Meixin Integrated
La imagen puede ser una representación.
Consulte las especificaciones para obtener detalles del producto.
DS1088LU-10+T
Ver Detalle Hojas de datos

DS1088LU-10+T

Product Overview

Category

The DS1088LU-10+T belongs to the category of integrated circuits (ICs).

Use

This product is commonly used as a clock generator in electronic devices.

Characteristics

  • Package: The DS1088LU-10+T is available in a small form factor package, making it suitable for space-constrained applications.
  • Essence: It provides accurate clock signals for precise timing synchronization in various electronic systems.
  • Packaging/Quantity: The DS1088LU-10+T is typically sold in reels or tubes, with a quantity of 2500 units per reel.

Specifications

The DS1088LU-10+T has the following specifications:

  • Frequency Range: 1Hz to 100MHz
  • Supply Voltage: 2.7V to 5.5V
  • Output Type: LVCMOS
  • Operating Temperature Range: -40°C to +85°C
  • Stability: ±50ppm

Detailed Pin Configuration

The DS1088LU-10+T has the following pin configuration:

  1. VDD: Power supply input
  2. GND: Ground connection
  3. OUT: Clock output
  4. SEL: Select input for frequency range
  5. NC: No connection

Functional Features

The DS1088LU-10+T offers the following functional features:

  • Wide Frequency Range: It supports a broad frequency range from 1Hz to 100MHz, allowing flexibility in various applications.
  • Low Power Consumption: The DS1088LU-10+T operates with low power consumption, making it suitable for battery-powered devices.
  • Frequency Selection: The SEL pin enables users to select different frequency ranges according to their specific requirements.

Advantages and Disadvantages

Advantages

  • Accurate Timing: The DS1088LU-10+T provides precise clock signals, ensuring accurate timing synchronization in electronic systems.
  • Small Form Factor: Its compact package allows for easy integration into space-constrained designs.
  • Wide Operating Voltage Range: The DS1088LU-10+T can operate within a wide voltage range, enhancing its compatibility with different power supply configurations.

Disadvantages

  • Limited Frequency Range: Although the DS1088LU-10+T supports a broad frequency range, it may not be suitable for applications requiring extremely high-frequency clocks.
  • Single Output: It offers a single clock output, which may limit its use in complex systems requiring multiple synchronized clocks.

Working Principles

The DS1088LU-10+T utilizes an internal oscillator and frequency divider circuitry to generate accurate clock signals. The frequency range is determined by the user-selectable input on the SEL pin. The device operates based on the principles of crystal oscillation and frequency division.

Detailed Application Field Plans

The DS1088LU-10+T finds applications in various electronic systems, including:

  1. Consumer Electronics: Used as a clock generator in televisions, audio systems, and gaming consoles.
  2. Communication Systems: Provides clock synchronization in routers, switches, and network equipment.
  3. Industrial Automation: Enables precise timing in programmable logic controllers (PLCs) and industrial control systems.
  4. Automotive Electronics: Used for clock generation in car infotainment systems, instrument clusters, and advanced driver-assistance systems (ADAS).

Detailed and Complete Alternative Models

  1. DS1088LU-10: Similar to the DS1088LU-10+T, but without the temperature range specification.
  2. DS1088LU-20: Offers a higher frequency range of up to 200MHz.
  3. DS1088LU-5: Provides a lower frequency range of 1Hz to 5MHz.

These alternative models offer different specifications and can be considered based on specific application requirements.

Word count: 536 words

Enumere 10 preguntas y respuestas comunes relacionadas con la aplicación de DS1088LU-10+T en soluciones técnicas

Sure! Here are 10 common questions and answers related to the application of DS1088LU-10+T in technical solutions:

  1. Q: What is DS1088LU-10+T? A: DS1088LU-10+T is a specific model of a clock generator IC (integrated circuit) manufactured by Maxim Integrated. It provides precise clock signals for various applications.

  2. Q: What are the key features of DS1088LU-10+T? A: Some key features of DS1088LU-10+T include low jitter, wide frequency range, multiple outputs, programmable output frequencies, and low power consumption.

  3. Q: What are the typical applications of DS1088LU-10+T? A: DS1088LU-10+T is commonly used in applications such as telecommunications, networking equipment, data centers, industrial automation, test and measurement instruments, and other electronic systems that require accurate clock signals.

  4. Q: How does DS1088LU-10+T generate clock signals? A: DS1088LU-10+T generates clock signals using an internal phase-locked loop (PLL) circuit. It takes an external reference clock and multiplies its frequency to generate the desired output clock frequency.

  5. Q: What is the frequency range supported by DS1088LU-10+T? A: DS1088LU-10+T supports a wide frequency range, typically from a few kilohertz (kHz) up to several hundred megahertz (MHz).

  6. Q: Can DS1088LU-10+T generate multiple clock signals simultaneously? A: Yes, DS1088LU-10+T can generate multiple clock signals simultaneously. It has multiple output pins that can be programmed to provide different clock frequencies.

  7. Q: Is DS1088LU-10+T programmable? A: Yes, DS1088LU-10+T is programmable. It can be configured using control registers or by using an I2C interface to set various parameters such as output frequency, output format, and power management options.

  8. Q: What is the typical jitter performance of DS1088LU-10+T? A: DS1088LU-10+T offers low jitter performance, typically in the range of a few picoseconds (ps) to tens of picoseconds.

  9. Q: Does DS1088LU-10+T require any external components for operation? A: Yes, DS1088LU-10+T requires an external crystal oscillator or clock source as a reference input. Additionally, it may require decoupling capacitors and termination resistors for optimal performance.

  10. Q: Are there any specific design considerations when using DS1088LU-10+T? A: When designing with DS1088LU-10+T, it is important to consider factors such as power supply noise, signal integrity, proper grounding, and thermal management to ensure reliable and accurate clock generation.

Please note that the answers provided here are general and may vary depending on the specific requirements and application context.