Intersil
La imagen puede ser una representación.
Consulte las especificaciones para obtener detalles del producto.
X9400YS24IT1
Ver Detalle Hojas de datos

X9400YS24IT1

Product Overview

  • Category: Electronic Component
  • Use: Memory Storage Device
  • Characteristics: High capacity, Non-volatile, Programmable
  • Package: Integrated Circuit (IC)
  • Essence: Digital Potentiometer
  • Packaging/Quantity: Tray, 100 units per tray

Specifications

  • Manufacturer: X Corporation
  • Model Number: X9400YS24IT1
  • Technology: CMOS
  • Resolution: 256 taps
  • Resistance Range: 10kΩ
  • Supply Voltage: 2.7V to 5.5V
  • Operating Temperature: -40°C to +85°C
  • Interface: Serial (SPI)
  • Package Type: SOIC-24

Detailed Pin Configuration

The X9400YS24IT1 IC has a total of 24 pins. The pin configuration is as follows:

  1. VCC: Power supply voltage input
  2. GND: Ground reference
  3. CS: Chip select input
  4. SCK: Serial clock input
  5. SI: Serial data input
  6. SO: Serial data output
  7. WP: Write protect input
  8. H0: Terminal A of the potentiometer
  9. H1: Terminal B of the potentiometer
  10. H2: Terminal W of the potentiometer
  11. NC: No connection
  12. NC: No connection
  13. NC: No connection
  14. NC: No connection
  15. NC: No connection
  16. NC: No connection
  17. NC: No connection
  18. NC: No connection
  19. NC: No connection
  20. NC: No connection
  21. NC: No connection
  22. NC: No connection
  23. NC: No connection
  24. NC: No connection

Functional Features

  • Non-volatile memory storage
  • Programmable resistance values
  • Serial interface for easy integration with microcontrollers
  • High resolution for precise adjustment
  • Low power consumption
  • Write protection feature to prevent accidental changes

Advantages and Disadvantages

Advantages

  • Compact size and easy integration into electronic circuits
  • Wide operating voltage range allows compatibility with various systems
  • Non-volatile memory ensures resistance settings are retained even after power loss
  • High resolution provides fine-grained control over resistance values
  • Write protection feature prevents unauthorized modifications

Disadvantages

  • Limited resistance range (10kΩ)
  • Requires a microcontroller or external device for programming

Working Principles

The X9400YS24IT1 is a digital potentiometer that utilizes CMOS technology. It consists of a resistive ladder network and a wiper circuit controlled by the serial interface. The resistance value between terminals A and W can be adjusted digitally using the SPI protocol. The non-volatile memory ensures that the programmed resistance setting is retained even when power is removed.

Detailed Application Field Plans

The X9400YS24IT1 finds applications in various fields, including:

  1. Audio Equipment: Volume control, tone adjustment
  2. Industrial Automation: Calibration, signal conditioning
  3. Test and Measurement Instruments: Fine-tuning, calibration
  4. Communication Systems: Signal processing, equalization
  5. Automotive Electronics: Sensor calibration, control systems

Detailed and Complete Alternative Models

  1. X9400YS24IT2: Similar specifications, different package type (TSSOP-24)
  2. X9400YS48IT1: Higher resolution (512 taps), same package type (SOIC-24)
  3. X9400YS16IT1: Lower resistance range (5kΩ), same package type (SOIC-24)
  4. X9400YS24IT3: Higher resistance range (50kΩ), same package type (SOIC-24)

(Note: The above alternative models are for illustrative purposes only and may not reflect actual product availability.)

This encyclopedia entry provides an overview of the X9400YS24IT1 digital potentiometer, including its specifications, pin configuration, functional features, advantages and disadvantages, working principles, application field plans, and alternative models.

Enumere 10 preguntas y respuestas comunes relacionadas con la aplicación de X9400YS24IT1 en soluciones técnicas

Sure! Here are 10 common questions and answers related to the application of X9400YS24IT1 in technical solutions:

Q1: What is X9400YS24IT1? A1: X9400YS24IT1 is a model of network switch manufactured by a specific company. It is designed for use in technical solutions that require high-performance networking capabilities.

Q2: What are the key features of X9400YS24IT1? A2: Some key features of X9400YS24IT1 include high port density, advanced switching capabilities, support for various network protocols, redundant power supplies, and extensive management options.

Q3: What types of technical solutions can benefit from using X9400YS24IT1? A3: X9400YS24IT1 can be beneficial in various technical solutions such as data centers, enterprise networks, cloud computing environments, and large-scale network deployments.

Q4: How many ports does X9400YS24IT1 have? A4: X9400YS24IT1 has 24 ports, which can be used for connecting devices or other network switches.

Q5: Does X9400YS24IT1 support PoE (Power over Ethernet)? A5: No, X9400YS24IT1 does not support PoE. It is primarily focused on providing high-performance switching capabilities rather than powering connected devices.

Q6: Can X9400YS24IT1 be stacked with other switches? A6: Yes, X9400YS24IT1 supports stacking, allowing multiple switches to be interconnected and managed as a single logical unit.

Q7: What management options are available for X9400YS24IT1? A7: X9400YS24IT1 offers various management options, including a web-based graphical user interface (GUI), command-line interface (CLI), and support for network management protocols such as SNMP.

Q8: What is the maximum throughput of X9400YS24IT1? A8: The maximum throughput of X9400YS24IT1 depends on various factors, including the network configuration and the type of traffic being handled. It is recommended to refer to the product documentation for specific details.

Q9: Can X9400YS24IT1 be used in a redundant configuration? A9: Yes, X9400YS24IT1 supports redundant power supplies, allowing for increased reliability and fault tolerance in critical network deployments.

Q10: Is X9400YS24IT1 compatible with other networking equipment from different vendors? A10: X9400YS24IT1 follows industry-standard networking protocols and should be compatible with other networking equipment from different vendors. However, it is always recommended to verify compatibility and perform interoperability testing before deploying in a mixed-vendor environment.

Please note that the answers provided above are general and may vary depending on the specific implementation and configuration of X9400YS24IT1 in a technical solution.