NXP USA Inc.
La imagen puede ser una representación.
Consulte las especificaciones para obtener detalles del producto.
MC68HC11F1CFN3
Ver Detalle Hojas de datos

MC68HC11F1CFN3

Product Overview

  • Category: Microcontroller
  • Use: Control and processing of electronic systems
  • Characteristics: High-performance, low-power consumption, versatile
  • Package: 52-pin plastic quad flat pack (PQFP)
  • Essence: Integrated circuit for embedded systems
  • Packaging/Quantity: Available in reels of 250 units

Specifications

  • Architecture: 8-bit
  • Clock Speed: Up to 2 MHz
  • Memory: 512 bytes of RAM, 16 KB of ROM
  • I/O Ports: 38 general-purpose I/O pins
  • Timers: Two 16-bit timers
  • Serial Communication: Asynchronous and synchronous serial interfaces
  • Analog-to-Digital Converter: 8-channel, 8-bit resolution
  • Operating Voltage: 2.7V to 5.5V

Pin Configuration

The MC68HC11F1CFN3 microcontroller has a total of 52 pins. The pin configuration is as follows:

  1. VDD - Power supply voltage
  2. PA0 - General-purpose I/O pin
  3. PA1 - General-purpose I/O pin
  4. PA2 - General-purpose I/O pin
  5. PA3 - General-purpose I/O pin
  6. PA4 - General-purpose I/O pin
  7. PA5 - General-purpose I/O pin
  8. PA6 - General-purpose I/O pin
  9. PA7 - General-purpose I/O pin
  10. RESET - Reset input
  11. XTAL1 - Crystal oscillator input
  12. XTAL2 - Crystal oscillator output
  13. VSS - Ground
  14. PB0 - General-purpose I/O pin
  15. PB1 - General-purpose I/O pin
  16. PB2 - General-purpose I/O pin
  17. PB3 - General-purpose I/O pin
  18. PB4 - General-purpose I/O pin
  19. PB5 - General-purpose I/O pin
  20. PB6 - General-purpose I/O pin
  21. PB7 - General-purpose I/O pin
  22. PC0 - General-purpose I/O pin
  23. PC1 - General-purpose I/O pin
  24. PC2 - General-purpose I/O pin
  25. PC3 - General-purpose I/O pin
  26. PC4 - General-purpose I/O pin
  27. PC5 - General-purpose I/O pin
  28. PC6 - General-purpose I/O pin
  29. PC7 - General-purpose I/O pin
  30. PD0 - General-purpose I/O pin
  31. PD1 - General-purpose I/O pin
  32. PD2 - General-purpose I/O pin
  33. PD3 - General-purpose I/O pin
  34. PD4 - General-purpose I/O pin
  35. PD5 - General-purpose I/O pin
  36. PD6 - General-purpose I/O pin
  37. PD7 - General-purpose I/O pin
  38. PE0 - General-purpose I/O pin
  39. PE1 - General-purpose I/O pin
  40. PE2 - General-purpose I/O pin
  41. PE3 - General-purpose I/O pin
  42. PE4 - General-purpose I/O pin
  43. PE5 - General-purpose I/O pin
  44. PE6 - General-purpose I/O pin
  45. PE7 - General-purpose I/O pin
  46. PF0 - General-purpose I/O pin
  47. PF1 - General-purpose I/O pin
  48. PF2 - General-purpose I/O pin
  49. PF3 - General-purpose I/O pin
  50. PF4 - General-purpose I/O pin
  51. PF5 - General-purpose I/O pin
  52. VDD - Power supply voltage

Functional Features

  • High-performance 8-bit microcontroller with versatile I/O capabilities
  • Low-power consumption for energy-efficient applications
  • Integrated analog-to-digital converter for sensor interfacing
  • Multiple serial communication interfaces for data exchange
  • Two 16-bit timers for precise timing operations
  • Flexible clock speed up to 2 MHz
  • Ample memory for program storage and data handling

Advantages and Disadvantages

Advantages

  • Versatile and flexible I/O capabilities
  • Low power consumption for energy-efficient designs
  • Integrated analog-to-digital converter simplifies sensor interfacing
  • Multiple serial communication interfaces enable easy data exchange
  • Ample memory for program storage and data handling

Disadvantages

  • Limited processing power compared to higher-bit microcontrollers
  • Relatively low clock speed compared to modern microcontrollers
  • Limited memory capacity for complex applications

Working Principles

The MC68HC11F1CFN3 microcontroller operates based on the Von Neumann architecture. It executes instructions stored in its ROM

Enumere 10 preguntas y respuestas comunes relacionadas con la aplicación de MC68HC11F1CFN3 en soluciones técnicas

Sure! Here are 10 common questions and answers related to the application of MC68HC11F1CFN3 in technical solutions:

Q1: What is MC68HC11F1CFN3? A1: MC68HC11F1CFN3 is a microcontroller unit (MCU) manufactured by Motorola. It is widely used in various technical solutions due to its versatility and features.

Q2: What are the key features of MC68HC11F1CFN3? A2: Some key features of MC68HC11F1CFN3 include an 8-bit CPU, on-chip memory, multiple I/O ports, timers, serial communication interfaces, and analog-to-digital converters.

Q3: What are the typical applications of MC68HC11F1CFN3? A3: MC68HC11F1CFN3 is commonly used in applications such as automotive systems, industrial control systems, robotics, home automation, and consumer electronics.

Q4: How much program memory does MC68HC11F1CFN3 have? A4: MC68HC11F1CFN3 has 32 KB of on-chip program memory, which can be expanded using external memory devices if needed.

Q5: Can MC68HC11F1CFN3 communicate with other devices? A5: Yes, MC68HC11F1CFN3 supports multiple serial communication interfaces like UART, SPI, and I2C, allowing it to communicate with other devices such as sensors, displays, or external controllers.

Q6: Does MC68HC11F1CFN3 have any analog capabilities? A6: Yes, MC68HC11F1CFN3 has built-in analog-to-digital converters (ADCs), which enable it to interface with analog sensors or signals.

Q7: Can MC68HC11F1CFN3 control motors or actuators? A7: Yes, MC68HC11F1CFN3 can control motors or actuators by utilizing its general-purpose I/O ports or by interfacing with motor driver circuits.

Q8: Is MC68HC11F1CFN3 suitable for battery-powered applications? A8: Yes, MC68HC11F1CFN3 is designed to operate at low power and has various power-saving features, making it suitable for battery-powered applications.

Q9: Can MC68HC11F1CFN3 be programmed in high-level languages? A9: Yes, MC68HC11F1CFN3 supports programming in high-level languages like C or assembly language, providing flexibility to developers.

Q10: Are there any development tools available for MC68HC11F1CFN3? A10: Yes, there are various development tools available, including integrated development environments (IDEs), compilers, debuggers, and programmers, specifically designed for MC68HC11F1CFN3.