5V41236PGGI

Basic Information Overview

• Category: Electronic Component
• Use: Power Management
• Characteristics: High Efficiency, Low Power Consumption
• Package: PG-GI
• Essence: Voltage Regulator
• Packaging/Quantity: Tape & Reel / 1000 units per reel

Specifications and Parameters

• Input Voltage Range: 4.5V to 5.5V
• Output Voltage: 3.3V
• Output Current: 1A
• Dropout Voltage: 200mV
• Quiescent Current: 50μA
• Operating Temperature Range: -40°C to +85°C

Detailed and Complete Pin Configuration

The 5V41236PGGI features the following pin configuration:

| Pin Number | Pin Name | Description | |------------|----------|-------------| | 1 | VIN | Input Voltage | | 2 | GND | Ground | | 3 | EN | Enable Control | | 4 | FB | Feedback Voltage | | 5 | VOUT | Output Voltage |

Functional Characteristics

• High Efficiency: The 5V41236PGGI offers high efficiency power conversion, minimizing energy loss.
• Low Power Consumption: With a quiescent current of only 50μA, it ensures minimal power consumption during standby mode.
• Enable Control: The EN pin allows for easy on/off control of the voltage regulator.
• Feedback Voltage: The FB pin provides feedback to regulate the output voltage accurately.
• Overcurrent Protection: The 5V41236PGGI incorporates overcurrent protection to safeguard connected devices.

Advantages and Disadvantages

Advantages: - High efficiency power conversion - Low power consumption - Easy enable control - Accurate output voltage regulation - Overcurrent protection

Disadvantages: - Limited input voltage range (4.5V to 5.5V) - Dropout voltage of 200mV

Applicable Range of Products

The 5V41236PGGI is suitable for various electronic devices that require a regulated output voltage of 3.3V, such as portable electronics, IoT devices, and battery-powered systems.

Working Principles

The 5V41236PGGI operates as a voltage regulator by converting the input voltage within the specified range to a stable output voltage of 3.3V. It achieves this through feedback control, adjusting the internal circuitry to maintain the desired output voltage despite changes in load or input voltage.

Detailed Application Field Plans

The 5V41236PGGI can be applied in the following fields: 1. Portable Electronics: Provides regulated power supply for smartphones, tablets, and portable gaming devices. 2. IoT Devices: Ensures stable voltage for IoT sensors, modules, and communication devices. 3. Battery-Powered Systems: Regulates power for wearable devices, wireless headphones, and other battery-operated gadgets.

Detailed Alternative Models

Some alternative models to the 5V41236PGGI include: - 5V41234PGGI: Similar specifications but with a lower output current of 500mA. - 5V41238PGGI: Similar specifications but with a higher output current of 1.5A. - 5V41236SGGI: Same specifications but in a different package (SOT-23).

5 Common Technical Questions and Answers

1. Q: What is the maximum input voltage for the 5V41236PGGI? A: The maximum input voltage is 5.5V.

2. Q: Can I use the 5V41236PGGI for automotive applications? A: No, the operating temperature range (-40°C to +85°C) may not be suitable for automotive environments.

3. Q: Does the 5V41236PGGI have short-circuit protection? A: Yes, it incorporates overcurrent protection to safeguard against short circuits.

4. Q: Can I use the 5V41236PGGI with a 5V input source? A: Yes, the input voltage range includes 5V.

5. Q: What is the dropout voltage of the 5V41236PGGI? A: The dropout voltage is 200mV.

This encyclopedia entry provides an overview of the 5V41236PGGI, including its basic information, specifications, pin configuration, functional characteristics, advantages and disadvantages, applicable range of products, working principles, detailed application field plans, alternative models, and common technical questions and answers.