XR16V2551ILTR-F

Basic Information Overview

• Category: Integrated Circuit (IC)
• Use: Serial Communication Controller
• Characteristics: High-speed, Low-power, Versatile
• Package: 48-pin LQFP (Quad Flat Package)
• Essence: Facilitates serial communication between microcontrollers and peripheral devices
• Packaging/Quantity: Tape and Reel, 2500 units per reel

Specifications

• Supply Voltage: 3.3V
• Operating Temperature Range: -40°C to +85°C
• Data Rate: Up to 3 Mbps
• Number of Channels: 2
• Interface: UART (Universal Asynchronous Receiver Transmitter)
• Supported Protocols: RS-232, RS-422, RS-485

Detailed Pin Configuration

The XR16V2551ILTR-F has a total of 48 pins. The pin configuration is as follows:

| Pin Number | Pin Name | Function | |------------|----------|----------| | 1 | VCC | Power Supply (3.3V) | | 2 | GND | Ground | | 3 | TXD1 | Transmit Data for Channel 1 | | 4 | RXD1 | Receive Data for Channel 1 | | ... | ... | ... | | 47 | TXD2 | Transmit Data for Channel 2 | | 48 | RXD2 | Receive Data for Channel 2 |

Functional Features

• Dual-channel UART with independent data buffers
• Supports full-duplex communication
• Automatic hardware flow control
• Programmable baud rate generator
• Interrupt-driven operation for efficient data handling
• Built-in FIFO (First-In-First-Out) buffers for improved performance
• Supports various serial protocols (RS-232, RS-422, RS-485)

Advantages and Disadvantages

Advantages: - High-speed data transfer up to 3 Mbps - Low-power consumption for energy-efficient applications - Versatile interface supporting multiple protocols - Dual-channel capability for simultaneous communication

Disadvantages: - Limited number of channels (2) - Requires external components for voltage level conversion in certain protocols

Working Principles

The XR16V2551ILTR-F is a serial communication controller that enables the exchange of data between microcontrollers and peripheral devices. It operates based on the UART principle, which converts parallel data into serial format for transmission and vice versa. The IC incorporates features like hardware flow control, interrupt-driven operation, and FIFO buffers to ensure efficient and reliable data transfer.

Detailed Application Field Plans

The XR16V2551ILTR-F finds applications in various fields where serial communication is required. Some of the detailed application field plans include: 1. Industrial Automation: Used for connecting PLCs (Programmable Logic Controllers) with sensors, actuators, and other industrial devices. 2. Telecommunications: Enables communication between network equipment, such as routers, switches, and modems. 3. Automotive Electronics: Facilitates data exchange between automotive control units, sensors, and displays. 4. Medical Devices: Used in medical equipment for transmitting data from sensors, monitoring devices, and diagnostic tools. 5. Consumer Electronics: Enables communication between microcontrollers and peripherals in devices like printers, scanners, and digital cameras.

Detailed and Complete Alternative Models

1. XR16M2551ILTR-F: Similar to XR16V2551ILTR-F but with extended temperature range (-40°C to +105°C).
2. XR16L2551ILTR-F: Low-power variant of XR16V2551ILTR-F with reduced power consumption.
3. XR16C2551ILTR-F: Cost-effective alternative with limited features but suitable for basic serial communication needs.

Note: The above alternative models are from the same XR16 series and offer similar functionality with slight variations in specifications.

Word count: 480 words