EPCOS (TDK)
La imagen puede ser una representación.
Consulte las especificaciones para obtener detalles del producto.
B72210S0110K151
Ver Detalle Hojas de datos

B72210S0110K151

Product Overview

Category

The B72210S0110K151 belongs to the category of varistors, which are electronic components used to protect circuits from excessive voltage.

Use

It is used to suppress transient voltage spikes and limit the voltage that is applied to sensitive electronic components.

Characteristics

  • Voltage Regulation: The varistor can regulate the voltage to protect the circuit.
  • Fast Response Time: It responds quickly to voltage surges.
  • High Energy Absorption Capacity: Capable of absorbing high levels of energy during a surge.
  • Reliability: Provides reliable protection for electronic circuits.

Package

The B72210S0110K151 comes in a cylindrical package with leads for easy installation on a circuit board.

Essence

The essence of this varistor is to protect electronic circuits from voltage surges and transients.

Packaging/Quantity

It is typically packaged in reels or trays and is available in various quantities depending on the manufacturer's specifications.

Specifications

  • Model: B72210S0110K151
  • Maximum Allowable Voltage: 110V
  • Nominal Diameter: 7mm
  • Maximum Surge Current: 6kA
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The B72210S0110K151 has two leads for connection to the circuit. The pin configuration is as follows: - Pin 1: Anode - Pin 2: Cathode

Functional Features

  • Voltage Clamping: When the voltage exceeds the threshold, the varistor conducts current to limit the voltage.
  • Transient Suppression: It suppresses transient voltage spikes to protect the connected circuitry.
  • Non-linear Response: Exhibits a non-linear voltage-current characteristic, providing effective protection against voltage surges.

Advantages and Disadvantages

Advantages

  • Effective protection against voltage surges
  • Fast response time
  • High energy absorption capacity

Disadvantages

  • Limited lifespan after multiple surge events
  • Can degrade over time with repeated exposure to surges

Working Principles

The varistor works based on the principle of voltage-dependent resistance. When the voltage across the varistor exceeds a certain threshold, it starts conducting, effectively shunting the excess current away from the protected circuit.

Detailed Application Field Plans

The B72210S0110K151 is commonly used in the following applications: - Power supply units - Telecommunication equipment - Industrial control systems - Consumer electronics

Detailed and Complete Alternative Models

Some alternative models to the B72210S0110K151 include: - B72210S0271K101 - B72210S0381K101 - B72210S0501K101

In conclusion, the B72210S0110K151 varistor provides essential protection for electronic circuits by suppressing transient voltage spikes and limiting excessive voltage. Its fast response time and high energy absorption capacity make it a valuable component in various electronic applications.

[Word Count: 410]

Enumere 10 preguntas y respuestas comunes relacionadas con la aplicación de B72210S0110K151 en soluciones técnicas

  1. What is the B72210S0110K151?

    • The B72210S0110K151 is a type of varistor, also known as a voltage-dependent resistor, that is commonly used in electronic circuits to protect against overvoltage conditions.

  2. What are the key specifications of the B72210S0110K151?

    • The B72210S0110K151 has a maximum AC voltage of 130V, a maximum DC voltage of 175V, and a nominal varistor voltage of 110V.

  3. How does the B72210S0110K151 function in technical solutions?

    • The B72210S0110K151 acts as a voltage-clamping device, conducting significant current when the applied voltage exceeds its nominal voltage, thereby protecting sensitive components in the circuit.

  4. In what applications is the B72210S0110K151 commonly used?

    • The B72210S0110K151 is often employed in power supplies, industrial equipment, telecommunications devices, and automotive electronics to safeguard against transient voltage spikes.

  5. What are the advantages of using the B72210S0110K151 in technical solutions?

    • This varistor offers fast response times, high surge current capability, and reliability in suppressing voltage transients, making it an effective choice for circuit protection.

  6. How should the B72210S0110K151 be integrated into a circuit?

    • The B72210S0110K151 should be connected in parallel with the component or circuit to be protected, ensuring that it can divert excess voltage away from sensitive elements.

  7. What are the temperature considerations for the B72210S0110K151?

    • The B72210S0110K151 has a wide operating temperature range, typically from -40°C to 85°C, allowing it to function effectively in various environmental conditions.

  8. Are there any limitations or precautions when using the B72210S0110K151?

    • It's important to ensure that the B72210S0110K151 is not exposed to voltages exceeding its maximum ratings, as this could compromise its protective capabilities.

  9. Can multiple B72210S0110K151 varistors be used in parallel for enhanced protection?

    • Yes, multiple varistors can be employed in parallel to increase the clamping capability and distribute the current during overvoltage events.

  10. Where can I find detailed technical information about the B72210S0110K151?

    • Detailed datasheets and application notes for the B72210S0110K151 can be obtained from the manufacturer's website or authorized distributors, providing comprehensive information for its integration into technical solutions.