The FT24C08A-UNR-T belongs to the category of integrated circuits (ICs).
This product is primarily used for non-volatile storage applications in various electronic devices.
The FT24C08A-UNR-T is available in a small form factor package, such as an SOP-8 (Small Outline Package) or similar. The exact package type may vary depending on the manufacturer. It is commonly sold in reels or tubes containing multiple units.
The FT24C08A-UNR-T has a standard pin configuration with eight pins. The following table provides a detailed description of each pin:
| Pin Number | Pin Name | Description | |------------|----------|-------------| | 1 | A0 | Address input bit 0 | | 2 | A1 | Address input bit 1 | | 3 | A2 | Address input bit 2 | | 4 | GND | Ground (0V) connection | | 5 | SDA | Serial Data Line (I2C) | | 6 | SCL | Serial Clock Line (I2C) | | 7 | WP | Write Protect (optional) | | 8 | VCC | Power supply voltage |
The FT24C08A-UNR-T utilizes EEPROM (Electrically Erasable Programmable Read-Only Memory) technology. It stores data by electrically charging or discharging specific memory cells within the IC. The I2C interface facilitates communication between the IC and other devices, allowing data to be read from or written to the memory.
The FT24C08A-UNR-T finds applications in various electronic devices that require non-volatile storage, such as: 1. Consumer electronics: Used in smart TVs, set-top boxes, and audio/video players for storing user preferences and settings. 2. Automotive systems: Employed in car infotainment systems, instrument clusters, and navigation units for data storage. 3. Industrial equipment: Utilized in control systems, sensors, and data loggers for storing critical information. 4. Medical devices: Integrated into medical instruments and monitoring systems for data retention. 5. Internet of Things (IoT): Incorporated in IoT devices for storing configuration data and sensor readings.
There are several alternative models available in the market that offer similar functionality to the FT24C08A-UNR-T. Some notable alternatives include: - AT24C08A - CAT24C08 - M24C08 - 24AA08
Sure! Here are 10 common questions and answers related to the application of FT24C08A-UNR-T in technical solutions:
Q: What is FT24C08A-UNR-T? A: FT24C08A-UNR-T is a specific model of EEPROM (Electrically Erasable Programmable Read-Only Memory) chip.
Q: What is the capacity of FT24C08A-UNR-T? A: FT24C08A-UNR-T has a capacity of 8 kilobits, which is equivalent to 1024 bytes or 8192 bits.
Q: What is the operating voltage range for FT24C08A-UNR-T? A: The operating voltage range for FT24C08A-UNR-T is typically between 1.7V and 5.5V.
Q: What is the maximum clock frequency supported by FT24C08A-UNR-T? A: FT24C08A-UNR-T supports a maximum clock frequency of 400 kHz.
Q: Can FT24C08A-UNR-T be used for storing program code? A: No, FT24C08A-UNR-T is primarily designed for storing small amounts of non-volatile data, such as configuration settings or calibration data.
Q: Is FT24C08A-UNR-T compatible with I2C communication protocol? A: Yes, FT24C08A-UNR-T uses the I2C (Inter-Integrated Circuit) communication protocol for interfacing with microcontrollers or other devices.
Q: Does FT24C08A-UNR-T have built-in write protection? A: Yes, FT24C08A-UNR-T provides hardware write protection by using a dedicated pin (WP) that can be controlled to prevent accidental writes.
Q: What is the typical endurance of FT24C08A-UNR-T? A: FT24C08A-UNR-T has a typical endurance of 1 million write cycles, meaning it can be written to and erased approximately 1 million times before failure.
Q: Can FT24C08A-UNR-T operate in extended temperature ranges? A: Yes, FT24C08A-UNR-T is designed to operate in extended temperature ranges, typically from -40°C to +85°C.
Q: Are there any specific precautions to consider when using FT24C08A-UNR-T? A: It is important to follow the recommended operating conditions, such as voltage levels and clock frequencies, provided in the datasheet to ensure proper functionality and reliability of FT24C08A-UNR-T.