Consulte las especificaciones para obtener detalles del producto.
X9428YV14Z-2.7
Basic Information Overview
Category: Electronic Component
Use: Digital Potentiometer
Characteristics: High precision, low power consumption
Package: SOT-23
Essence: Adjustable resistor
Packaging/Quantity: Tape and Reel / 3000 units per reel
Specifications
- Resistance Range: 0Ω to 10kΩ
- Resolution: 256 steps
- Supply Voltage: 2.7V to 5.5V
- Temperature Range: -40°C to +85°C
- End-to-End Resistance Tolerance: ±20%
- Standby Current: 1μA (typical)
- Operating Current: 3mA (typical)
Detailed Pin Configuration
The X9428YV14Z-2.7 digital potentiometer has a total of 6 pins:
- VCC: Power supply voltage input
- GND: Ground reference
- CS: Chip select input for communication control
- U/D: Up/Down control input for changing resistance value
- INC: Increment control input for increasing resistance value
- W: Wiper terminal for the adjustable resistance output
Functional Features
- Non-volatile memory for storing wiper position
- Low temperature coefficient for accurate performance over a wide temperature range
- Simple interface for easy integration into various electronic systems
- High endurance with 100,000 write cycles
- Power-on recall of wiper position for quick initialization
Advantages and Disadvantages
Advantages: - High precision and resolution for precise adjustment - Low power consumption for energy-efficient applications - Non-volatile memory ensures retention of settings during power loss - Wide operating temperature range allows usage in extreme environments
Disadvantages: - Limited resistance range may not be suitable for all applications - End-to-end resistance tolerance of ±20% may affect accuracy in some cases
Working Principles
The X9428YV14Z-2.7 digital potentiometer operates by utilizing a series of resistive elements and switches controlled by the internal circuitry. The wiper terminal, connected to the output pin, can be adjusted digitally using the control inputs. The non-volatile memory stores the wiper position, allowing it to retain the last set value even after power is removed.
Detailed Application Field Plans
The X9428YV14Z-2.7 digital potentiometer finds applications in various fields, including:
- Audio Systems: Precise volume control in audio amplifiers and mixers.
- Instrumentation: Calibration and adjustment of measurement equipment.
- Industrial Control: Fine-tuning of control parameters in industrial automation systems.
- Communication Devices: Signal level adjustment in transceivers and modems.
- Consumer Electronics: Brightness control in displays and backlighting.
Detailed and Complete Alternative Models
- X9428YV14Z-1.8: Similar specifications with a lower supply voltage range of 1.8V to 5.5V.
- X9428YV14Z-5.0: Similar specifications with a higher supply voltage range of 5.0V to 5.5V.
- X9428YV14Z-10: Similar specifications with a wider resistance range of 0Ω to 100kΩ.
These alternative models provide flexibility in choosing the appropriate digital potentiometer based on specific application requirements.
Word count: 409 words
Enumere 10 preguntas y respuestas comunes relacionadas con la aplicación de X9428YV14Z-2.7 en soluciones técnicas
Sure! Here are 10 common questions and answers related to the application of X9428YV14Z-2.7 in technical solutions:
Q: What is the purpose of X9428YV14Z-2.7 in technical solutions? A: X9428YV14Z-2.7 is a specific component used for data storage and retrieval in various technical solutions.
Q: What are the key features of X9428YV14Z-2.7? A: Some key features of X9428YV14Z-2.7 include non-volatile memory, high-speed operation, low power consumption, and small form factor.
Q: How does X9428YV14Z-2.7 interface with other components in a technical solution? A: X9428YV14Z-2.7 typically interfaces with microcontrollers or other digital devices using standard communication protocols such as I2C or SPI.
Q: Can X9428YV14Z-2.7 be used in both embedded and standalone applications? A: Yes, X9428YV14Z-2.7 can be used in both embedded systems where it is integrated into a larger circuit, as well as standalone applications where it operates independently.
Q: What is the maximum storage capacity of X9428YV14Z-2.7? A: The maximum storage capacity of X9428YV14Z-2.7 is typically specified by the manufacturer and can vary depending on the specific model.
Q: Is X9428YV14Z-2.7 suitable for use in harsh environments? A: X9428YV14Z-2.7 is designed to operate within certain temperature and humidity ranges, so it is important to check the manufacturer's specifications for suitability in harsh environments.
Q: Can X9428YV14Z-2.7 be easily integrated into existing technical solutions? A: Yes, X9428YV14Z-2.7 is designed to be compatible with standard communication protocols and can be easily integrated into existing systems with proper hardware and software support.
Q: Are there any specific programming requirements for X9428YV14Z-2.7? A: X9428YV14Z-2.7 typically requires specific commands or instructions to read from or write to its memory, which can be implemented through software programming.
Q: What are some typical applications of X9428YV14Z-2.7 in technical solutions? A: X9428YV14Z-2.7 can be used in various applications such as data logging, configuration storage, security key storage, calibration data storage, and more.
Q: Where can I find additional technical documentation and support for X9428YV14Z-2.7? A: Additional technical documentation, datasheets, and support for X9428YV14Z-2.7 can usually be found on the manufacturer's website or by contacting their customer support team.
Please note that the specific details and answers may vary depending on the actual product and manufacturer.