LT1634BCMS8-2.5#PBF

Product Overview

Category

The LT1634BCMS8-2.5#PBF belongs to the category of integrated circuits (ICs).

Use

This product is commonly used in electronic devices for voltage reference applications.

Characteristics

• Voltage Reference: The LT1634BCMS8-2.5#PBF provides a stable and accurate voltage reference of 2.5 volts.
• Low Drift: It exhibits low temperature drift, ensuring consistent performance over a wide range of operating conditions.
• High Accuracy: The LT1634BCMS8-2.5#PBF offers high precision with low initial tolerance.
• Low Noise: This IC minimizes output noise, making it suitable for sensitive applications.
• Low Power Consumption: It operates with low power consumption, enhancing energy efficiency.
• Small Package: The LT1634BCMS8-2.5#PBF comes in a compact MSOP-8 package, allowing for easy integration into various circuit designs.

Packaging/Quantity

The LT1634BCMS8-2.5#PBF is typically packaged in reels or tubes, with a quantity of 250 units per reel/tube.

Specifications

• Output Voltage: 2.5 volts
• Initial Tolerance: ±0.05%
• Temperature Coefficient: 10 ppm/°C
• Supply Voltage Range: 2.7V to 18V
• Operating Temperature Range: -40°C to 125°C
• Output Current: 10 mA

Detailed Pin Configuration

The LT1634BCMS8-2.5#PBF has eight pins arranged as follows:

```

---

| | --| VOUT | --| GND | --| NC | --| NC | --| NC | --| NC | --| VIN | |___________| ```

Functional Features

• High Precision: The LT1634BCMS8-2.5#PBF provides a stable and accurate voltage reference, ensuring precise measurements in electronic circuits.
• Temperature Stability: With its low temperature coefficient, this IC maintains consistent performance over a wide temperature range.
• Low Power Consumption: The LT1634BCMS8-2.5#PBF operates with low power consumption, making it suitable for battery-powered devices.
• Noise Reduction: It minimizes output noise, enabling reliable operation in noise-sensitive applications.
• Easy Integration: The small package size and standard pin configuration facilitate easy integration into various circuit designs.

Advantages and Disadvantages

Advantages

• High precision and accuracy
• Low temperature drift
• Low power consumption
• Small package size for easy integration
• Reduced output noise

Disadvantages

• Limited output current capacity (10 mA)
• Restricted operating temperature range (-40°C to 125°C)

Working Principles

The LT1634BCMS8-2.5#PBF utilizes bandgap voltage reference technology to generate a stable and accurate 2.5-volt output. It employs a combination of resistors, diodes, and amplifiers to achieve the desired voltage reference characteristics. The internal circuitry compensates for temperature variations, ensuring minimal drift and high precision.

Detailed Application Field Plans

The LT1634BCMS8-2.5#PBF finds application in various fields, including:

1. Precision Instrumentation: It is used in precision measurement equipment, such as multimeters and oscilloscopes, to provide a stable voltage reference for accurate readings.
2. Analog-to-Digital Converters (ADCs): This IC is employed in ADCs to establish a precise reference voltage, enabling accurate conversion of analog signals to digital data.
3. Power Management: It is utilized in power management circuits to regulate voltage levels and ensure stable operation of electronic devices.
4. Sensor Calibration: The LT1634BCMS8-2.5#PBF is used in sensor calibration applications, where a stable reference voltage is required for accurate sensor measurements.

Detailed and Complete Alternative Models

1. LT1634AIS8-2.5#PBF: Similar to the LT1634BCMS8-2.5#PBF, this model offers a 2.5-volt voltage reference with comparable specifications. It comes in an SOIC-8 package.
2. LT1634BIS8-2.5#PBF: This alternative model provides the same 2.5-volt voltage reference but comes in an SOIC-8 package. It shares similar characteristics and specifications as the LT1634BCMS8-2.5#PBF.

These alternative models can be considered based on specific application requirements and package preferences.

Word count: 529 words