La imagen puede ser una representación.
Consulte las especificaciones para obtener detalles del producto.
IXFN400N15X3

IXFN400N15X3

Product Overview

Category: Power MOSFET
Use: High power switching applications
Characteristics: High voltage, high current capability
Package: TO-268
Essence: Power semiconductor device
Packaging/Quantity: Tape and reel, 500 units per reel

Specifications

  • Voltage Rating: 1500V
  • Current Rating: 400A
  • RDS(on): 1.15 mΩ
  • Gate Threshold Voltage: 4V
  • Operating Temperature Range: -55°C to 175°C

Detailed Pin Configuration

The IXFN400N15X3 features a TO-268 package with the following pin configuration: 1. Gate (G) 2. Drain (D) 3. Source (S)

Functional Features

  • Low on-state resistance
  • Fast switching speed
  • High input impedance
  • Avalanche energy rated
  • Low gate charge

Advantages and Disadvantages

Advantages: - High voltage and current capability - Low on-state resistance - Fast switching speed

Disadvantages: - Higher cost compared to lower power MOSFETs - Requires careful handling due to high voltage ratings

Working Principles

The IXFN400N15X3 operates based on the principles of field-effect transistors, utilizing the control of an electric field to modulate the conductivity of the device.

Detailed Application Field Plans

This MOSFET is suitable for a wide range of high-power applications including: - Motor drives - Power supplies - Renewable energy systems - Electric vehicles - Industrial equipment

Detailed and Complete Alternative Models

  1. IXFN450N10T
    • Voltage Rating: 1000V
    • Current Rating: 450A
    • RDS(on): 0.95 mΩ
  2. IXFN360N07T
    • Voltage Rating: 700V
    • Current Rating: 360A
    • RDS(on): 1.5 mΩ
  3. IXFN300N04T
    • Voltage Rating: 400V
    • Current Rating: 300A
    • RDS(on): 2.8 mΩ

Note: The alternative models listed above are indicative and may vary based on specific requirements.

This completes the English editing encyclopedia entry structure for IXFN400N15X3.

Enumere 10 preguntas y respuestas comunes relacionadas con la aplicación de IXFN400N15X3 en soluciones técnicas

  1. What is the maximum voltage rating of IXFN400N15X3?

    • The maximum voltage rating of IXFN400N15X3 is 1500V.
  2. What is the maximum current rating of IXFN400N15X3?

    • The maximum current rating of IXFN400N15X3 is 400A.
  3. What type of package does IXFN400N15X3 come in?

    • IXFN400N15X3 comes in a TO-264 package.
  4. What are the typical applications for IXFN400N15X3?

    • IXFN400N15X3 is commonly used in applications such as motor drives, inverters, and power supplies.
  5. What is the on-state resistance of IXFN400N15X3?

    • The on-state resistance of IXFN400N15X3 is typically around 0.15 ohms.
  6. Does IXFN400N15X3 require a heat sink for operation?

    • Yes, IXFN400N15X3 typically requires a heat sink for efficient operation due to its high power handling capabilities.
  7. What is the maximum junction temperature for IXFN400N15X3?

    • The maximum junction temperature for IXFN400N15X3 is 150°C.
  8. Is IXFN400N15X3 suitable for high-frequency switching applications?

    • Yes, IXFN400N15X3 is suitable for high-frequency switching applications due to its fast switching characteristics.
  9. Can IXFN400N15X3 be used in parallel to handle higher currents?

    • Yes, IXFN400N15X3 can be used in parallel to handle higher currents effectively.
  10. What are the key advantages of using IXFN400N15X3 in technical solutions?

    • The key advantages of using IXFN400N15X3 include its high voltage and current ratings, low on-state resistance, and suitability for various power electronics applications.