ICL3223ECV-T belongs to the category of integrated circuits (ICs).
This product is commonly used for serial communication applications, specifically for converting signals between RS-232 and TTL/CMOS logic levels.
The ICL3223ECV-T is available in a 20-TSSOP package. It is typically sold in reels or tubes containing multiple units.
The essence of ICL3223ECV-T lies in its ability to provide reliable and efficient signal conversion between RS-232 and TTL/CMOS logic levels.
The ICL3223ECV-T has a total of 20 pins. The following table provides a detailed pin configuration:
| Pin No. | Pin Name | Description | |---------|----------|-------------| | 1 | VCC | Positive Power Supply | | 2 | GND | Ground | | 3 | T1OUT | Transmitter 1 Output | | 4 | R1IN | Receiver 1 Input | | 5 | R1OUT | Receiver 1 Output | | 6 | T1IN | Transmitter 1 Input | | 7 | R2OUT | Receiver 2 Output | | 8 | T2IN | Transmitter 2 Input | | 9 | T2OUT | Transmitter 2 Output | | 10 | R2IN | Receiver 2 Input | | 11 | C1- | Capacitor 1 Negative Terminal | | 12 | C1+ | Capacitor 1 Positive Terminal | | 13 | C2+ | Capacitor 2 Positive Terminal | | 14 | C2- | Capacitor 2 Negative Terminal | | 15 | VREF | Reference Voltage | | 16 | NC | No Connection | | 17 | SHDN | Shutdown Control Input | | 18 | EN | Enable Control Input | | 19 | NC | No Connection | | 20 | NC | No Connection |
The ICL3223ECV-T offers the following functional features:
The ICL3223ECV-T operates based on the principles of voltage level conversion and signal conditioning. It receives RS-232 signals and converts them into compatible TTL/CMOS logic levels. This enables seamless communication between devices operating at different voltage levels. The integrated circuit also provides ESD protection to prevent damage from electrostatic discharge events.
The ICL3223ECV-T finds application in various fields, including:
What is the operating voltage range of ICL3223ECV-T?
- The operating voltage range of ICL3223ECV-T is 3V to 5.5V.
What is the maximum data rate supported by ICL3223ECV-T?
- ICL3223ECV-T supports a maximum data rate of 1Mbps.
Can ICL3223ECV-T be used in industrial applications?
- Yes, ICL3223ECV-T is suitable for use in industrial applications due to its robustness and reliability.
What is the typical supply current of ICL3223ECV-T?
- The typical supply current of ICL3223ECV-T is 300μA.
Does ICL3223ECV-T have built-in ESD protection?
- Yes, ICL3223ECV-T features ±15kV ESD protection on the RS-232 interface pins.
Is ICL3223ECV-T compatible with 3.3V microcontrollers?
- Yes, ICL3223ECV-T is fully compatible with 3.3V microcontrollers.
Can ICL3223ECV-T be used in battery-powered applications?
- Yes, ICL3223ECV-T's low power consumption makes it suitable for battery-powered applications.
What is the temperature range for which ICL3223ECV-T is specified?
- ICL3223ECV-T is specified for operation over the temperature range of -40°C to 85°C.
Does ICL3223ECV-T support automatic power-down mode?
- Yes, ICL3223ECV-T features an automatic power-down mode to conserve energy when not in use.
Is ICL3223ECV-T RoHS compliant?
- Yes, ICL3223ECV-T is RoHS compliant, making it environmentally friendly and suitable for modern electronic designs.