Intersil
La imagen puede ser una representación.
Consulte las especificaciones para obtener detalles del producto.
ISL3172EIBZ-T
Ver Detalle Hojas de datos

ISL3172EIBZ-T

Product Overview

Category

ISL3172EIBZ-T belongs to the category of integrated circuits (ICs).

Use

This product is commonly used in communication systems and networks for data transmission.

Characteristics

  • High-speed RS-485/RS-422 transceiver
  • Low power consumption
  • Wide operating voltage range
  • Robust ESD protection
  • Small package size

Package

ISL3172EIBZ-T is available in a small outline integrated circuit (SOIC) package.

Essence

The essence of ISL3172EIBZ-T lies in its ability to provide reliable and efficient data transmission in communication systems.

Packaging/Quantity

This product is typically packaged in reels and each reel contains a specific quantity of ISL3172EIBZ-T units.

Specifications

  • Supply Voltage: 3.0V to 5.5V
  • Data Rate: Up to 40 Mbps
  • Operating Temperature Range: -40°C to +85°C
  • Number of Pins: 8
  • ESD Protection: ±16.5kV HBM, ±8kV IEC61000-4-2 Air Gap Discharge, ±6kV IEC61000-4-2 Contact Discharge

Detailed Pin Configuration

  1. A/B: Differential Receiver Inputs
  2. Y/Z: Differential Driver Outputs
  3. GND: Ground
  4. BIAS: Bias Resistor Connection
  5. VCC: Power Supply
  6. RO: Receiver Output
  7. RE: Receiver Enable
  8. DE: Driver Enable

Functional Features

  • High-speed data transmission
  • Full-duplex or half-duplex operation
  • Enhanced ESD protection
  • Low power consumption
  • Receiver/driver enable control

Advantages and Disadvantages

Advantages

  • High-speed communication capability
  • Wide operating voltage range
  • Robust ESD protection
  • Small package size for space-constrained applications

Disadvantages

  • Limited data rate compared to some other transceiver models
  • Requires external bias resistors for proper operation

Working Principles

ISL3172EIBZ-T operates based on the principles of differential signaling. It uses a balanced transmission line to transmit data, which provides noise immunity and allows for long-distance communication. The transceiver converts the electrical signals into a differential format for transmission and reception.

Detailed Application Field Plans

ISL3172EIBZ-T finds extensive use in various communication systems and networks, including: - Industrial automation - Building automation - HVAC control systems - Security systems - Access control systems - Instrumentation and measurement equipment - Automotive electronics

Detailed and Complete Alternative Models

Some alternative models that can be considered as alternatives to ISL3172EIBZ-T are: - MAX485 - SN75176 - LTC2850 - ADM2483 - SP3485

These models offer similar functionality and can be used as replacements depending on specific requirements.

Word count: 343 words

Enumere 10 preguntas y respuestas comunes relacionadas con la aplicación de ISL3172EIBZ-T en soluciones técnicas

Sure! Here are 10 common questions and answers related to the application of ISL3172EIBZ-T in technical solutions:

  1. Q: What is ISL3172EIBZ-T? A: ISL3172EIBZ-T is a transceiver IC (integrated circuit) that provides robust communication over long distances using the RS-485 protocol.

  2. Q: What is the maximum data rate supported by ISL3172EIBZ-T? A: The maximum data rate supported by ISL3172EIBZ-T is 20 Mbps.

  3. Q: Can ISL3172EIBZ-T be used in half-duplex mode? A: Yes, ISL3172EIBZ-T can be used in both half-duplex and full-duplex modes.

  4. Q: What is the operating voltage range for ISL3172EIBZ-T? A: The operating voltage range for ISL3172EIBZ-T is typically between 3V and 5.5V.

  5. Q: Does ISL3172EIBZ-T support bus-powered applications? A: Yes, ISL3172EIBZ-T supports bus-powered applications as it has low quiescent current consumption.

  6. Q: Can ISL3172EIBZ-T be used in industrial environments? A: Yes, ISL3172EIBZ-T is designed to operate reliably in harsh industrial environments with high noise immunity.

  7. Q: Does ISL3172EIBZ-T have built-in protection features? A: Yes, ISL3172EIBZ-T includes built-in protection features such as thermal shutdown and short-circuit protection.

  8. Q: What is the maximum distance supported by ISL3172EIBZ-T? A: The maximum distance supported by ISL3172EIBZ-T depends on factors like cable quality and data rate, but it can typically reach up to 1200 meters.

  9. Q: Can ISL3172EIBZ-T be used in multi-drop networks? A: Yes, ISL3172EIBZ-T can be used in multi-drop networks where multiple devices are connected to a single RS-485 bus.

  10. Q: Is ISL3172EIBZ-T compatible with other RS-485 transceivers? A: Yes, ISL3172EIBZ-T is compatible with other RS-485 transceivers that adhere to the same protocol and voltage levels.