ON Semiconductor
La imagen puede ser una representación.
Consulte las especificaciones para obtener detalles del producto.
74ABT244CMTCX
Ver Detalle Hojas de datos

Encyclopedia Entry: 74ABT244CMTCX

Product Information Overview

  • Category: Integrated Circuit (IC)
  • Use: Buffer/Line Driver
  • Characteristics: High-speed, low-power, non-inverting, tri-state output
  • Package: TSSOP (Thin Shrink Small Outline Package)
  • Essence: The 74ABT244CMTCX is a high-performance octal buffer/line driver designed for use in various digital applications.
  • Packaging/Quantity: Available in tape and reel packaging with 2500 units per reel.

Specifications

  • Supply Voltage: 4.5V to 5.5V
  • Input Voltage: 0V to VCC
  • Output Voltage: 0V to VCC
  • Operating Temperature Range: -40°C to +85°C
  • Propagation Delay: 3.8ns (typical)
  • Output Drive Capability: ±24mA

Detailed Pin Configuration

The 74ABT244CMTCX has a total of 20 pins, which are assigned as follows:

  1. Pin 1: Output Y1
  2. Pin 2: Input A1
  3. Pin 3: Input B1
  4. Pin 4: GND (Ground)
  5. Pin 5: Output Y2
  6. Pin 6: Input A2
  7. Pin 7: Input B2
  8. Pin 8: Output Y3
  9. Pin 9: Input A3
  10. Pin 10: Input B3
  11. Pin 11: GND (Ground)
  12. Pin 12: Output Y4
  13. Pin 13: Input A4
  14. Pin 14: Input B4
  15. Pin 15: VCC (Supply Voltage)
  16. Pin 16: Output Y5
  17. Pin 17: Input A5
  18. Pin 18: Input B5
  19. Pin 19: GND (Ground)
  20. Pin 20: Output Y6

Functional Features

  • Non-inverting buffer/line driver with tri-state outputs
  • High-speed operation suitable for various digital applications
  • Low power consumption for energy-efficient designs
  • Wide operating voltage range for compatibility with different systems
  • Robust output drive capability for driving capacitive loads

Advantages and Disadvantages

Advantages: - High-speed performance enables efficient data transmission. - Tri-state outputs allow for bus sharing and easy interfacing with multiple devices. - Low power consumption reduces energy usage and extends battery life. - Wide operating voltage range ensures compatibility with different power supply levels.

Disadvantages: - Limited output drive capability may not be suitable for driving heavy loads. - The TSSOP package may require careful handling during assembly to prevent damage.

Working Principles

The 74ABT244CMTCX operates as a non-inverting buffer/line driver. It takes input signals from the A1-A8 pins and provides corresponding buffered outputs on the Y1-Y8 pins. The tri-state outputs allow the device to be effectively disconnected from the bus, enabling bus sharing among multiple devices. The IC operates at high speed and consumes low power, making it suitable for various digital applications.

Detailed Application Field Plans

The 74ABT244CMTCX can be used in a wide range of applications, including:

  1. Data communication systems
  2. Microprocessor-based systems
  3. Industrial control systems
  4. Networking equipment
  5. Automotive electronics
  6. Consumer electronics

Detailed and Complete Alternative Models

Some alternative models that offer similar functionality to the 74ABT244CMTCX include:

  1. 74HC244: A CMOS version with similar characteristics but lower power consumption.
  2. SN74LS244: A TTL version with comparable performance but higher power consumption.
  3. CD74ACT244: An advanced CMOS version with improved speed and drive capability.

These alternative models can be considered based on specific application requirements and design constraints.

Word Count: 345 words

Enumere 10 preguntas y respuestas comunes relacionadas con la aplicación de 74ABT244CMTCX en soluciones técnicas

Sure! Here are 10 common questions and answers related to the application of 74ABT244CMTCX in technical solutions:

  1. Q: What is the purpose of the 74ABT244CMTCX? A: The 74ABT244CMTCX is an octal buffer/line driver with 3-state outputs, commonly used for signal buffering and level shifting in digital circuits.

  2. Q: What is the maximum operating voltage for the 74ABT244CMTCX? A: The maximum operating voltage for the 74ABT244CMTCX is typically 5.5V.

  3. Q: Can the 74ABT244CMTCX be used for bidirectional communication? A: No, the 74ABT244CMTCX is a unidirectional buffer and cannot be used for bidirectional communication without additional circuitry.

  4. Q: What is the output current capability of the 74ABT244CMTCX? A: The 74ABT244CMTCX has a typical output current capability of ±24mA.

  5. Q: Is the 74ABT244CMTCX compatible with TTL logic levels? A: Yes, the 74ABT244CMTCX is designed to be compatible with both TTL and CMOS logic levels.

  6. Q: Can the 74ABT244CMTCX be used in high-speed applications? A: Yes, the 74ABT244CMTCX is designed for high-speed operation and can be used in applications with fast switching requirements.

  7. Q: Does the 74ABT244CMTCX have internal pull-up or pull-down resistors? A: No, the 74ABT244CMTCX does not have internal pull-up or pull-down resistors. External resistors may be required for proper signal termination.

  8. Q: What is the power supply voltage range for the 74ABT244CMTCX? A: The recommended power supply voltage range for the 74ABT244CMTCX is typically between 4.5V and 5.5V.

  9. Q: Can the 74ABT244CMTCX drive capacitive loads directly? A: Yes, the 74ABT244CMTCX has a high output drive capability and can drive moderate capacitive loads directly.

  10. Q: Is the 74ABT244CMTCX available in different package options? A: Yes, the 74ABT244CMTCX is available in various package options, such as SOIC, TSSOP, and SSOP, to accommodate different PCB layouts and assembly requirements.

Please note that the answers provided here are general and may vary depending on the specific datasheet and manufacturer's specifications of the 74ABT244CMTCX.