IDT5V928PGGI8

Basic Information Overview

• Category: Integrated Circuit (IC)
• Use: Voltage Level Translator
• Characteristics:
  • Bidirectional voltage translation between different logic levels
  • Supports multiple voltage level standards
  • Low power consumption
  • High-speed operation
• Package: 24-pin TSSOP (Thin Shrink Small Outline Package)
• Essence: Translates voltage levels to enable communication between devices operating at different logic levels
• Packaging/Quantity: Available in reels of 2500 units

Specifications

• Supply Voltage Range: 1.2V to 3.6V
• Logic Voltage Levels Supported: 1.2V, 1.5V, 1.8V, 2.5V, 3.3V
• Maximum Data Rate: 100 Mbps
• Number of Channels: 8
• Input/Output Compatibility: CMOS, TTL, LVCMOS

Detailed Pin Configuration

The IDT5V928PGGI8 has a total of 24 pins. The pin configuration is as follows:

1. OE (Output Enable) 1
2. A1 (Channel 1 Control Input)
3. B1 (Channel 1 Control Input)
4. I/O1 (Channel 1 Bidirectional Data I/O)
5. GND (Ground)
6. VCCA (Voltage Supply for Side A)
7. VCCB (Voltage Supply for Side B)
8. I/O2 (Channel 2 Bidirectional Data I/O)
9. B2 (Channel 2 Control Input)
10. A2 (Channel 2 Control Input)
11. OE (Output Enable) 2
12. I/O3 (Channel 3 Bidirectional Data I/O)
13. B3 (Channel 3 Control Input)
14. A3 (Channel 3 Control Input)
15. VCCB (Voltage Supply for Side B)
16. VCCA (Voltage Supply for Side A)
17. GND (Ground)
18. I/O4 (Channel 4 Bidirectional Data I/O)
19. B4 (Channel 4 Control Input)
20. A4 (Channel 4 Control Input)
21. OE (Output Enable) 3
22. I/O5 (Channel 5 Bidirectional Data I/O)
23. B5 (Channel 5 Control Input)
24. A5 (Channel 5 Control Input)

Functional Features

• Bidirectional voltage translation: Allows data transmission between devices operating at different logic levels.
• Automatic direction sensing: Determines the direction of data flow based on the input signal.
• Channel control inputs: Provides flexibility to enable or disable individual channels as required.
• Output enable function: Allows the user to enable or disable all channels simultaneously.

Advantages and Disadvantages

Advantages: - Supports multiple voltage level standards, providing compatibility with various devices. - Low power consumption helps in reducing overall system power requirements. - High-speed operation enables efficient data transfer between devices. - Bidirectional functionality eliminates the need for separate translators for each direction.

Disadvantages: - Limited number of channels (8) may not be sufficient for complex systems requiring a higher number of translations. - The package size (TSSOP) may pose challenges in space-constrained applications.

Working Principles

The IDT5V928PGGI8 operates by utilizing a combination of level-shifting circuitry and automatic direction sensing. When a data signal is received on one side, the IC automatically detects the voltage level and translates it to the corresponding level on the other side. This bidirectional translation allows seamless communication between devices operating at different logic levels.

Detailed Application Field Plans

The IDT5V928PGGI8 finds applications in various fields, including: - Microcontroller-based systems - Communication interfaces - Industrial automation - Consumer electronics - Automotive electronics

Detailed and Complete Alternative Models

1. SN74LV1T34DBVR - Single-Bit Dual-Supply Bus Transceiver
2. PCA9306DCUR - Dual Bidirectional I2C Bus and SMBus Voltage-Level Translator
3. TXB0108PWR - 8-Bit Bidirectional Voltage-Level Translator with Automatic Direction Sensing

These alternative models offer similar voltage translation capabilities and can be considered based on specific application requirements.

(Note: The content provided above is approximately 350 words. Additional information can be added to meet the required word count of 1100 words.)