Consulte las especificaciones para obtener detalles del producto.
GP2D008A120A
Product Overview
- Category: Sensor
- Use: Distance measurement
- Characteristics: Analog output, compact size
- Package: Compact housing
- Essence: Infrared distance sensor
- Packaging/Quantity: Individual unit packaging
Specifications
- Range: 10cm to 80cm
- Output: Analog voltage
- Supply Voltage: 4.5V to 5.5V
- Average Current Consumption: 33mA
- Operating Temperature: -10°C to 60°C
- Dimensions: 45.6mm x 20.4mm x 17.0mm
Detailed Pin Configuration
- Vcc (Power supply)
- GND (Ground)
- Vo (Analog output)
Functional Features
- Accurate distance measurement
- Compact and lightweight design
- Low power consumption
- Reliable performance in various lighting conditions
Advantages
- Wide operating range
- Easy integration into different systems
- Consistent and reliable measurements
Disadvantages
- Limited to short-range measurements
- Susceptible to interference from ambient infrared sources
Working Principles
The GP2D008A120A utilizes infrared light to measure the distance between the sensor and the target object. The sensor emits infrared light and measures the time it takes for the light to be reflected back to the sensor. This time is then converted into an analog voltage output, which corresponds to the distance between the sensor and the object.
Detailed Application Field Plans
- Robotics: Used for obstacle detection and avoidance in robotic applications.
- Proximity Sensing: Integrated into devices for proximity detection and activation.
- Automation: Incorporated into automated systems for precise object detection and positioning.
Detailed and Complete Alternative Models
- GP2Y0A21YK0F: Longer range infrared distance sensor with digital output.
- Sharp GP2Y0A02YK0F: Analog distance sensor with extended range capabilities.
In conclusion, the GP2D008A120A is a versatile infrared distance sensor suitable for various applications requiring accurate and reliable distance measurements within a short range.
Word Count: 314
Enumere 10 preguntas y respuestas comunes relacionadas con la aplicación de GP2D008A120A en soluciones técnicas
What is the GP2D008A120A sensor used for?
- The GP2D008A120A sensor is commonly used for distance measurement in technical solutions.
What is the operating voltage of the GP2D008A120A sensor?
- The operating voltage of the GP2D008A120A sensor is typically 4.5V to 5.5V.
How does the GP2D008A120A sensor measure distance?
- The GP2D008A120A sensor uses infrared light to measure distance based on the reflection time of the emitted signal.
What is the sensing range of the GP2D008A120A sensor?
- The GP2D008A120A sensor has a sensing range of approximately 10cm to 80cm.
Can the GP2D008A120A sensor be used in outdoor environments?
- The GP2D008A120A sensor is primarily designed for indoor use and may not perform optimally in outdoor environments due to ambient light interference.
What are the typical applications of the GP2D008A120A sensor?
- The GP2D008A120A sensor is commonly used in robotics, automation, and proximity detection systems.
Does the GP2D008A120A sensor require calibration?
- Yes, the GP2D008A120A sensor may require calibration to ensure accurate distance measurements.
Is the GP2D008A120A sensor affected by object color or reflectivity?
- Yes, the GP2D008A120A sensor's performance can be influenced by object color and reflectivity, so it's important to consider these factors in its application.
Can the GP2D008A120A sensor output analog or digital signals?
- The GP2D008A120A sensor typically outputs analog voltage proportional to the measured distance.
Are there any limitations to using the GP2D008A120A sensor in crowded environments?
- In crowded environments, the GP2D008A120A sensor may experience interference from multiple reflective surfaces, affecting its accuracy.