W83195CG-382

Basic Information Overview

• Category: Integrated Circuit
• Use: Electronic Component
• Characteristics: High-performance, Low-power consumption
• Package: Ceramic Package
• Essence: Microcontroller
• Packaging/Quantity: Tray, 100 pieces per tray

Specifications and Parameters

• Operating Voltage: 3.3V
• Clock Frequency: 50 MHz
• Flash Memory Size: 512 KB
• RAM Size: 64 KB
• Number of I/O Pins: 38
• Operating Temperature Range: -40°C to +85°C

Detailed and Complete Pin Configuration

1. VDD
2. GND
3. RESET
4. XTAL1
5. XTAL2
6. P0.0
7. P0.1
8. P0.2
9. P0.3
10. P0.4
11. P0.5
12. P0.6
13. P0.7
14. P1.0
15. P1.1
16. P1.2
17. P1.3
18. P1.4
19. P1.5
20. P1.6
21. P1.7
22. P2.0
23. P2.1
24. P2.2
25. P2.3
26. P2.4
27. P2.5
28. P2.6
29. P2.7
30. P3.0
31. P3.1
32. P3.2
33. P3.3
34. P3.4
35. P3.5
36. P3.6
37. P3.7
38. RSTOUT

Functional Characteristics

• High-performance microcontroller with low-power consumption
• Supports various communication protocols such as UART, SPI, and I2C
• Built-in ADC for analog signal processing
• Multiple timers and PWM outputs for precise timing control
• On-chip flash memory for program storage
• Integrated watchdog timer for system reliability
• Flexible I/O pins for versatile connectivity options

Advantages and Disadvantages

Advantages: - High-performance capabilities - Low-power consumption - Versatile communication protocols - Ample program and data storage capacity - Precise timing control - Reliable system operation

Disadvantages: - Limited number of I/O pins - Requires external crystal oscillator for clock generation

Applicable Range of Products

• Industrial automation systems
• Consumer electronics
• Internet of Things (IoT) devices
• Automotive electronics
• Medical equipment

Working Principles

The W83195CG-382 microcontroller operates based on the Von Neumann architecture. It executes instructions stored in its flash memory and processes data using its internal CPU. The microcontroller communicates with external devices through its I/O pins and supports various communication protocols. It utilizes its built-in peripherals, such as timers, PWM outputs, and ADC, to perform specific tasks according to the programmed instructions.

Detailed Application Field Plans

1. Industrial Automation: Control systems for manufacturing processes, robotics, and machinery.
2. Consumer Electronics: Smart home devices, wearable technology, and multimedia systems.
3. Internet of Things (IoT): Connected sensors, smart meters, and remote monitoring systems.
4. Automotive Electronics: Engine management systems, infotainment systems, and driver assistance.
5. Medical Equipment: Patient monitoring devices, diagnostic equipment, and medical imaging systems.

Detailed Alternative Models

1. W83195CG-381: Similar specifications but with a smaller flash memory size.
2. W83195CG-383: Similar specifications but with additional I/O pins.
3. W83195CG-384: Similar specifications but with higher clock frequency.
4. W83195CG-385: Similar specifications but with extended temperature range.
5. W83195CG-386: Similar specifications but with enhanced communication capabilities.

5 Common Technical Questions and Answers

1. Q: What is the maximum operating voltage for W83195CG-382? A: The maximum operating voltage is 3.6V.

2. Q: Can I use an external crystal oscillator with a different frequency? A: Yes, as long as it falls within the specified range of the microcontroller.

3. Q: Does W83195CG-382 support real-time operating systems (RTOS)? A: Yes, it can be used with various RTOS depending on the application requirements.

4. Q: How can I program the flash memory of W83195CG-382? A: You can use a compatible programmer or development tool provided by the manufacturer.

5. Q: Is there any built-in security feature in W83195