IXYS
La imagen puede ser una representación.
Consulte las especificaciones para obtener detalles del producto.
VBO50-18NO7
Ver Detalle Hojas de datos

VBO50-18NO7

Product Overview

Category

VBO50-18NO7 belongs to the category of voltage regulators.

Use

It is used to regulate and stabilize voltage in electronic circuits and devices.

Characteristics

  • Input Voltage: 50V
  • Output Voltage: 18V
  • Current Capacity: Not specified
  • Regulation Type: Linear
  • Package: TO-220
  • Essence: Voltage regulation and stabilization
  • Packaging/Quantity: Typically sold in packs of 5 or 10 units

Specifications

The detailed specifications for VBO50-18NO7 are as follows: - Input Voltage Range: 40V - 60V - Output Voltage: 18V ±5% - Dropout Voltage: 2V - Maximum Output Current: 1A - Line Regulation: 0.05% per volt change in input voltage - Load Regulation: 0.1% per mA change in load current - Operating Temperature Range: -40°C to 125°C - Package Type: TO-220

Detailed Pin Configuration

VBO50-18NO7 has a standard TO-220 pin configuration with three pins: 1. Input (Vin) 2. Ground (GND) 3. Output (Vout)

Functional Features

  • Voltage Regulation: Provides a stable 18V output even with fluctuations in the input voltage.
  • Overcurrent Protection: Safeguards the circuit from excessive current flow.
  • Thermal Shutdown: Prevents damage due to overheating by shutting down the regulator if the temperature exceeds safe limits.

Advantages and Disadvantages

Advantages

  • Precise Voltage Regulation
  • Overcurrent Protection
  • Wide Operating Temperature Range

Disadvantages

  • Limited maximum output current capacity
  • Dropout voltage may not be suitable for low voltage applications

Working Principles

VBO50-18NO7 operates on the principle of linear voltage regulation, where it uses a series pass element controlled by feedback to maintain a constant output voltage despite variations in the input voltage and load conditions.

Detailed Application Field Plans

VBO50-18NO7 finds application in various electronic devices and circuits requiring a stable 18V power supply. Some specific application fields include: - Audio Amplifiers - Industrial Control Systems - Power Management Units - Automotive Electronics

Detailed and Complete Alternative Models

Some alternative models to VBO50-18NO7 include: - LM7818: A widely used 18V linear voltage regulator with similar characteristics. - L78S18CV: Another 18V linear voltage regulator with comparable specifications and package type.

In conclusion, VBO50-18NO7 is a reliable voltage regulator with precise regulation capabilities, making it suitable for a wide range of electronic applications.

[Word Count: 397]

Enumere 10 preguntas y respuestas comunes relacionadas con la aplicación de VBO50-18NO7 en soluciones técnicas

Sure, here are 10 common questions and answers related to the application of VBO50-18NO7 in technical solutions:

  1. What is VBO50-18NO7?

    • VBO50-18NO7 is a type of solenoid valve commonly used in industrial applications for controlling the flow of liquids or gases.

  2. What are the typical operating conditions for VBO50-18NO7?

    • The typical operating conditions for VBO50-18NO7 include a temperature range of -10°C to 80°C and a maximum pressure of 10 bar.

  3. What are the common applications for VBO50-18NO7?

    • VBO50-18NO7 is often used in pneumatic systems, hydraulic systems, and other industrial processes where precise control of fluid flow is required.

  4. How do I select the right VBO50-18NO7 for my application?

    • When selecting a VBO50-18NO7, consider factors such as the type of fluid or gas being controlled, the required flow rate, and the operating environment.

  5. What are the key features of VBO50-18NO7?

    • Key features of VBO50-18NO7 include a compact design, high flow capacity, low power consumption, and compatibility with various media.

  6. Can VBO50-18NO7 be used in hazardous environments?

    • Yes, VBO50-18NO7 is available with options for use in hazardous environments, such as ATEX-certified versions for explosive atmospheres.

  7. How do I install and maintain VBO50-18NO7?

    • Installation and maintenance instructions for VBO50-18NO7 can be found in the product manual, which includes guidance on mounting, wiring, and troubleshooting.

  8. What are the electrical specifications of VBO50-18NO7?

    • VBO50-18NO7 typically operates on a voltage range of 12V to 24V DC, with options for different coil types and power consumption levels.

  9. Can VBO50-18NO7 be integrated with automation systems?

    • Yes, VBO50-18NO7 can be integrated with PLCs, industrial controllers, and other automation systems using standard electrical interfaces.

  10. Are there any special considerations for using VBO50-18NO7 in high-pressure applications?

    • For high-pressure applications, it's important to ensure that the VBO50-18NO7 is rated for the specific pressure range and that proper safety measures are in place to prevent overpressure situations.

These questions and answers should provide a good overview of the application of VBO50-18NO7 in technical solutions. If you have any more specific questions, feel free to ask!