Exar Corporation
La imagen puede ser una representación.
Consulte las especificaciones para obtener detalles del producto.
ST16C650ACQ48-F
Ver Detalle Hojas de datos

ST16C650ACQ48-F

Product Overview

Category

ST16C650ACQ48-F belongs to the category of integrated circuits (ICs).

Use

This IC is commonly used for serial communication applications.

Characteristics

  • High-speed UART (Universal Asynchronous Receiver/Transmitter) with 128-byte FIFO (First-In, First-Out) buffers.
  • Supports data rates up to 1 Mbps.
  • Compatible with various microcontrollers and processors.
  • Low power consumption.
  • Wide operating voltage range.
  • Robust and reliable performance.

Package

ST16C650ACQ48-F is available in a 48-pin quad flat package (QFP).

Essence

The essence of this product lies in its ability to facilitate efficient and reliable serial communication between different electronic devices.

Packaging/Quantity

ST16C650ACQ48-F is typically packaged in reels or tubes. The exact quantity per package may vary depending on the supplier.

Specifications

  • Supply Voltage: 3.3V
  • Data Rate: Up to 1 Mbps
  • Operating Temperature Range: -40°C to +85°C
  • Number of Pins: 48
  • FIFO Buffer Size: 128 bytes
  • Interface: UART

Detailed Pin Configuration

The pin configuration of ST16C650ACQ48-F is as follows:

```

Pin Name Description

1 VCC Power Supply 2 GND Ground 3 TXD Transmit Data 4 RXD Receive Data 5 RTS Request To Send 6 CTS Clear To Send 7 DSR Data Set Ready 8 DCD Data Carrier Detect 9 RI Ring Indicator 10 INT Interrupt Output ... ```

(Note: This is just a partial pin configuration. The complete pinout can be found in the product datasheet.)

Functional Features

  • Full-duplex serial communication.
  • Hardware and software flow control.
  • Programmable baud rate generator.
  • Automatic hardware and software reset.
  • Error detection and handling mechanisms.
  • Support for various data formats (e.g., 7/8-bit data, parity, stop bits).

Advantages and Disadvantages

Advantages

  • High-speed data transfer.
  • Compatibility with different microcontrollers and processors.
  • Robust performance even in harsh environments.
  • Low power consumption.
  • Large FIFO buffers for efficient data handling.

Disadvantages

  • Requires external components for complete functionality.
  • Limited availability of alternative models.

Working Principles

ST16C650ACQ48-F operates based on the principles of UART communication. It receives and transmits data in a serial format using specific protocols and timings. The IC handles various aspects of data transmission, such as buffering, error detection, and flow control, to ensure reliable communication between devices.

Detailed Application Field Plans

ST16C650ACQ48-F finds applications in a wide range of industries and fields, including: - Industrial automation - Telecommunications - Embedded systems - Consumer electronics - Medical devices - Automotive electronics

The IC is suitable for any application that requires serial communication between electronic devices.

Detailed and Complete Alternative Models

While ST16C650ACQ48-F is a popular choice for many applications, there are alternative models available from different manufacturers. Some notable alternatives include: - MAX3232 by Maxim Integrated - SC16C550BIB80 by NXP Semiconductors - XR16M2550IM48-F by Exar Corporation

These alternatives offer similar functionalities and can be considered based on specific requirements and availability.

(Note: This list is not exhaustive, and it is recommended to consult the latest market offerings for a comprehensive list of alternative models.)

Word Count: 530

Enumere 10 preguntas y respuestas comunes relacionadas con la aplicación de ST16C650ACQ48-F en soluciones técnicas

Sure! Here are 10 common questions and answers related to the application of ST16C650ACQ48-F in technical solutions:

  1. Question: What is the ST16C650ACQ48-F?
    Answer: The ST16C650ACQ48-F is a UART (Universal Asynchronous Receiver/Transmitter) integrated circuit that provides serial communication capabilities in technical solutions.

  2. Question: What is the purpose of the ST16C650ACQ48-F in technical solutions?
    Answer: The ST16C650ACQ48-F is used to enable serial communication between different components or devices in a technical solution, allowing data transfer over a serial interface.

  3. Question: What are the key features of the ST16C650ACQ48-F?
    Answer: Some key features of the ST16C650ACQ48-F include support for various baud rates, multiple data formats, interrupt capabilities, and compatibility with different microcontrollers or processors.

  4. Question: How can I interface the ST16C650ACQ48-F with a microcontroller or processor?
    Answer: The ST16C650ACQ48-F typically uses a standard parallel interface (such as an 8-bit or 16-bit bus) to communicate with a microcontroller or processor. It requires specific control signals for data transfer.

  5. Question: Can the ST16C650ACQ48-F be used in both full-duplex and half-duplex communication modes?
    Answer: Yes, the ST16C650ACQ48-F supports both full-duplex and half-duplex communication modes, allowing bidirectional data transfer.

  6. Question: What voltage levels does the ST16C650ACQ48-F operate at?
    Answer: The ST16C650ACQ48-F operates at a voltage range of 3.3V to 5V, making it compatible with a wide range of microcontrollers or processors.

  7. Question: Does the ST16C650ACQ48-F support flow control mechanisms?
    Answer: Yes, the ST16C650ACQ48-F supports hardware flow control mechanisms such as RTS/CTS (Request to Send/Clear to Send) and DTR/DSR (Data Terminal Ready/Data Set Ready).

  8. Question: Can I use multiple ST16C650ACQ48-F devices in parallel for increased serial communication capabilities?
    Answer: Yes, you can use multiple ST16C650ACQ48-F devices in parallel to increase the number of serial communication channels in your technical solution.

  9. Question: Is the ST16C650ACQ48-F suitable for industrial applications?
    Answer: Yes, the ST16C650ACQ48-F is designed to meet the requirements of industrial applications, offering robustness and reliability in harsh environments.

  10. Question: Are there any development tools or resources available for programming and configuring the ST16C650ACQ48-F?
    Answer: Yes, STMicroelectronics provides software development kits (SDKs), application notes, and datasheets that can help you program and configure the ST16C650ACQ48-F effectively in your technical solution.

Please note that the answers provided here are general and may vary depending on specific implementation details and requirements. It's always recommended to refer to the official documentation and datasheets for accurate information.