Consulte las especificaciones para obtener detalles del producto.
MAX14803CXB+T
Product Overview
- Category: Integrated Circuit
- Use: Industrial Communication and Control Systems
- Characteristics: High-Speed, Low-Power, Robust Interface
- Package: 48-TQFN (7mm x 7mm)
- Essence: Transceiver IC for RS-485/RS-422 Applications
- Packaging/Quantity: Tape & Reel, 2500 units per reel
Specifications
- Supply Voltage: 3.3V
- Data Rate: Up to 25Mbps
- Operating Temperature Range: -40°C to +85°C
- Number of Channels: 1
- Interface Standards: RS-485, RS-422
- Protection Features: Short-Circuit, Overvoltage, Undervoltage
- ESD Protection: ±15kV HBM, ±8kV IEC61000-4-2 Air Gap Discharge, ±6kV IEC61000-4-2 Contact Discharge
Pin Configuration
The MAX14803CXB+T has a 48-pin Thin Quad Flat No-Lead (TQFN) package. The pin configuration is as follows:
- DE (Driver Output Enable)
- A (Non-Inverting Driver Input)
- B (Inverting Driver Input)
- GND (Ground)
- VCC (Power Supply)
- RE (Receiver Output Enable)
- Y (Receiver Output)
- Z (Receiver Output)
- GND (Ground)
- VCC (Power Supply)
- RO (Receiver Output)
- DI (Driver Input)
- GND (Ground)
- VCC (Power Supply)
- NC (No Connection)
- NC (No Connection)
- NC (No Connection)
- NC (No Connection)
- NC (No Connection)
- NC (No Connection)
- NC (No Connection)
- NC (No Connection)
- NC (No Connection)
- NC (No Connection)
- NC (No Connection)
- NC (No Connection)
- NC (No Connection)
- NC (No Connection)
- NC (No Connection)
- NC (No Connection)
- NC (No Connection)
- NC (No Connection)
- NC (No Connection)
- NC (No Connection)
- NC (No Connection)
- NC (No Connection)
- NC (No Connection)
- NC (No Connection)
- NC (No Connection)
- NC (No Connection)
- NC (No Connection)
- NC (No Connection)
- NC (No Connection)
- NC (No Connection)
- NC (No Connection)
- NC (No Connection)
- NC (No Connection)
- NC (No Connection)
Functional Features
- Full-Duplex RS-485/RS-422 Transceiver
- Integrated Protection Features for Robust Communication
- Low Power Consumption in Shutdown Mode
- High-Speed Data Transmission up to 25Mbps
- Wide Operating Temperature Range for Industrial Applications
Advantages and Disadvantages
Advantages
- Robust Interface for Industrial Communication Systems
- High-Speed Data Transmission
- Integrated Protection Features for Enhanced Reliability
- Low Power Consumption in Shutdown Mode
- Wide Operating Temperature Range
Disadvantages
- Limited to Single Channel Communication
- Requires External Components for Complete Functionality
Working Principles
The MAX14803CXB+T is a full-duplex transceiver IC designed for RS-485 and RS-422 communication applications. It provides a robust interface for industrial communication and control systems. The IC integrates protection features such as short-circuit, overvoltage, and undervoltage protection to ensure reliable data transmission in harsh environments. It operates at high speeds of up to 25Mbps and has low power consumption in shutdown mode, making it suitable for power-sensitive applications. The transceiver is designed to operate within a wide temperature range, enabling its use in various industrial settings.
Detailed Application Field Plans
The MAX14803CXB+T is commonly used in the following application fields:
- Industrial Automation Systems
- Building Automation Systems
- Process Control Systems
- Robotics and Motion Control Systems
- Energy Management Systems
- HVAC (Heating, Ventilation, and Air Conditioning) Systems
- Access Control Systems
- Security Systems
- Transportation Systems
- Communication Infrastructure
Detailed and Complete Alternative Models
- MAX14830: Quad RS-485/RS-422 Transceiver with Integrated Transformer Driver
- MAX13487E: Full-Duplex RS-485/RS-422 Transceiver with ±80V Fault
Enumere 10 preguntas y respuestas comunes relacionadas con la aplicación de MAX14803CXB+T en soluciones técnicas
Sure! Here are 10 common questions and answers related to the application of MAX14803CXB+T in technical solutions:
Q: What is MAX14803CXB+T? A: MAX14803CXB+T is a highly integrated, dual-channel, IO-Link master transceiver that simplifies the implementation of IO-Link communication in industrial automation systems.
Q: What is IO-Link? A: IO-Link is a standardized serial communication protocol used for connecting sensors and actuators to industrial control systems, providing enhanced diagnostics and configuration capabilities.
Q: What are the key features of MAX14803CXB+T? A: MAX14803CXB+T features two IO-Link master channels, integrated protection features, high-speed SPI interface, and support for both 3.3V and 5V supply voltages.
Q: How can I interface with MAX14803CXB+T? A: MAX14803CXB+T can be easily interfaced with a microcontroller or PLC using its high-speed SPI interface.
Q: Can MAX14803CXB+T operate with different supply voltages? A: Yes, MAX14803CXB+T supports both 3.3V and 5V supply voltages, making it compatible with a wide range of systems.
Q: What are the protection features of MAX14803CXB+T? A: MAX14803CXB+T provides built-in protection against overvoltage, reverse polarity, and short-circuit conditions, ensuring robust operation in industrial environments.
Q: Can I use MAX14803CXB+T in harsh industrial environments? A: Yes, MAX14803CXB+T is designed to operate reliably in harsh industrial environments, with a wide temperature range and ESD protection.
Q: How many IO-Link devices can be connected to MAX14803CXB+T? A: Each channel of MAX14803CXB+T can support up to 4 IO-Link devices, allowing a total of 8 devices to be connected.
Q: Does MAX14803CXB+T support diagnostics and parameterization of IO-Link devices? A: Yes, MAX14803CXB+T provides advanced diagnostics and parameterization capabilities for connected IO-Link devices, enabling efficient system monitoring and configuration.
Q: Are evaluation kits available for MAX14803CXB+T? A: Yes, Maxim Integrated offers evaluation kits for MAX14803CXB+T, which include the necessary hardware and software tools to quickly evaluate and develop applications using the transceiver.
Please note that these answers are general and may vary depending on specific application requirements.