Diodes Incorporated
La imagen puede ser una representación.
Consulte las especificaciones para obtener detalles del producto.
BAT54BRW-7
Ver Detalle Hojas de datos

BAT54BRW-7

Product Overview

The BAT54BRW-7 is a Schottky barrier diode belonging to the semiconductor category. It is commonly used in electronic circuits for its unique characteristics, and it comes in a package that typically contains multiple units. This diode is known for its high-speed switching capabilities, low forward voltage drop, and minimal reverse recovery time.

Basic Information

  • Category: Semiconductor
  • Use: High-speed switching in electronic circuits
  • Characteristics: Low forward voltage drop, high switching speed, minimal reverse recovery time
  • Package: Typically available in a SOT-323 package containing multiple units
  • Essence: Schottky barrier diode
  • Packaging/Quantity: Varies based on manufacturer and supplier

Specifications

  • Forward Voltage Drop: Typically around 0.32V at 1mA
  • Reverse Voltage: Up to 30V
  • Maximum Continuous Forward Current: Approximately 200mA
  • Operating Temperature Range: -65°C to +125°C

Detailed Pin Configuration

The BAT54BRW-7 typically has three pins: anode, cathode, and common terminal. The pinout configuration is as follows: - Pin 1 (Anode) - Pin 2 (Common Terminal) - Pin 3 (Cathode)

Functional Features

  • High-speed switching
  • Low forward voltage drop
  • Minimal reverse recovery time
  • Compact SOT-323 package

Advantages and Disadvantages

Advantages

  • Fast switching speed
  • Low power dissipation
  • Small form factor
  • Suitable for high-frequency applications

Disadvantages

  • Limited maximum reverse voltage
  • Sensitivity to overvoltage conditions

Working Principles

The BAT54BRW-7 operates based on the Schottky barrier principle, where the metal-semiconductor junction allows for fast switching due to the absence of minority carrier storage time. When a forward bias is applied, the diode conducts with minimal voltage drop, making it suitable for high-speed applications.

Detailed Application Field Plans

The BAT54BRW-7 is widely used in various electronic applications, including: - RF mixers and detectors - High-speed data line protection - Signal clamping and steering - Voltage rectification in switch-mode power supplies

Detailed and Complete Alternative Models

  • BAT54S: Similar characteristics with different packaging
  • BAT54A: Higher reverse voltage rating
  • BAT54C: Lower forward voltage drop

In conclusion, the BAT54BRW-7 Schottky barrier diode offers high-speed switching capabilities and low forward voltage drop, making it suitable for a wide range of electronic applications. Its compact size and efficient performance make it a popular choice for designers seeking reliable semiconductor solutions.

[Word Count: 409]

Enumere 10 preguntas y respuestas comunes relacionadas con la aplicación de BAT54BRW-7 en soluciones técnicas

  1. What is the BAT54BRW-7?

    • The BAT54BRW-7 is a dual common cathode Schottky barrier diode in a SOT-363 package.

  2. What are the typical applications of the BAT54BRW-7?

    • The BAT54BRW-7 is commonly used in high-speed switching, RF mixer, and low-loss rectification applications.

  3. What is the maximum forward voltage of the BAT54BRW-7?

    • The maximum forward voltage of the BAT54BRW-7 is typically around 0.5V at a forward current of 100mA.

  4. What is the reverse breakdown voltage of the BAT54BRW-7?

    • The reverse breakdown voltage of the BAT54BRW-7 is typically around 30V.

  5. What is the maximum forward current of the BAT54BRW-7?

    • The maximum forward continuous current of the BAT54BRW-7 is typically around 200mA.

  6. What are the key features of the BAT54BRW-7?

    • The BAT54BRW-7 features low forward voltage drop, fast switching speed, and high reliability.

  7. Can the BAT54BRW-7 be used for signal demodulation?

    • Yes, the BAT54BRW-7 can be used for signal demodulation due to its fast switching characteristics.

  8. Is the BAT54BRW-7 suitable for high-frequency applications?

    • Yes, the BAT54BRW-7 is suitable for high-frequency applications such as RF mixers and detectors.

  9. What are the temperature considerations for the BAT54BRW-7?

    • The BAT54BRW-7 has a wide operating temperature range, typically from -65°C to 125°C.

  10. Are there any specific layout considerations when using the BAT54BRW-7?

    • It is recommended to minimize the length of the PCB traces connected to the BAT54BRW-7 to reduce parasitic effects and ensure optimal performance.