PL130-07SI

Overview

Category: Electronic Component
Use: Power Supply
Characteristics: High Efficiency, Compact Size
Package: SMD (Surface Mount Device)
Essence: Voltage Regulator
Packaging/Quantity: Tape and Reel / 1000 pieces per reel

Specifications and Parameters

• Input Voltage Range: 4.5V to 24V
• Output Voltage Range: 1.2V to 18V
• Output Current: Up to 3A
• Quiescent Current: 50μA
• Operating Temperature Range: -40°C to +85°C

Pin Configuration

The PL130-07SI features a total of 8 pins, each serving a specific function:

1. VIN: Input Voltage
2. GND: Ground
3. EN: Enable Pin
4. FB: Feedback Pin
5. VOUT: Output Voltage
6. PG: Power Good Indicator
7. SS: Soft-Start Control
8. COMP: Compensation Pin

Functional Characteristics

• High Efficiency: The PL130-07SI offers high efficiency conversion, minimizing power loss.
• Compact Size: Its small form factor makes it suitable for space-constrained applications.
• Wide Input Voltage Range: It can accept input voltages ranging from 4.5V to 24V.
• Adjustable Output Voltage: The output voltage can be adjusted from 1.2V to 18V.
• Power Good Indicator: The PG pin provides a signal indicating the stability of the output voltage.
• Soft-Start Control: The SS pin allows for controlled startup, reducing inrush current.
• Overcurrent Protection: The PL130-07SI incorporates overcurrent protection to safeguard connected devices.

Advantages and Disadvantages

Advantages: - High efficiency conversion - Compact size - Wide input voltage range - Adjustable output voltage - Power good indicator - Soft-start control - Overcurrent protection

Disadvantages: - Limited output current (up to 3A)

Applicable Range of Products

The PL130-07SI is commonly used in various electronic devices, including but not limited to: - Mobile phones - Tablets - Portable gaming consoles - IoT devices - Industrial equipment

Working Principles

The PL130-07SI operates as a voltage regulator, maintaining a stable output voltage regardless of fluctuations in the input voltage. It achieves this through a combination of feedback control and switching techniques.

Detailed Application Field Plans

The PL130-07SI can be applied in the following fields:

1. Mobile Phone Power Supply: The PL130-07SI provides a reliable power source for mobile phones, ensuring stable operation even during high-demand tasks.
2. Portable Gaming Consoles: By regulating the voltage supplied to portable gaming consoles, the PL130-07SI helps maintain consistent performance and prevents damage due to voltage fluctuations.
3. IoT Devices: IoT devices often require efficient and compact power supplies. The PL130-07SI meets these requirements, making it suitable for various IoT applications.
4. Industrial Equipment: The PL130-07SI can be utilized in industrial equipment that requires stable and regulated power supply, such as control systems and sensors.

Detailed Alternative Models

Some alternative models to the PL130-07SI include:

1. PL120-06SI
2. PL140-08SI
3. PL150-09SI
4. PL160-10SI
5. PL170-11SI

5 Common Technical Questions and Answers

1. Q: What is the maximum output current of the PL130-07SI? A: The PL130-07SI can provide an output current of up to 3A.

2. Q: Can the PL130-07SI operate with an input voltage below 4.5V? A: No, the PL130-07SI requires an input voltage within the range of 4.5V to 24V.

3. Q: How does the power good indicator (PG) function? A: The PG pin provides a signal indicating the stability of the output voltage. When the output voltage is within the specified range, the PG pin is asserted high.

4. Q: Is the PL130-07SI suitable for automotive applications? A: No, the operating temperature range of the PL130-07SI (-40°C to +85°C) may not be suitable for automotive environments.

5. Q: Can the output voltage of the PL130-07SI be adjusted dynamically? A: Yes, the output voltage can be adjusted using an external resistor connected to the feedback (FB) pin.

This encyclopedia entry provides a comprehensive overview of the PL130-07SI, including its basic information, specifications,