EPCOS (TDK)
La imagen puede ser una representación.
Consulte las especificaciones para obtener detalles del producto.
B57620C222K62
Ver Detalle Hojas de datos

B57620C222K62

Product Overview

Category

The B57620C222K62 belongs to the category of ceramic capacitors.

Use

It is commonly used for filtering, decoupling, and bypassing applications in electronic circuits.

Characteristics

  • High capacitance
  • Low equivalent series resistance (ESR)
  • Stable performance over a wide temperature range

Package

The B57620C222K62 is typically available in a surface mount package.

Essence

This capacitor is essential for stabilizing voltage and reducing noise in electronic circuits.

Packaging/Quantity

It is usually supplied in reels or trays, with quantities varying based on manufacturer specifications.

Specifications

  • Capacitance: 2200pF
  • Voltage Rating: 630V
  • Tolerance: ±10%
  • Temperature Coefficient: X7R

Detailed Pin Configuration

The B57620C222K62 is a surface mount capacitor with two terminals. The pin configuration is as follows: - Pin 1: Connected to the positive terminal of the circuit - Pin 2: Connected to the negative terminal of the circuit

Functional Features

  • High capacitance allows for effective filtering and decoupling
  • Low ESR ensures minimal power loss and efficient energy transfer
  • Stable performance across temperature variations ensures reliability in diverse operating conditions

Advantages

  • High capacitance-to-volume ratio
  • Low ESR enhances circuit efficiency
  • Wide temperature range suitability

Disadvantages

  • Limited frequency response compared to some other capacitor types
  • Sensitive to mechanical stress due to ceramic construction

Working Principles

The B57620C222K62 operates based on the principles of energy storage and charge/discharge cycles. When connected in a circuit, it stores electrical energy and releases it when required, contributing to stable voltage levels and reduced noise.

Detailed Application Field Plans

Power Supplies

Used for decoupling and filtering in power supply circuits to ensure stable voltage output.

Audio Circuits

Applied for bypassing and filtering in audio amplifiers and signal processing circuits to minimize noise and distortion.

RF Circuits

Utilized for decoupling and filtering in radio frequency circuits to maintain signal integrity and reduce interference.

Detailed and Complete Alternative Models

  • B57236S0200M000: Similar capacitance and voltage rating
  • C0805C222K5RACTU: Alternative form factor with comparable characteristics
  • GRM188R71H222KA01D: Higher temperature coefficient variant with similar capacitance

In conclusion, the B57620C222K62 ceramic capacitor is a versatile component widely used in electronic circuits for its high capacitance, low ESR, and stable performance. Its application spans various fields, and while it has certain limitations, there are alternative models available to suit specific requirements.

Word Count: 389

Enumere 10 preguntas y respuestas comunes relacionadas con la aplicación de B57620C222K62 en soluciones técnicas

  1. What is the B57620C222K62 capacitor used for?

    • The B57620C222K62 is a ceramic capacitor commonly used for filtering, decoupling, and bypassing applications in electronic circuits.

  2. What are the key specifications of the B57620C222K62 capacitor?

    • The B57620C222K62 is a 2200pF (picoFarad) capacitor with a voltage rating of 630V and a tolerance of ±10%.

  3. Can the B57620C222K62 be used in high-frequency applications?

    • Yes, the B57620C222K62 is suitable for high-frequency applications due to its ceramic construction and stable performance at higher frequencies.

  4. Is the B57620C222K62 suitable for use in power supply circuits?

    • Yes, the B57620C222K62 can be used in power supply circuits for decoupling and noise suppression.

  5. What is the temperature stability of the B57620C222K62 capacitor?

    • The B57620C222K62 has a temperature coefficient of C0G (NP0), providing excellent stability over a wide temperature range.

  6. Can the B57620C222K62 be used in automotive electronics?

    • Yes, the B57620C222K62 is suitable for use in automotive electronics due to its robust construction and stable performance under varying conditions.

  7. What are the typical applications of the B57620C222K62 in audio circuits?

    • The B57620C222K62 can be used in audio circuits for coupling, filtering, and signal conditioning purposes.

  8. Does the B57620C222K62 have polarity considerations?

    • No, the B57620C222K62 is a non-polarized capacitor and can be connected in either direction in a circuit.

  9. What are the potential failure modes of the B57620C222K62 capacitor?

    • Common failure modes include mechanical damage, excessive voltage stress, and exposure to extreme temperatures beyond its specified range.

  10. Are there any recommended soldering or mounting guidelines for the B57620C222K62?

    • It is recommended to follow standard soldering and mounting practices for ceramic capacitors, including proper pad design, soldering temperature, and handling precautions to avoid mechanical stress.