QD Devices Inc.
La imagen puede ser una representación.
Consulte las especificaciones para obtener detalles del producto.
ADM1232ARNZ
Ver Detalle Hojas de datos

ADM1232ARNZ

Product Overview

  • Category: Integrated Circuit (IC)
  • Use: Voltage Monitor and Reset Generator
  • Characteristics: Low-power, precision voltage monitoring, reset generation
  • Package: 8-pin SOIC (Small Outline Integrated Circuit)
  • Essence: Provides accurate monitoring of system voltages and generates a reset signal when the voltage falls below a specified threshold.
  • Packaging/Quantity: Available in reels of 2500 units

Specifications

  • Supply Voltage Range: 1.2V to 5.5V
  • Threshold Voltage Options: 2.93V, 3.08V, 4.38V, 4.63V
  • Operating Temperature Range: -40°C to +85°C
  • Quiescent Current: 7µA (typical)

Detailed Pin Configuration

The ADM1232ARNZ has the following pin configuration:

  1. VCC: Supply Voltage Input
  2. GND: Ground
  3. MR: Manual Reset Input
  4. RESET: Reset Output
  5. VTH: Voltage Threshold Input
  6. GND: Ground
  7. GND: Ground
  8. VCC: Supply Voltage Input

Functional Features

  • Accurate voltage monitoring: The ADM1232ARNZ monitors the system voltage with high precision, ensuring reliable operation.
  • Reset generation: When the monitored voltage falls below the specified threshold, the ADM1232ARNZ generates a reset signal to initiate system recovery.
  • Manual reset input: The MR pin allows for manual resetting of the system, overriding the automatic reset generation.
  • Wide supply voltage range: The IC can operate within a wide range of supply voltages, making it suitable for various applications.

Advantages and Disadvantages

Advantages

  • Low-power consumption: The ADM1232ARNZ operates with a low quiescent current, minimizing power consumption.
  • Precision voltage monitoring: The IC provides accurate voltage monitoring, ensuring system stability.
  • Small form factor: The 8-pin SOIC package allows for compact integration into electronic systems.

Disadvantages

  • Limited threshold voltage options: The ADM1232ARNZ offers a limited number of threshold voltage options, which may not cater to all specific requirements.
  • Lack of adjustable features: The IC does not provide adjustable parameters, limiting customization possibilities.

Working Principles

The ADM1232ARNZ works by continuously monitoring the system voltage through the VTH pin. When the voltage falls below the specified threshold, the IC generates a reset signal on the RESET pin. This reset signal can be used to initiate system recovery or perform other necessary actions. The MR pin allows for manual resetting of the system, overriding the automatic reset generation.

Detailed Application Field Plans

The ADM1232ARNZ is commonly used in various applications where accurate voltage monitoring and reset generation are critical. Some of the typical application fields include:

  1. Microcontrollers and embedded systems
  2. Industrial automation and control systems
  3. Power management circuits
  4. Battery-powered devices
  5. Automotive electronics

Detailed and Complete Alternative Models

  • MAX1232ESA: Similar voltage monitor and reset generator IC from Maxim Integrated.
  • LTC2937IDD#PBF: Precision voltage monitor and reset IC from Linear Technology.
  • TPS3808G01DBVR: Ultra-low-power voltage supervisor IC from Texas Instruments.

These alternative models offer similar functionality and can be considered as alternatives to the ADM1232ARNZ based on specific requirements and preferences.

(Note: The word count of this response is 346 words)

Enumere 10 preguntas y respuestas comunes relacionadas con la aplicación de ADM1232ARNZ en soluciones técnicas

Sure! Here are 10 common questions and answers related to the application of ADM1232ARNZ in technical solutions:

  1. Q: What is ADM1232ARNZ? A: ADM1232ARNZ is a supervisory circuit that monitors the power supply voltage in electronic systems.

  2. Q: What is the purpose of ADM1232ARNZ? A: The purpose of ADM1232ARNZ is to ensure proper system operation by monitoring the power supply voltage and generating reset signals when necessary.

  3. Q: How does ADM1232ARNZ monitor the power supply voltage? A: ADM1232ARNZ compares the power supply voltage with a preset threshold and generates a reset signal if the voltage falls below the threshold.

  4. Q: Can ADM1232ARNZ be used in battery-powered applications? A: Yes, ADM1232ARNZ can be used in battery-powered applications as it operates over a wide voltage range and has low power consumption.

  5. Q: What is the typical operating voltage range for ADM1232ARNZ? A: The typical operating voltage range for ADM1232ARNZ is from 2.7V to 5.5V.

  6. Q: Does ADM1232ARNZ have any built-in delay for generating reset signals? A: Yes, ADM1232ARNZ has a fixed delay of typically 140ms before generating a reset signal after the power supply voltage falls below the threshold.

  7. Q: Can ADM1232ARNZ generate multiple reset signals? A: No, ADM1232ARNZ generates a single reset signal that remains active until the power supply voltage rises above the threshold.

  8. Q: Is ADM1232ARNZ suitable for use in safety-critical applications? A: Yes, ADM1232ARNZ is suitable for safety-critical applications as it has a watchdog timer that can detect and recover from system failures.

  9. Q: Can ADM1232ARNZ be used in high-temperature environments? A: Yes, ADM1232ARNZ is designed to operate over a wide temperature range of -40°C to +85°C, making it suitable for high-temperature environments.

  10. Q: Are there any additional features or functionalities of ADM1232ARNZ? A: Yes, ADM1232ARNZ also includes a manual reset input, power supply glitch immunity, and low power consumption in standby mode.

Please note that these answers are general and may vary depending on the specific application and requirements.