La imagen puede ser una representación.
Consulte las especificaciones para obtener detalles del producto.
MT29F256G08AUAAAC5-IT:A
Product Overview
Category
MT29F256G08AUAAAC5-IT:A belongs to the category of NAND flash memory.
Use
This product is primarily used for data storage in various electronic devices such as smartphones, tablets, digital cameras, and solid-state drives (SSDs).
Characteristics
- High storage capacity: The MT29F256G08AUAAAC5-IT:A offers a storage capacity of 256 gigabytes (GB), allowing for ample space to store large amounts of data.
- Fast data transfer rate: With its high-speed interface, this NAND flash memory enables quick read and write operations, ensuring efficient data processing.
- Reliable performance: The product is designed to provide reliable and consistent performance, ensuring data integrity and durability.
- Low power consumption: The MT29F256G08AUAAAC5-IT:A is energy-efficient, consuming minimal power during operation, which helps prolong battery life in portable devices.
- Compact package: This NAND flash memory comes in a compact form factor, making it suitable for integration into small-sized electronic devices.
- RoHS compliant: The product adheres to the Restriction of Hazardous Substances (RoHS) directive, ensuring environmental friendliness.
Packaging/Quantity
The MT29F256G08AUAAAC5-IT:A is typically packaged in a surface-mount technology (SMT) package. It is available in reel packaging, with each reel containing a specific quantity of units, usually around 1000 pieces.
Specifications
- Memory Type: NAND Flash
- Capacity: 256 GB
- Interface: Universal Flash Storage (UFS)
- Voltage Supply: 2.7V - 3.6V
- Operating Temperature Range: -40°C to +85°C
- Package Type: TSOP (Thin Small Outline Package)
- Pin Count: 48
Detailed Pin Configuration
The MT29F256G08AUAAAC5-IT:A has a total of 48 pins. The pin configuration is as follows:
- VCC
- VCCQ
- GND
- RE# (Read Enable)
- WE# (Write Enable)
- CLE (Command Latch Enable)
- ALE (Address Latch Enable)
- CE# (Chip Enable)
- R/B# (Ready/Busy)
- DQS (Data Strobe)
- DQ0-DQ7 (Data Input/Output)
- NC (No Connection)
- NC (No Connection)
- NC (No Connection)
- NC (No Connection)
- NC (No Connection)
- NC (No Connection)
- NC (No Connection)
- NC (No Connection)
- NC (No Connection)
- NC (No Connection)
- NC (No Connection)
- NC (No Connection)
- NC (No Connection)
- NC (No Connection)
- NC (No Connection)
- NC (No Connection)
- NC (No Connection)
- NC (No Connection)
- NC (No Connection)
- NC (No Connection)
- NC (No Connection)
- NC (No Connection)
- NC (No Connection)
- NC (No Connection)
- NC (No Connection)
- NC (No Connection)
- NC (No Connection)
- NC (No Connection)
- NC (No Connection)
- NC (No Connection)
- NC (No Connection)
- NC (No Connection)
- NC (No Connection)
- NC (No Connection)
- NC (No Connection)
- NC (No Connection)
- NC (No Connection)
Functional Features
- High-speed data transfer: The MT29F256G08AUAAAC5-IT:A offers fast read and write speeds, allowing for efficient data processing.
- Error correction: This NAND flash memory incorporates error correction techniques to ensure data integrity and minimize the risk of data loss or corruption.
- Wear leveling: The product employs wear leveling algorithms to distribute data evenly across memory cells, extending the lifespan of the device.
- Bad block management: It includes mechanisms to identify and manage bad blocks, ensuring reliable operation even in the presence of defective memory cells.
- Power-saving modes: The MT29F256G08AUAAAC5-IT:A supports various power-saving modes, reducing energy consumption during idle periods.
Advantages and Disadvantages
Advantages
- Large storage capacity
- Fast data transfer rate
- Reliable performance
- Low power consumption
- Compact form factor
- RoHS compliant
Disadvantages
- Relatively high cost compared to lower-capacity NAND flash memory options
- Limited compatibility with older devices that do not support
Enumere 10 preguntas y respuestas comunes relacionadas con la aplicación de MT29F256G08AUAAAC5-IT:A en soluciones técnicas
Question: What is the capacity of the MT29F256G08AUAAAC5-IT:A memory chip?
Answer: The MT29F256G08AUAAAC5-IT:A has a capacity of 256 gigabits (32 gigabytes).
Question: What is the interface type supported by the MT29F256G08AUAAAC5-IT:A?
Answer: The MT29F256G08AUAAAC5-IT:A supports the NAND Flash interface.
Question: What is the operating voltage range for the MT29F256G08AUAAAC5-IT:A?
Answer: The MT29F256G08AUAAAC5-IT:A operates at a voltage range of 2.7V to 3.6V.
Question: What is the maximum data transfer rate of the MT29F256G08AUAAAC5-IT:A?
Answer: The MT29F256G08AUAAAC5-IT:A has a maximum data transfer rate of up to 200 megabytes per second.
Question: Does the MT29F256G08AUAAAC5-IT:A support hardware encryption?
Answer: No, the MT29F256G08AUAAAC5-IT:A does not have built-in hardware encryption capabilities.
Question: Can the MT29F256G08AUAAAC5-IT:A be used in automotive applications?
Answer: Yes, the MT29F256G08AUAAAC5-IT:A is suitable for use in automotive environments.
Question: What is the temperature range within which the MT29F256G08AUAAAC5-IT:A can operate?
Answer: The MT29F256G08AUAAAC5-IT:A can operate within a temperature range of -40°C to +85°C.
Question: Does the MT29F256G08AUAAAC5-IT:A support error correction codes (ECC)?
Answer: Yes, the MT29F256G08AUAAAC5-IT:A supports hardware-based ECC for data integrity.
Question: Can the MT29F256G08AUAAAC5-IT:A be used in industrial control systems?
Answer: Yes, the MT29F256G08AUAAAC5-IT:A is suitable for use in industrial control systems.
Question: What is the package type of the MT29F256G08AUAAAC5-IT:A?
Answer: The MT29F256G08AUAAAC5-IT:A comes in a 48-ball VFBGA package.