La imagen puede ser una representación.
Consulte las especificaciones para obtener detalles del producto.
FT24C128A-UTG-T

FT24C128A-UTG-T

Product Overview

Category

The FT24C128A-UTG-T belongs to the category of integrated circuits (ICs) specifically designed for non-volatile memory storage.

Use

This product is primarily used for data storage in various electronic devices such as microcontrollers, computers, and consumer electronics.

Characteristics

  • Non-volatile: The FT24C128A-UTG-T retains stored data even when power is removed.
  • High capacity: It has a storage capacity of 128 kilobits (16 kilobytes).
  • Low power consumption: The product operates on low power, making it suitable for battery-powered devices.
  • I2C interface: It utilizes the I2C communication protocol for easy integration into existing systems.

Package

The FT24C128A-UTG-T is available in a small form-factor package, allowing for space-efficient integration onto circuit boards.

Essence

The essence of this product lies in its ability to provide reliable and non-volatile data storage in a compact and energy-efficient manner.

Packaging/Quantity

The FT24C128A-UTG-T is typically packaged in reels or trays, with each reel containing a specific quantity of units. The exact packaging and quantity may vary depending on the manufacturer's specifications.

Specifications

  • Memory Capacity: 128 kilobits (16 kilobytes)
  • Interface: I2C
  • Operating Voltage: 1.7V to 5.5V
  • Operating Temperature Range: -40°C to +85°C
  • Data Retention: Up to 10 years
  • Write Endurance: 1 million write cycles

Detailed Pin Configuration

The FT24C128A-UTG-T features a standard pin configuration for I2C memory devices:

  1. VCC: Power supply voltage
  2. GND: Ground
  3. SDA: Serial data line for I2C communication
  4. SCL: Serial clock line for I2C communication
  5. WP: Write protect pin (optional)
  6. A0, A1, A2: Address selection pins

Functional Features

  • Random Access: The FT24C128A-UTG-T allows for random access to stored data, enabling efficient retrieval and modification.
  • Page Write: It supports page write operations, allowing multiple bytes of data to be written in a single operation, enhancing write efficiency.
  • Hardware Write Protection: The optional write protect pin (WP) provides hardware-level protection against accidental data modification.
  • Software Control: The product can be controlled and accessed through software commands, providing flexibility in integration and usage.

Advantages and Disadvantages

Advantages

  • Non-volatile memory ensures data retention even during power loss.
  • High storage capacity for various applications.
  • Low power consumption extends battery life.
  • Compact form-factor enables space-efficient designs.
  • I2C interface simplifies integration into existing systems.

Disadvantages

  • Limited storage capacity compared to other memory technologies.
  • Slower write speeds compared to volatile memory types.
  • Susceptible to electromagnetic interference (EMI) due to its integrated circuit nature.

Working Principles

The FT24C128A-UTG-T utilizes electrically erasable programmable read-only memory (EEPROM) technology. It stores data by trapping electrical charges within floating gate transistors, ensuring data retention even when power is removed. The I2C interface facilitates communication between the device and the host system, allowing for data read and write operations.

Detailed Application Field Plans

The FT24C128A-UTG-T finds application in various fields, including but not limited to:

  1. Consumer Electronics: Used in smart TVs, set-top boxes, and audio systems for data storage of settings, preferences, and firmware updates.
  2. Automotive: Employed in vehicle infotainment systems, instrument clusters, and electronic control units (ECUs) for storing critical data and configurations.
  3. Industrial Automation: Utilized in programmable logic controllers (PLCs), sensors, and industrial control systems for storing calibration data, program parameters, and log files.

Detailed and Complete Alternative Models

  1. FT24C64A-UTG-T: A similar product with half the storage capacity (64 kilobits).
  2. FT24C256A-UTG-T: A higher-capacity alternative with double the storage capacity (256 kilobits).
  3. FT24C512A-UTG-T: An alternative model offering even greater storage capacity (512 kilobits).

These alternative models provide options to suit different application requirements.

Word count: 615 words

Enumere 10 preguntas y respuestas comunes relacionadas con la aplicación de FT24C128A-UTG-T en soluciones técnicas

Sure! Here are 10 common questions and answers related to the application of FT24C128A-UTG-T in technical solutions:

  1. Q: What is the FT24C128A-UTG-T? A: The FT24C128A-UTG-T is a 128Kbit (16K x 8) serial I2C EEPROM (Electrically Erasable Programmable Read-Only Memory) chip.

  2. Q: What is the purpose of using the FT24C128A-UTG-T in technical solutions? A: The FT24C128A-UTG-T is commonly used for storing small amounts of non-volatile data in various electronic devices, such as microcontrollers, sensors, and other embedded systems.

  3. Q: How does the FT24C128A-UTG-T connect to a microcontroller or other devices? A: The FT24C128A-UTG-T uses the I2C (Inter-Integrated Circuit) protocol for communication, which requires only two wires (SDA and SCL) to connect to the microcontroller or other devices.

  4. Q: What is the maximum storage capacity of the FT24C128A-UTG-T? A: The FT24C128A-UTG-T has a storage capacity of 128 kilobits, which is equivalent to 16 kilobytes or 16,384 bytes.

  5. Q: Can the FT24C128A-UTG-T be easily integrated into existing circuits? A: Yes, the FT24C128A-UTG-T comes in a standard 8-pin SOIC (Small Outline Integrated Circuit) package, making it easy to integrate into existing circuit designs.

  6. Q: Is the FT24C128A-UTG-T compatible with both 3.3V and 5V systems? A: Yes, the FT24C128A-UTG-T is designed to work with both 3.3V and 5V systems, making it versatile for a wide range of applications.

  7. Q: Can the FT24C128A-UTG-T operate in extreme temperature conditions? A: Yes, the FT24C128A-UTG-T has an extended temperature range of -40°C to +85°C, allowing it to function reliably in harsh environments.

  8. Q: Does the FT24C128A-UTG-T support hardware write protection? A: Yes, the FT24C128A-UTG-T provides built-in hardware write protection, which allows you to protect specific memory areas from accidental or unauthorized writes.

  9. Q: What is the typical data retention time of the FT24C128A-UTG-T? A: The FT24C128A-UTG-T has a typical data retention time of 10 years, ensuring that your stored data remains intact over long periods.

  10. Q: Are there any development tools or libraries available for programming the FT24C128A-UTG-T? A: Yes, various development tools and libraries are available, such as I2C EEPROM libraries for popular microcontroller platforms like Arduino, STM32, and PIC, making it easier to program and interface with the FT24C128A-UTG-T.

Please note that these answers are general and may vary depending on the specific requirements and implementation of the FT24C128A-UTG-T in different technical solutions.