Linear Technology/QD Devices
La imagen puede ser una representación.
Consulte las especificaciones para obtener detalles del producto.
LT1081CN#PBF
Ver Detalle Hojas de datos

LT1081CN#PBF

Product Overview

Category

The LT1081CN#PBF belongs to the category of integrated circuits (ICs) and specifically falls under the analog switches category.

Use

This product is commonly used in electronic circuits for signal switching applications, where it serves as a high-performance alternative to mechanical switches.

Characteristics

  • High precision and low distortion
  • Wide operating voltage range
  • Low power consumption
  • Fast switching speed

Package

The LT1081CN#PBF is available in a 16-pin PDIP (Plastic Dual In-line Package) format, which facilitates easy integration into circuit designs.

Essence

The essence of LT1081CN#PBF lies in its ability to provide reliable and precise signal switching capabilities in various electronic applications.

Packaging/Quantity

The product is typically packaged in reels containing a specific quantity, such as 250 or 1000 units per reel, depending on the manufacturer's specifications.

Specifications

  • Operating Voltage Range: ±5V to ±22V
  • On-Resistance: 150Ω maximum
  • Off-Isolation: -90dB at 1MHz
  • Switching Speed: 200ns maximum

Detailed Pin Configuration

The LT1081CN#PBF features a 16-pin PDIP package with the following pin configuration: 1. IN1 2. GND 3. IN2 4. COM 5. NO1 6. NC1 7. V+ 8. V- 9. NO2 10. NC2 11. IN4 12. IN3 13. GND 14. IN5 15. NO3 16. NC3

Functional Features

  • Multiple input channels for versatile signal routing
  • Low on-resistance for minimal signal attenuation
  • High off-isolation for reduced crosstalk
  • Wide operating voltage range for compatibility with various systems

Advantages and Disadvantages

Advantages

  • Precise signal switching
  • Low distortion
  • Versatile input channels
  • Wide operating voltage range

Disadvantages

  • Relatively higher cost compared to mechanical switches
  • Sensitivity to electrostatic discharge (ESD)

Working Principles

The LT1081CN#PBF operates based on solid-state switching principles, utilizing MOSFET-based technology to achieve fast and accurate signal routing. When a control voltage is applied to the input pins, the internal switches change state, allowing the signal to pass through the selected channel.

Detailed Application Field Plans

The LT1081CN#PBF finds extensive use in various electronic applications, including: - Audio signal routing in professional audio equipment - Precision instrumentation for test and measurement systems - Communication systems for signal switching and routing

Detailed and Complete Alternative Models

  • ADG1606: Analog Devices, Inc.
  • MAX14752: Maxim Integrated
  • DG408DJZ: Vishay Intertechnology

In conclusion, the LT1081CN#PBF offers high-performance signal switching capabilities with precise control and versatility, making it an ideal choice for applications requiring reliable and accurate signal routing.

Word Count: 443

Enumere 10 preguntas y respuestas comunes relacionadas con la aplicación de LT1081CN#PBF en soluciones técnicas

  1. What is the LT1081CN#PBF?

    • The LT1081CN#PBF is a high performance operational amplifier designed for use in precision and high-speed applications.

  2. What are the key features of the LT1081CN#PBF?

    • The LT1081CN#PBF features low input offset voltage, low input bias current, high gain bandwidth product, and low input noise, making it suitable for a wide range of precision applications.

  3. What are the typical applications of the LT1081CN#PBF?

    • Typical applications include active filters, instrumentation amplifiers, precision integrators, and data acquisition systems.

  4. What is the supply voltage range for the LT1081CN#PBF?

    • The LT1081CN#PBF operates from a single supply voltage range of 5V to 36V or a dual supply voltage range of ±2.5V to ±18V.

  5. What is the input offset voltage of the LT1081CN#PBF?

    • The input offset voltage is typically 150µV, which ensures accurate signal processing in precision applications.

  6. Does the LT1081CN#PBF have thermal shutdown protection?

    • Yes, the LT1081CN#PBF is equipped with thermal shutdown protection to prevent damage from excessive heat.

  7. What is the maximum output current of the LT1081CN#PBF?

    • The LT1081CN#PBF can deliver up to ±30mA of output current, making it suitable for driving a wide range of loads.

  8. Is the LT1081CN#PBF available in a surface-mount package?

    • Yes, the LT1081CN#PBF is available in a 16-lead narrow plastic DIP (PDIP) package, making it suitable for both through-hole and surface-mount applications.

  9. What is the operating temperature range of the LT1081CN#PBF?

    • The LT1081CN#PBF is designed to operate over a temperature range of -40°C to 85°C, ensuring reliable performance in various environmental conditions.

  10. Are there any application notes or reference designs available for the LT1081CN#PBF?

    • Yes, Linear Technology (now part of Analog Devices) provides comprehensive application notes and reference designs for the LT1081CN#PBF, offering guidance on its optimal use in technical solutions.