T is commonly used in battery management systems for current sensing.
What are the typical applications of ACS725LLCTR-20AB-T?
- Typical applications of ACS725LLCTR-20AB-T include motor control, power management, and overcurrent protection in various technical solutions.