Microsemi Corporation
La imagen puede ser una representación.
Consulte las especificaciones para obtener detalles del producto.
MXP4KE10A
Ver Detalle Hojas de datos

MXP4KE10A Product Overview

Introduction

The MXP4KE10A is a high-performance electronic component designed for use in power supply and voltage regulation applications. This entry provides an in-depth overview of the MXP4KE10A, including its product category, basic information, specifications, pin configuration, functional features, advantages and disadvantages, working principles, application field plans, and alternative models.

Basic Information Overview

  • Category: Electronic Component
  • Use: Power Supply and Voltage Regulation
  • Characteristics: High Performance, Reliable, Precision
  • Package: TO-220AB
  • Essence: Voltage Suppressor Diode
  • Packaging/Quantity: Tape & Reel, 1000 units per reel

Specifications

  • Peak Pulse Power: 400W
  • Breakdown Voltage Range: 6.8V to 440V
  • Operating Temperature Range: -55°C to +175°C
  • Polarity: Unidirectional

Detailed Pin Configuration

The MXP4KE10A features a standard TO-220AB package with three pins: 1. Pin 1: Anode 2. Pin 2: Cathode 3. Pin 3: Not Connected (NC)

Functional Features

  • Transient Voltage Suppression: Provides protection against voltage transients.
  • Fast Response Time: Rapidly clamps transient voltages to a safe level.
  • Low Leakage Current: Ensures minimal power loss during normal operation.
  • High Surge Capability: Withstands high surge currents without degradation.

Advantages and Disadvantages

Advantages

  • Effective protection against voltage spikes
  • Fast response time
  • Wide breakdown voltage range

Disadvantages

  • Higher cost compared to standard diodes
  • Requires careful handling to prevent damage during installation

Working Principles

The MXP4KE10A operates by diverting excess transient voltage away from sensitive components in a circuit, thereby protecting them from potential damage. When a transient voltage spike occurs, the diode rapidly conducts, shunting the excess energy to ground and limiting the voltage across the protected circuit.

Detailed Application Field Plans

The MXP4KE10A is widely used in various applications, including: - Power Supplies - Automotive Electronics - Industrial Control Systems - Telecommunication Equipment - Consumer Electronics

Detailed and Complete Alternative Models

For applications requiring similar transient voltage suppression capabilities, alternative models to consider include: - MXP4KE6.8A - MXP4KE15A - MXP4KE30A - MXP4KE200A

In conclusion, the MXP4KE10A offers reliable and efficient transient voltage suppression for a wide range of applications, making it an essential component in ensuring the robustness and longevity of electronic systems.

Word Count: 410

Enumere 10 preguntas y respuestas comunes relacionadas con la aplicación de MXP4KE10A en soluciones técnicas

  1. What is MXP4KE10A?

    • MXP4KE10A is a type of transient voltage suppressor diode used to protect electronic circuits from voltage spikes and transients.

  2. What is the maximum voltage rating for MXP4KE10A?

    • The maximum voltage rating for MXP4KE10A is 10V.

  3. What is the peak pulse power handling capability of MXP4KE10A?

    • MXP4KE10A has a peak pulse power handling capability of 400W.

  4. How does MXP4KE10A protect electronic circuits?

    • MXP4KE10A diverts excess current away from sensitive components when voltage spikes occur, preventing damage to the circuit.

  5. In what applications is MXP4KE10A commonly used?

    • MXP4KE10A is commonly used in power supplies, telecommunications equipment, automotive electronics, and industrial control systems.

  6. What is the response time of MXP4KE10A to voltage transients?

    • The response time of MXP4KE10A is very fast, typically in the nanosecond range.

  7. Can MXP4KE10A be used for both AC and DC circuits?

    • Yes, MXP4KE10A can be used for both AC and DC circuits.

  8. What are the temperature specifications for MXP4KE10A?

    • MXP4KE10A typically operates within a temperature range of -55°C to +175°C.

  9. Is MXP4KE10A RoHS compliant?

    • Yes, MXP4KE10A is RoHS compliant, meaning it meets the Restriction of Hazardous Substances directive.

  10. Are there any specific layout or mounting considerations for using MXP4KE10A in a circuit?

    • It is recommended to minimize the length of the leads and keep the device close to the protected circuit to reduce inductance and maximize its effectiveness.