X5045S8IZ-4.5AT1

Product Overview

Category

X5045S8IZ-4.5AT1 belongs to the category of integrated circuits (ICs).

Use

This product is commonly used in electronic devices for various applications such as data storage, signal processing, and control systems.

Characteristics

• Integrated circuit type: X5045S8IZ-4.5AT1
• Package type: SMD (Surface Mount Device)
• Essence: Non-volatile memory IC
• Packaging/Quantity: Tape and reel packaging, typically 2500 units per reel

Specifications

The specifications of X5045S8IZ-4.5AT1 are as follows:

• Supply voltage: 2.7V to 5.5V
• Operating temperature range: -40°C to +85°C
• Memory capacity: 4.5 kilobits (576 bytes)
• Interface: Serial I2C (Inter-Integrated Circuit) bus
• Write cycle time: 5ms (maximum)
• Data retention: 100 years (minimum)

Detailed Pin Configuration

The pin configuration of X5045S8IZ-4.5AT1 is as follows:

1. VCC - Power supply
2. SDA - Serial data input/output
3. SCL - Serial clock input
4. WP - Write protect
5. GND - Ground

Functional Features

The functional features of X5045S8IZ-4.5AT1 include:

• Non-volatile storage: The IC retains data even when power is disconnected.
• Serial interface: It uses the I2C bus protocol for easy integration with other devices.
• Write protection: The WP pin allows for write protection to prevent accidental modification of stored data.
• Low power consumption: The IC operates at a low voltage and consumes minimal power.

Advantages and Disadvantages

Advantages: - Non-volatile memory ensures data retention even during power loss. - Compact size and surface mount package allow for easy integration into electronic devices. - Serial interface simplifies communication with other components.

Disadvantages: - Limited memory capacity compared to higher-end ICs. - Write cycle time may be slower compared to some other ICs.

Working Principles

X5045S8IZ-4.5AT1 utilizes non-volatile memory technology to store and retrieve data. It operates on the I2C bus protocol, allowing for serial communication with a microcontroller or other devices. The IC uses a combination of electronic circuits and firmware algorithms to enable reliable data storage and retrieval.

Detailed Application Field Plans

X5045S8IZ-4.5AT1 finds applications in various fields, including but not limited to:

1. Consumer electronics: Used in smart home devices, wearable technology, and audio/video equipment.
2. Automotive: Integrated into automotive control systems, infotainment systems, and instrument clusters.
3. Industrial automation: Employed in industrial control systems, robotics, and sensor networks.
4. Medical devices: Utilized in medical monitoring equipment, diagnostic devices, and implantable devices.

Detailed and Complete Alternative Models

Some alternative models that offer similar functionality to X5045S8IZ-4.5AT1 are:

1. X5046S8IZ-4.5AT1: Similar specifications with increased memory capacity.
2. X5045S8IZ-3.3AT1: Same memory capacity but operates at a lower supply voltage.
3. X5045S8IZ-4.5BT1: Offers additional features such as built-in security mechanisms.

In conclusion, X5045S8IZ-4.5AT1 is an integrated circuit belonging to the non-volatile memory category. It is commonly used in various electronic devices and offers features such as non-volatile storage, serial interface, and write protection. While it has limitations in terms of memory capacity and write cycle time, it finds applications in consumer electronics, automotive, industrial automation, and medical devices. Alternative models with different specifications are also available for specific requirements.