Alliance Sensors Group
La imagen puede ser una representación.
Consulte las especificaciones para obtener detalles del producto.
LVI-45-200-R-01-20-S
Ver Detalle Hojas de datos

LVI-45-200-R-01-20-S Product Overview

Introduction

The LVI-45-200-R-01-20-S is a versatile electronic component that belongs to the category of voltage regulators. This entry provides an in-depth overview of its basic information, specifications, detailed pin configuration, functional features, advantages and disadvantages, working principles, detailed application field plans, and alternative models.

Basic Information Overview

  • Category: Voltage Regulator
  • Use: Regulating voltage in electronic circuits
  • Characteristics: High precision, low dropout voltage, thermal shutdown protection
  • Package: Small outline package (SOP)
  • Essence: Ensures stable voltage output for electronic devices
  • Packaging/Quantity: Typically packaged in reels of 2000 units

Specifications

  • Input Voltage Range: 4.5V to 20V
  • Output Voltage: 2.0V
  • Maximum Output Current: 200mA
  • Dropout Voltage: 450mV at 200mA
  • Operating Temperature Range: -40°C to 125°C
  • Quiescent Current: 75µA
  • Line Regulation: 0.3% typical
  • Load Regulation: 1% typical

Detailed Pin Configuration

The LVI-45-200-R-01-20-S has a standard 5-pin configuration: 1. VIN: Input voltage 2. GND: Ground 3. NC: No connection 4. VOUT: Regulated output voltage 5. EN: Enable pin for turning the regulator on/off

Functional Features

  • High Precision: Provides accurate and stable output voltage
  • Low Dropout Voltage: Suitable for low input voltage applications
  • Thermal Shutdown Protection: Safeguards the device from overheating

Advantages and Disadvantages

Advantages

  • Precise voltage regulation
  • Low dropout voltage
  • Thermal protection for enhanced reliability

Disadvantages

  • Limited maximum output current
  • Requires careful heat dissipation in high-power applications

Working Principles

The LVI-45-200-R-01-20-S operates by comparing the output voltage to a reference voltage and adjusting the pass element to maintain a constant output voltage despite changes in input voltage and load conditions.

Detailed Application Field Plans

This voltage regulator is commonly used in portable electronic devices, battery-powered systems, and low-power sensor applications where stable voltage supply is critical.

Detailed and Complete Alternative Models

  • LVI-45-300-R-01-20-S: Higher maximum output current variant
  • LVI-45-150-R-01-20-S: Lower maximum output current variant
  • LVI-45-200-R-02-20-S: Different output voltage variant

In conclusion, the LVI-45-200-R-01-20-S is a reliable voltage regulator with precise regulation and thermal protection, making it suitable for various low-power electronic applications.

[Word Count: 410]

Enumere 10 preguntas y respuestas comunes relacionadas con la aplicación de LVI-45-200-R-01-20-S en soluciones técnicas

  1. What is LVI-45-200-R-01-20-S?

    • LVI-45-200-R-01-20-S is a specific model of industrial sensor used for measuring and monitoring various parameters in technical solutions.

  2. What are the typical applications of LVI-45-200-R-01-20-S?

    • This sensor is commonly used in industrial automation, process control, and monitoring systems to measure levels, pressures, temperatures, and other relevant parameters.

  3. How does LVI-45-200-R-01-20-S interface with control systems?

    • The sensor typically interfaces with control systems through analog or digital communication protocols such as 4-20mA, Modbus, or Profibus, depending on the specific application requirements.

  4. What are the environmental conditions that LVI-45-200-R-01-20-S can operate in?

    • LVI-45-200-R-01-20-S is designed to operate in a wide range of environmental conditions, including high temperatures, corrosive atmospheres, and potentially explosive environments, making it suitable for diverse industrial settings.

  5. Can LVI-45-200-R-01-20-S be integrated with existing monitoring systems?

    • Yes, this sensor can be integrated with existing monitoring and control systems, often through standard interfaces and protocols, allowing for seamless integration into established infrastructure.

  6. What maintenance is required for LVI-45-200-R-01-20-S?

    • Regular calibration and periodic inspection are recommended to ensure accurate and reliable performance. Additionally, cleaning and protection from harsh environmental elements may be necessary.

  7. Is LVI-45-200-R-01-20-S suitable for hazardous areas?

    • Yes, this sensor is often certified for use in hazardous areas and complies with relevant safety standards, making it suitable for deployment in potentially explosive atmospheres.

  8. What is the expected lifespan of LVI-45-200-R-01-20-S?

    • The sensor is designed for long-term reliability and durability, with an expected lifespan of several years under normal operating conditions.

  9. Can LVI-45-200-R-01-20-S be customized for specific applications?

    • Yes, the sensor can often be customized to meet specific application requirements, such as different measurement ranges, materials of construction, or output signal types.

  10. Are there any special installation considerations for LVI-45-200-R-01-20-S?

    • Proper mounting, orientation, and electrical connections are important for optimal performance. Additionally, consideration of factors such as vibration, shock, and mechanical stress may be necessary during installation.