MAX16924GGM/VY+T

Product Overview

• Category: Integrated Circuit (IC)
• Use: Power Management
• Characteristics: High Efficiency, Low Quiescent Current
• Package: 16-pin TQFN
• Essence: Voltage Regulator
• Packaging/Quantity: Tape and Reel, 2500 units per reel

Specifications

• Input Voltage Range: 4.5V to 60V
• Output Voltage Range: 1.2V to 57V
• Maximum Output Current: 500mA
• Quiescent Current: 17µA
• Switching Frequency: 2.2MHz
• Operating Temperature Range: -40°C to +125°C

Pin Configuration

The MAX16924GGM/VY+T has a 16-pin TQFN package with the following pin configuration:

1. VIN: Input Voltage
2. EN: Enable Pin
3. FB: Feedback Pin
4. GND: Ground
5. SW: Switch Node
6. PGND: Power Ground
7. VOUT: Output Voltage
8. SS/TRK: Soft-Start/Tracking
9. NC: No Connection
10. NC: No Connection
11. NC: No Connection
12. NC: No Connection
13. NC: No Connection
14. NC: No Connection
15. NC: No Connection
16. NC: No Connection

Functional Features

• Wide input voltage range allows for versatile applications.
• High efficiency ensures minimal power loss.
• Low quiescent current enables energy-saving operation.
• Integrated soft-start and tracking functionality for smooth startup.
• Overcurrent and overtemperature protection for enhanced reliability.

Advantages and Disadvantages

Advantages: - Wide input voltage range provides flexibility in various applications. - High efficiency reduces power consumption and heat dissipation. - Low quiescent current prolongs battery life in portable devices. - Integrated protection features enhance system reliability.

Disadvantages: - Limited maximum output current may not be suitable for high-power applications. - 16-pin package may require additional board space compared to smaller packages.

Working Principles

The MAX16924GGM/VY+T is a voltage regulator IC that converts an input voltage within the range of 4.5V to 60V to a regulated output voltage between 1.2V and 57V. It operates by utilizing a switching regulator topology, which allows for high efficiency power conversion. The integrated control circuitry ensures stable output voltage despite variations in input voltage and load conditions. The device also incorporates various protection mechanisms to safeguard against overcurrent and overtemperature conditions.

Detailed Application Field Plans

The MAX16924GGM/VY+T finds applications in various fields, including but not limited to:

1. Automotive: Power management for automotive electronics, such as infotainment systems, lighting modules, and sensors.
2. Industrial: Voltage regulation for industrial automation equipment, motor control systems, and instrumentation devices.
3. Consumer Electronics: Power supply for portable devices, home appliances, and audio/video equipment.
4. Telecommunications: Voltage regulation for telecom infrastructure, base stations, and network equipment.
5. Renewable Energy: Power management for solar panels, wind turbines, and energy storage systems.

Detailed and Complete Alternative Models

1. MAX16925GGM/VY+T: Similar specifications and pin configuration, but with a higher maximum output current of 1A.
2. MAX16926GGM/VY+T: Similar specifications and pin configuration, but with a lower quiescent current of 10µA.
3. MAX16927GGM/VY+T: Similar specifications and pin configuration, but with a wider input voltage range of 4.5V to 72V.

(Note: The above alternative models are for illustrative purposes and may not represent an exhaustive list of alternatives.)

This concludes the encyclopedia entry for MAX16924GGM/VY+T, providing comprehensive information about its product category, use, characteristics, specifications, pin configuration, functional features, advantages and disadvantages, working principles, application field plans, and alternative models.