La imagen puede ser una representación.
Consulte las especificaciones para obtener detalles del producto.
PIC16C73A-04I/SO
Product Overview
Category
The PIC16C73A-04I/SO belongs to the category of microcontrollers.
Use
This microcontroller is commonly used in various electronic applications that require embedded control and processing capabilities.
Characteristics
- Low power consumption
- High-performance RISC CPU
- Wide operating voltage range
- On-chip program memory
- Flexible I/O ports
- Timer modules for precise timing operations
- Serial communication interfaces
Package
The PIC16C73A-04I/SO is available in a small outline (SO) package, which allows for easy integration into compact electronic devices.
Essence
The essence of the PIC16C73A-04I/SO lies in its ability to provide efficient control and processing capabilities within a small form factor.
Packaging/Quantity
This microcontroller is typically packaged in reels or tubes, with each containing a specific quantity of units. The exact packaging and quantity may vary depending on the supplier.
Specifications
- Operating Voltage: 2.0V to 5.5V
- Maximum Clock Frequency: 20 MHz
- Program Memory Size: 4 KB
- RAM Size: 192 bytes
- Number of I/O Pins: 22
- ADC Channels: 8
- Timers: 3
- Communication Interfaces: USART, SPI, I2C
Detailed Pin Configuration
The PIC16C73A-04I/SO has a total of 28 pins, each serving a specific purpose. The pin configuration is as follows:
- VDD - Power supply voltage
- RA0/AN0 - Analog input / Digital I/O
- RA1/AN1 - Analog input / Digital I/O
- RA2/AN2 - Analog input / Digital I/O
- RA3/AN3 - Analog input / Digital I/O
- RA4/T0CKI/C1OUT - Timer0 clock input / Digital I/O / Comparator output
- RA5/AN4/MCLR/VPP - Analog input / Master Clear input / Programming voltage
- RE0/RD/AN5 - Port E0 / Port D / Analog input
- RE1/WR/AN6 - Port E1 / Port W / Analog input
- RE2/CS/AN7 - Port E2 / Chip Select / Analog input
- VSS - Ground
- RB0/INT - Port B0 / External interrupt input
- RB1/SDI/SDA - Port B1 / SPI Data Input / I2C Data
- RB2/SDO/SCL - Port B2 / SPI Data Output / I2C Clock
- RB3/PGM - Port B3 / In-Circuit Serial Programming
- RB4/PGC - Port B4 / In-Circuit Debugging Clock
- RB5/PGD - Port B5 / In-Circuit Debugging Data
- RB6/PGM - Port B6 / In-Circuit Serial Programming
- RB7/PGC - Port B7 / In-Circuit Debugging Clock
- RB8/PGD - Port B8 / In-Circuit Debugging Data
- RC0/T1OSO/T1CKI - Port C0 / Timer1 oscillator output / Timer1 clock input
- RC1/T1OSI/CCP2 - Port C1 / Timer1 oscillator input / CCP2
- RC2/CCP1 - Port C2 / CCP1
- RC3/SCK/SCL - Port C3 / SPI Clock / I2C Clock
- RC4/SDO/SDA - Port C4 / SPI Data Output / I2C Data
- RC5/SDI/SCL - Port C5 / SPI Data Input / I2C Clock
- RC6/TX/CK - Port C6 / USART Transmit / Clock
- RC7/RX/DT - Port C7 / USART Receive / Data
Functional Features
The PIC16C73A-04I/SO offers several functional features that enhance its usability and performance:
- High-performance RISC CPU: The microcontroller is equipped with a powerful RISC CPU, allowing for efficient execution of instructions.
- Flexible I/O Ports: The device provides a range of I/O ports that can be configured to suit specific application requirements.
- Timer Modules: Built-in timer modules enable precise timing operations, essential for time-sensitive applications.
- Serial Communication Interfaces: The microcontroller supports USART, SPI, and I2C interfaces, facilitating communication with other devices.
- On-Chip Program Memory: With 4 KB of program memory, the
Enumere 10 preguntas y respuestas comunes relacionadas con la aplicación de PIC16C73A-04I/SO en soluciones técnicas
What is the maximum operating frequency of PIC16C73A-04I/SO?
- The maximum operating frequency of PIC16C73A-04I/SO is 4 MHz.
What are the key features of PIC16C73A-04I/SO?
- PIC16C73A-04I/SO features 28/40-pin, 8-bit CMOS microcontrollers with A/D Converter.
Can PIC16C73A-04I/SO be used in battery-powered applications?
- Yes, PIC16C73A-04I/SO can be used in battery-powered applications due to its low power consumption.
What programming language is commonly used for PIC16C73A-04I/SO?
- Assembly language and C are commonly used for programming PIC16C73A-04I/SO.
Is PIC16C73A-04I/SO suitable for embedded control applications?
- Yes, PIC16C73A-04I/SO is suitable for embedded control applications due to its versatile features.
What are the communication interfaces supported by PIC16C73A-04I/SO?
- PIC16C73A-04I/SO supports USART, SPI, and I2C communication interfaces.
Can PIC16C73A-04I/SO be used in industrial automation systems?
- Yes, PIC16C73A-04I/SO can be used in industrial automation systems for control and monitoring purposes.
Does PIC16C73A-04I/SO have built-in analog-to-digital conversion capabilities?
- Yes, PIC16C73A-04I/SO has a built-in 8-channel analog-to-digital converter.
What are the typical voltage requirements for PIC16C73A-04I/SO?
- PIC16C73A-04I/SO operates at typical voltage requirements of 2.0V to 5.5V.
Are there any development tools available for PIC16C73A-04I/SO?
- Yes, there are various development tools such as MPLAB IDE and PICkit programmers available for PIC16C73A-04I/SO.