74LVT162374DL,118

Basic Information Overview

• Category: Integrated Circuit (IC)
• Use: Data storage and transfer
• Characteristics: Low voltage, high-speed, 16-bit D-type flip-flop with 3-state outputs
• Package: TSSOP (Thin Shrink Small Outline Package)
• Essence: Flip-flop with 3-state outputs for efficient data storage and transfer
• Packaging/Quantity: Available in reels of 2500 units

Specifications

• Logic Family: LVT (Low Voltage TTL)
• Number of Bits: 16
• Output Type: 3-state
• Supply Voltage Range: 2.7V to 3.6V
• High-Level Output Current: -24mA
• Low-Level Output Current: 24mA
• Propagation Delay Time: 4.5ns (max)
• Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

1. OE (Output Enable) - Output enable control pin
2. CP (Clock Pulse) - Clock input for flip-flop operation
3. D0-D15 (Data Inputs) - 16-bit data input pins
4. Q0-Q15 (Outputs) - 16-bit data output pins
5. GND (Ground) - Ground reference
6. VCC (Supply Voltage) - Power supply input

Functional Features

• 16-bit D-type flip-flop with 3-state outputs
• High-speed operation suitable for data storage and transfer applications
• Low voltage operation for reduced power consumption
• 3-state outputs allow multiple devices to share a common bus
• Output enable control for flexible data flow management

Advantages

• High-speed operation enables efficient data transfer
• Low voltage operation reduces power consumption
• 3-state outputs facilitate bus sharing among multiple devices
• Output enable control provides flexibility in managing data flow

Disadvantages

• Limited to 16-bit data storage and transfer applications
• Requires external clock signal for flip-flop operation
• Operating temperature range may not be suitable for extreme environments

Working Principles

The 74LVT162374DL,118 is a 16-bit D-type flip-flop with 3-state outputs. It operates based on the clock input (CP) and stores data from the 16-bit data inputs (D0-D15) when a rising edge is detected on the clock pulse. The stored data can then be accessed through the 16-bit data outputs (Q0-Q15). The output enable (OE) pin controls the state of the outputs, allowing them to be either active or in a high-impedance state.

Detailed Application Field Plans

The 74LVT162374DL,118 is commonly used in various applications that require efficient data storage and transfer. Some potential application fields include: 1. Computer memory systems 2. Data communication equipment 3. Industrial automation systems 4. Automotive electronics 5. Consumer electronics

Detailed and Complete Alternative Models

1. 74LVTH162374DL,118 - Similar to 74LVT162374DL,118 but with TTL input/output compatibility.
2. 74ACT162374DL,118 - Similar to 74LVT162374DL,118 but with higher speed and wider operating temperature range.
3. 74HC162374DL,118 - Similar to 74LVT162374DL,118 but with lower power consumption and wider supply voltage range.

(Note: These alternative models are just examples and not an exhaustive list.)

This entry provides an overview of the 74LVT162374DL,118 integrated circuit, including its basic information, specifications, pin configuration, functional features, advantages, disadvantages, working principles, application field plans, and alternative models.