Microchip Technology
La imagen puede ser una representación.
Consulte las especificaciones para obtener detalles del producto.
KSZ9031MNXIC
Ver Detalle Hojas de datos

KSZ9031MNXIC

Product Overview

Category

The KSZ9031MNXIC belongs to the category of Ethernet Physical Layer Transceiver (PHY) integrated circuits.

Use

It is primarily used for providing physical layer connectivity in Ethernet applications, enabling the transmission and reception of data over Ethernet networks.

Characteristics

  • The KSZ9031MNXIC is a highly integrated and compact PHY IC.
  • It supports various Ethernet standards, including 10BASE-T, 100BASE-TX, and 1000BASE-T.
  • It offers advanced features such as auto-negotiation, auto-MDIX, and energy-efficient Ethernet.
  • The IC operates at low power consumption levels, making it suitable for power-sensitive applications.
  • It provides robust performance and reliable data transmission.

Package

The KSZ9031MNXIC is available in a small form-factor package, typically measuring 5mm x 5mm. The package type is usually QFN (Quad Flat No-Lead).

Essence

The essence of the KSZ9031MNXIC lies in its ability to establish a reliable physical connection between Ethernet devices, facilitating high-speed data transfer.

Packaging/Quantity

The IC is commonly supplied in tape and reel packaging, with a quantity of around 2500 units per reel.

Specifications

  • Supported Ethernet Standards: 10BASE-T, 100BASE-TX, 1000BASE-T
  • Supply Voltage: 3.3V
  • Operating Temperature Range: -40°C to +85°C
  • Interface: MII (Media Independent Interface), RMII (Reduced Media Independent Interface), RGMII (Reduced Gigabit Media Independent Interface)
  • Power Consumption: Low power consumption design
  • ESD Protection: Built-in electrostatic discharge protection

Detailed Pin Configuration

The KSZ9031MNXIC has a total of 48 pins. The pin configuration is as follows:

  1. VDDIO
  2. VDDA
  3. VDDC
  4. VDDXTAL
  5. XTAL_OUT
  6. XTAL_IN
  7. REF_CLK
  8. TX_CLK
  9. RX_CLK
  10. CRS_DV
  11. RXD0
  12. RXD1
  13. RXD2
  14. RXD3
  15. RX_CTL
  16. RX_ER
  17. MDIO
  18. MDC
  19. TX_EN
  20. TXD0
  21. TXD1
  22. TXD2
  23. TXD3
  24. TX_CTL
  25. COL
  26. LED0
  27. LED1
  28. LED2
  29. LED3
  30. LED4
  31. LED5
  32. LED6
  33. LED7
  34. LED8
  35. LED9
  36. LED10
  37. LED11
  38. LED12
  39. LED13
  40. LED14
  41. LED15
  42. GND
  43. GND
  44. GND
  45. GND
  46. GND
  47. GND
  48. GND

Functional Features

  • Auto-negotiation: The KSZ9031MNXIC supports auto-negotiation, allowing it to automatically determine the best Ethernet speed and duplex mode for communication.
  • Auto-MDIX: It features auto-MDIX functionality, eliminating the need for crossover cables by automatically detecting and adjusting to the correct wiring configuration.
  • Energy-Efficient Ethernet: The IC incorporates energy-efficient Ethernet technology, reducing power consumption during periods of low network activity.
  • Link Quality Indication (LQI): It provides link quality indication, enabling monitoring of the link quality and signal integrity.
  • Loopback Modes: The KSZ9031MNXIC offers loopback modes for diagnostic and testing purposes.

Advantages and Disadvantages

Advantages

  • Compact size and integration
  • Support for various Ethernet standards
  • Low power consumption
  • Advanced features like auto-negotiation and auto-MDIX
  • Reliable performance and robust data transmission

Disadvantages

  • Limited availability of alternative models
  • Higher cost compared to some other PHY ICs

Working Principles

The KSZ9031MNXIC operates by receiving and transmitting electrical signals over the Ethernet cable. It converts the digital data from the MAC (Media Access Control) layer into analog signals suitable for transmission over the physical medium. On the receiving end, it performs the reverse process, converting the received analog signals back into digital data for the MAC layer.

Detailed Application Field Plans

The KSZ9031MNXIC finds applications in various fields, including: - Networking equipment such as switches, routers, and gateways - Industrial automation systems - Automotive electronics - Consumer electronics devices with Ethernet connectivity - Internet

Enumere 10 preguntas y respuestas comunes relacionadas con la aplicación de KSZ9031MNXIC en soluciones técnicas

Sure! Here are 10 common questions and answers related to the application of KSZ9031MNXIC in technical solutions:

  1. Q: What is KSZ9031MNXIC? A: KSZ9031MNXIC is a highly integrated Ethernet physical layer transceiver (PHY) chip designed for use in various networking applications.

  2. Q: What are the key features of KSZ9031MNXIC? A: Some key features of KSZ9031MNXIC include support for 10/100/1000 Mbps data rates, auto-negotiation, energy-efficient Ethernet, and various diagnostic capabilities.

  3. Q: Can KSZ9031MNXIC be used in industrial applications? A: Yes, KSZ9031MNXIC is suitable for industrial applications due to its robust design, wide temperature range support, and compliance with industrial standards.

  4. Q: How does KSZ9031MNXIC support energy-efficient Ethernet? A: KSZ9031MNXIC incorporates advanced power-saving features such as Energy Detect Power-Down mode and Wake-on-LAN functionality to minimize power consumption during idle periods.

  5. Q: Does KSZ9031MNXIC support auto-MDIX (Automatic Medium Dependent Interface Crossover)? A: Yes, KSZ9031MNXIC supports auto-MDIX, which allows it to automatically detect and adjust for straight-through or crossover Ethernet cable connections.

  6. Q: Can KSZ9031MNXIC operate on a single power supply voltage? A: Yes, KSZ9031MNXIC can operate on a single 3.3V power supply voltage, making it compatible with a wide range of systems.

  7. Q: Is KSZ9031MNXIC compatible with different media types like copper and fiber? A: KSZ9031MNXIC is primarily designed for copper-based Ethernet connections, but it can be used with external fiber transceivers to support fiber optic connections.

  8. Q: What interfaces does KSZ9031MNXIC support? A: KSZ9031MNXIC supports various interfaces such as MII (Media Independent Interface), RMII (Reduced Media Independent Interface), RGMII (Reduced Gigabit Media Independent Interface), and SGMII (Serial Gigabit Media Independent Interface).

  9. Q: Does KSZ9031MNXIC have built-in diagnostic capabilities? A: Yes, KSZ9031MNXIC includes built-in diagnostic features like loopback modes, link quality indicators, and cable diagnostics to aid in troubleshooting and network maintenance.

  10. Q: Is KSZ9031MNXIC compliant with industry standards? A: Yes, KSZ9031MNXIC is compliant with various industry standards such as IEEE 802.3, IEEE 1588, and IEEE 802.3az (Energy-Efficient Ethernet).

Please note that these answers are general and may vary depending on the specific implementation and requirements of your technical solution.