Intersil
La imagen puede ser una representación.
Consulte las especificaciones para obtener detalles del producto.
X9428YV14IZ-2.7
Ver Detalle Hojas de datos

X9428YV14IZ-2.7

Basic Information Overview

  • Category: Integrated Circuit (IC)
  • Use: Digital Potentiometer
  • Characteristics: Non-volatile, 10kΩ resistance, 256 positions, I²C interface
  • Package: SOIC-8
  • Essence: Adjustable resistor for electronic circuits
  • Packaging/Quantity: Tape and reel, 2500 units per reel

Specifications

  • Resistance: 10kΩ
  • Number of Positions: 256
  • Interface: I²C
  • Supply Voltage: 2.7V to 5.5V
  • Temperature Range: -40°C to +85°C
  • Package Type: SOIC-8

Detailed Pin Configuration

  1. VCC: Power supply input
  2. SDA: Serial data line for I²C communication
  3. SCL: Serial clock line for I²C communication
  4. GND: Ground connection
  5. A0: Address selection bit 0
  6. A1: Address selection bit 1
  7. WP: Write protect pin
  8. H: High voltage programming pin

Functional Features

  • Non-volatile memory: Retains settings even when power is disconnected
  • Digital control: Allows precise adjustment of resistance value
  • I²C interface: Enables easy integration with microcontrollers
  • Low power consumption: Suitable for battery-powered devices
  • Wide temperature range: Can operate in extreme environments

Advantages

  • Precise resistance adjustment
  • Non-volatile memory ensures settings are retained
  • Easy integration with microcontrollers
  • Compact package size
  • Wide operating temperature range

Disadvantages

  • Limited number of positions (256)
  • Requires I²C communication protocol support
  • Not suitable for high-power applications

Working Principles

The X9428YV14IZ-2.7 is a digital potentiometer that uses non-volatile memory to store its resistance settings. It operates by adjusting the resistance between its terminals based on digital control signals received through the I²C interface. The potentiometer's resistance can be precisely set to one of the 256 available positions, allowing for fine-grained adjustment in electronic circuits.

Detailed Application Field Plans

The X9428YV14IZ-2.7 is commonly used in various applications, including: 1. Audio equipment: Volume control, tone adjustment 2. Display devices: Brightness control, contrast adjustment 3. Industrial automation: Calibration, signal conditioning 4. Test and measurement instruments: Fine-tuning, calibration 5. Automotive electronics: Climate control, sensor calibration

Detailed and Complete Alternative Models

  1. X9428YV14IZ-1.8: Same specifications, but operates at a supply voltage of 1.8V.
  2. X9428YV14IZ-5.0: Same specifications, but operates at a supply voltage of 5.0V.
  3. X9428YV14IZ-10: Same specifications, but with a higher resistance value of 10kΩ.

(Note: These alternative models are fictional and provided for illustrative purposes only.)

This entry provides an overview of the X9428YV14IZ-2.7 digital potentiometer, including its basic information, specifications, pin configuration, functional features, advantages and disadvantages, working principles, application field plans, and alternative models.

Enumere 10 preguntas y respuestas comunes relacionadas con la aplicación de X9428YV14IZ-2.7 en soluciones técnicas

Sure! Here are 10 common questions and answers related to the application of X9428YV14IZ-2.7 in technical solutions:

  1. Q: What is the X9428YV14IZ-2.7? A: The X9428YV14IZ-2.7 is a specific model or version of a component used in technical solutions.

  2. Q: What is the purpose of X9428YV14IZ-2.7 in technical solutions? A: The X9428YV14IZ-2.7 is typically used as a programmable digital potentiometer or variable resistor in various electronic circuits.

  3. Q: What are the key features of X9428YV14IZ-2.7? A: Some key features of X9428YV14IZ-2.7 include its programmability, non-volatile memory, low power consumption, and wide operating voltage range.

  4. Q: How is X9428YV14IZ-2.7 controlled or programmed? A: X9428YV14IZ-2.7 can be controlled using a microcontroller or other digital interface through its serial communication protocol.

  5. Q: What is the voltage rating of X9428YV14IZ-2.7? A: X9428YV14IZ-2.7 typically operates within a voltage range of 2.7V to 5.5V.

  6. Q: Can X9428YV14IZ-2.7 be used in both analog and digital circuits? A: Yes, X9428YV14IZ-2.7 can be used in both analog and digital circuits as a variable resistor.

  7. Q: Is X9428YV14IZ-2.7 suitable for high-precision applications? A: X9428YV14IZ-2.7 provides good resolution and accuracy, making it suitable for many high-precision applications.

  8. Q: Can X9428YV14IZ-2.7 be used in automotive or industrial applications? A: Yes, X9428YV14IZ-2.7 is designed to withstand harsh environments and can be used in automotive and industrial applications.

  9. Q: Are there any specific precautions to consider when using X9428YV14IZ-2.7? A: It is important to follow the manufacturer's guidelines regarding voltage limits, temperature range, and proper handling to ensure reliable operation.

  10. Q: Where can I find more information about X9428YV14IZ-2.7? A: You can refer to the datasheet or technical documentation provided by the manufacturer for detailed information about X9428YV14IZ-2.7, including its specifications, application notes, and usage guidelines.

Please note that the specific model number mentioned (X9428YV14IZ-2.7) is fictional and used for illustrative purposes. The answers provided are general and may not apply to a real product with that exact model number.