Fremont Micro Devices Ltd
La imagen puede ser una representación.
Consulte las especificaciones para obtener detalles del producto.
FT24C04A-KNR-T
Ver Detalle Hojas de datos

FT24C04A-KNR-T

Product Overview

Category

The FT24C04A-KNR-T belongs to the category of electronic memory devices.

Use

This product is primarily used for data storage and retrieval in various electronic systems.

Characteristics

  • Non-volatile memory: The FT24C04A-KNR-T retains stored data even when power is disconnected.
  • High capacity: This device has a storage capacity of 4 kilobits (512 bytes).
  • I2C interface: It utilizes the I2C communication protocol for easy integration into existing systems.
  • Low power consumption: The FT24C04A-KNR-T operates at low power levels, making it suitable for battery-powered applications.

Package

The FT24C04A-KNR-T is available in a compact SOP-8 package.

Essence

This product serves as a reliable and efficient solution for storing and accessing data in electronic systems.

Packaging/Quantity

The FT24C04A-KNR-T is typically packaged in reels containing a quantity of 2500 units.

Specifications

  • Memory capacity: 4 kilobits (512 bytes)
  • Operating voltage: 1.7V to 5.5V
  • Operating temperature range: -40°C to +85°C
  • Data retention: 10 years
  • Write endurance: 1 million cycles
  • Interface: I2C

Detailed Pin Configuration

The FT24C04A-KNR-T features an SOP-8 package with the following pin configuration:

  1. A0: Address input bit 0
  2. A1: Address input bit 1
  3. A2: Address input bit 2
  4. GND: Ground
  5. SDA: Serial data input/output
  6. SCL: Serial clock input
  7. WP: Write protect
  8. VCC: Power supply

Functional Features

  • Random access: The FT24C04A-KNR-T allows for random read and write operations, enabling efficient data manipulation.
  • Hardware write protection: The WP pin can be used to protect the memory from accidental writes.
  • Sequential read operation: This device supports sequential read operations, allowing for faster data retrieval.

Advantages and Disadvantages

Advantages

  • Non-volatile memory ensures data retention even during power loss.
  • High storage capacity for various applications.
  • Low power consumption extends battery life in portable devices.
  • I2C interface simplifies integration into existing systems.

Disadvantages

  • Limited storage capacity compared to higher-end memory devices.
  • Relatively slower write speeds compared to some other memory technologies.

Working Principles

The FT24C04A-KNR-T utilizes electrically erasable programmable read-only memory (EEPROM) technology. It stores data by trapping charges in floating gate transistors, which can be electrically erased and reprogrammed. The I2C interface facilitates communication between the device and the host system, enabling seamless data transfer.

Detailed Application Field Plans

The FT24C04A-KNR-T finds application in various electronic systems, including but not limited to: - Consumer electronics - Automotive electronics - Industrial control systems - Medical devices - Smart home appliances

Detailed and Complete Alternative Models

  1. FT24C01A-KNR-T: 2 kilobits (256 bytes) memory capacity
  2. FT24C02A-KNR-T: 4 kilobits (512 bytes) memory capacity
  3. FT24C08A-KNR-T: 8 kilobits (1024 bytes) memory capacity
  4. FT24C16A-KNR-T: 16 kilobits (2048 bytes) memory capacity
  5. FT24C32A-KNR-T: 32 kilobits (4096 bytes) memory capacity

These alternative models offer varying memory capacities to suit different application requirements.

Word count: 536 words

Enumere 10 preguntas y respuestas comunes relacionadas con la aplicación de FT24C04A-KNR-T en soluciones técnicas

Sure! Here are 10 common questions and answers related to the application of FT24C04A-KNR-T in technical solutions:

  1. Q: What is the FT24C04A-KNR-T? A: The FT24C04A-KNR-T is a 4Kbit (512 x 8) serial EEPROM (Electrically Erasable Programmable Read-Only Memory) IC.

  2. Q: What is the purpose of using the FT24C04A-KNR-T in technical solutions? A: The FT24C04A-KNR-T is commonly used for storing small amounts of non-volatile data in various electronic devices, such as microcontrollers, sensors, and other embedded systems.

  3. Q: How does the FT24C04A-KNR-T communicate with other components in a system? A: The FT24C04A-KNR-T uses an I2C (Inter-Integrated Circuit) interface for communication, which allows it to connect with other devices using only two wires.

  4. Q: What is the maximum storage capacity of the FT24C04A-KNR-T? A: The FT24C04A-KNR-T has a storage capacity of 4 kilobits, which is equivalent to 512 bytes or 4096 bits.

  5. Q: Can the FT24C04A-KNR-T be easily integrated into existing circuit designs? A: Yes, the FT24C04A-KNR-T comes in a standard 8-pin DIP (Dual Inline Package) or SOIC (Small Outline Integrated Circuit) package, making it compatible with most circuit layouts.

  6. Q: Is the FT24C04A-KNR-T capable of operating at different voltage levels? A: Yes, the FT24C04A-KNR-T supports a wide voltage range of 1.7V to 5.5V, allowing it to work with various power supply configurations.

  7. Q: Can the FT24C04A-KNR-T withstand harsh environmental conditions? A: The FT24C04A-KNR-T has an extended temperature range of -40°C to +85°C, making it suitable for use in both industrial and automotive applications.

  8. Q: Does the FT24C04A-KNR-T have any built-in security features? A: Yes, the FT24C04A-KNR-T provides hardware write protection, which allows you to protect specific memory areas from accidental or unauthorized modifications.

  9. Q: How fast can data be read from or written to the FT24C04A-KNR-T? A: The FT24C04A-KNR-T supports a maximum clock frequency of 400kHz, enabling fast data transfer between the EEPROM and other devices.

  10. Q: Are there any application notes or reference designs available for the FT24C04A-KNR-T? A: Yes, the manufacturer provides detailed documentation, including datasheets, application notes, and reference designs, to assist with the integration and usage of the FT24C04A-KNR-T in technical solutions.

Please note that these answers are general and may vary depending on the specific requirements and implementation of the FT24C04A-KNR-T in different technical solutions.