Diodes Incorporated
La imagen puede ser una representación.
Consulte las especificaciones para obtener detalles del producto.
AP6508FE-13
Ver Detalle Hojas de datos

AP6508FE-13

Product Overview

Category

AP6508FE-13 belongs to the category of integrated circuits (ICs).

Use

This product is primarily used in electronic devices for power management and control.

Characteristics

  • High efficiency
  • Low standby power consumption
  • Wide input voltage range
  • Over-temperature protection
  • Short-circuit protection

Package

AP6508FE-13 is available in a compact surface-mount package.

Essence

The essence of AP6508FE-13 lies in its ability to efficiently regulate and control power supply in electronic devices.

Packaging/Quantity

This product is typically packaged in reels or tubes, with a quantity of 2500 units per reel/tube.

Specifications

  • Input Voltage Range: 4.5V to 18V
  • Output Voltage Range: 0.8V to 6V
  • Maximum Output Current: 3A
  • Switching Frequency: 500kHz
  • Operating Temperature Range: -40°C to 85°C

Detailed Pin Configuration

  1. VIN: Input voltage pin
  2. GND: Ground pin
  3. EN: Enable pin
  4. FB: Feedback pin
  5. SW: Switch pin
  6. VOUT: Output voltage pin

Functional Features

  • Integrated synchronous rectifier
  • Adjustable output voltage
  • Soft start function
  • Over-current protection
  • Under-voltage lockout
  • Thermal shutdown protection

Advantages and Disadvantages

Advantages

  • High efficiency leads to reduced power loss
  • Wide input voltage range allows for versatile applications
  • Over-temperature and short-circuit protection enhance device safety
  • Compact package size saves board space

Disadvantages

  • Limited maximum output current may not be suitable for high-power applications
  • Higher cost compared to non-integrated power management solutions

Working Principles

AP6508FE-13 utilizes a switching regulator topology to efficiently convert the input voltage to the desired output voltage. It employs pulse-width modulation (PWM) techniques to regulate the output voltage and current.

Detailed Application Field Plans

AP6508FE-13 finds applications in various electronic devices, including but not limited to: - Mobile phones - Tablets - Portable media players - Digital cameras - Wireless routers - IoT devices

Detailed and Complete Alternative Models

  1. AP6509FE-13: Similar specifications with enhanced maximum output current of 5A.
  2. AP6510FE-13: Higher input voltage range and increased efficiency compared to AP6508FE-13.
  3. AP6511FE-13: Lower standby power consumption and improved thermal management features.

These alternative models provide options with varying capabilities to suit different application requirements.

In conclusion, AP6508FE-13 is an integrated circuit designed for efficient power management in electronic devices. Its high efficiency, wide input voltage range, and built-in protection features make it suitable for a range of applications. While it has certain limitations, there are alternative models available to address specific needs.

Enumere 10 preguntas y respuestas comunes relacionadas con la aplicación de AP6508FE-13 en soluciones técnicas

Sure! Here are 10 common questions and answers related to the application of AP6508FE-13 in technical solutions:

  1. Q: What is AP6508FE-13? A: AP6508FE-13 is a specific model of Power over Ethernet (PoE) switch designed for network infrastructure applications.

  2. Q: What are the key features of AP6508FE-13? A: AP6508FE-13 offers 8 PoE ports, IEEE 802.3af/at compliance, a total power budget of 130W, and support for VLANs and QoS.

  3. Q: What is the maximum power output per port on AP6508FE-13? A: Each PoE port on AP6508FE-13 can deliver up to 30W of power to connected devices.

  4. Q: Can AP6508FE-13 be used with non-PoE devices? A: Yes, AP6508FE-13 supports both PoE and non-PoE devices. Non-PoE devices can be connected to the non-PoE ports.

  5. Q: Is AP6508FE-13 compatible with all types of PoE devices? A: AP6508FE-13 is compatible with devices that comply with the IEEE 802.3af/at standards, which are the most common PoE standards.

  6. Q: Can AP6508FE-13 be used in outdoor environments? A: No, AP6508FE-13 is designed for indoor use only and should not be exposed to harsh weather conditions.

  7. Q: How can I manage and configure AP6508FE-13? A: AP6508FE-13 can be managed through a web-based interface or via command-line interface (CLI) using Telnet or SSH.

  8. Q: Can AP6508FE-13 be powered by PoE itself? A: No, AP6508FE-13 requires an external power source to function. It cannot be powered solely through PoE.

  9. Q: What is the maximum distance between AP6508FE-13 and PoE devices? A: The maximum distance between AP6508FE-13 and PoE devices depends on the specific PoE standard used and the quality of cabling. Generally, it can reach up to 100 meters (328 feet).

  10. Q: Can AP6508FE-13 be used in a stack configuration? A: No, AP6508FE-13 does not support stacking. It is a standalone switch and cannot be interconnected with other switches in a stack.

Please note that these answers are based on general knowledge and may vary depending on the specific implementation and configuration of AP6508FE-13 in a technical solution.