ON Semiconductor
La imagen puede ser una representación.
Consulte las especificaciones para obtener detalles del producto.
74LVT245WM
Ver Detalle Hojas de datos

Encyclopedia Entry: 74LVT245WM

Product Overview

Category

The 74LVT245WM belongs to the category of integrated circuits (ICs) and specifically falls under the group of bus transceivers.

Use

This IC is commonly used for bidirectional level shifting and voltage translation between different logic levels in digital systems. It enables seamless communication between devices operating at different voltage levels.

Characteristics

  • Bidirectional voltage translation
  • High-speed operation
  • Low power consumption
  • Wide operating voltage range
  • Compatibility with various logic families
  • Robust protection features against ESD (Electrostatic Discharge)

Package

The 74LVT245WM is available in a small outline package (SOP) with a total of 20 pins.

Essence

The essence of the 74LVT245WM lies in its ability to facilitate reliable and efficient data transfer between devices operating at different voltage levels, ensuring compatibility and seamless communication.

Packaging/Quantity

The IC is typically packaged in reels or tubes, with each reel containing approximately 2500 units.

Specifications

  • Supply Voltage Range: 2.7V to 3.6V
  • Logic Voltage Levels: 1.8V to 3.6V
  • Maximum Data Rate: 400 Mbps
  • Operating Temperature Range: -40°C to +85°C
  • Input/Output Capacitance: 4pF (typical)
  • Output Drive Capability: ±24mA

Detailed Pin Configuration

The 74LVT245WM has a total of 20 pins, which are assigned specific functions as follows:

  1. OE (Output Enable)
  2. A1 (Data Input/Output)
  3. B1 (Data Input/Output)
  4. A2 (Data Input/Output)
  5. B2 (Data Input/Output)
  6. A3 (Data Input/Output)
  7. B3 (Data Input/Output)
  8. A4 (Data Input/Output)
  9. B4 (Data Input/Output)
  10. GND (Ground)
  11. B5 (Data Input/Output)
  12. A5 (Data Input/Output)
  13. B6 (Data Input/Output)
  14. A6 (Data Input/Output)
  15. B7 (Data Input/Output)
  16. A7 (Data Input/Output)
  17. B8 (Data Input/Output)
  18. A8 (Data Input/Output)
  19. VCC (Power Supply)
  20. DIR (Direction Control)

Functional Features

  • Bidirectional data transfer between two voltage domains
  • Automatic direction control based on the DIR pin
  • Output enable/disable control using the OE pin
  • High-speed operation for efficient data transmission
  • Protection against ESD to ensure device reliability

Advantages and Disadvantages

Advantages

  • Enables seamless communication between devices with different voltage levels
  • Wide operating voltage range allows compatibility with various logic families
  • Low power consumption for energy-efficient designs
  • Robust protection against ESD ensures device reliability

Disadvantages

  • Limited maximum data rate compared to some other bus transceiver ICs
  • Requires careful consideration of voltage level compatibility to avoid signal integrity issues

Working Principles

The 74LVT245WM operates by receiving data from one voltage domain, translating it to the appropriate voltage level, and transmitting it to the other voltage domain bidirectionally. The direction of data flow is controlled by the DIR pin, while the OE pin enables or disables the output.

Detailed Application Field Plans

The 74LVT245WM finds applications in various digital systems where voltage translation is required. Some common application fields include: - Microcontroller interfacing - Communication systems - Data acquisition systems - Industrial automation - Consumer electronics

Detailed and Complete Alternative Models

  • 74LVC245A: Similar functionality with lower power consumption
  • SN74LVTH245A: Higher data rate capability with similar voltage translation features
  • 74HCT245: Compatible with TTL logic levels, suitable for legacy systems

In conclusion, the 74LVT245WM is a versatile bus transceiver IC that enables efficient voltage translation between different logic levels. Its wide operating voltage range, high-speed operation, and robust protection features make it suitable for various digital systems. However, designers should consider its limitations in terms of maximum data rate and voltage compatibility to ensure optimal performance.

Enumere 10 preguntas y respuestas comunes relacionadas con la aplicación de 74LVT245WM en soluciones técnicas

Sure! Here are 10 common questions and answers related to the application of 74LVT245WM in technical solutions:

  1. Q: What is the 74LVT245WM? A: The 74LVT245WM is a bidirectional octal bus transceiver with 3-state outputs, commonly used for level shifting and signal buffering in digital systems.

  2. Q: What is the operating voltage range of the 74LVT245WM? A: The 74LVT245WM operates within a voltage range of 2.7V to 3.6V.

  3. Q: How many data lines can the 74LVT245WM handle? A: The 74LVT245WM can handle 8 bidirectional data lines.

  4. Q: Can the 74LVT245WM be used for voltage level translation between different logic families? A: Yes, the 74LVT245WM is suitable for voltage level translation between different logic families, such as TTL and CMOS.

  5. Q: Does the 74LVT245WM have built-in protection against overvoltage or ESD events? A: Yes, the 74LVT245WM typically includes built-in protection against overvoltage and electrostatic discharge (ESD) events.

  6. Q: What is the maximum data transfer rate supported by the 74LVT245WM? A: The 74LVT245WM can support data transfer rates up to 400 Mbps.

  7. Q: Can the 74LVT245WM be used in both parallel and serial communication systems? A: Yes, the 74LVT245WM can be used in both parallel and serial communication systems, depending on the specific application requirements.

  8. Q: Is the 74LVT245WM compatible with standard logic families like TTL and CMOS? A: Yes, the 74LVT245WM is compatible with standard logic families like TTL and CMOS.

  9. Q: Can the 74LVT245WM be used for level shifting between different supply voltages? A: Yes, the 74LVT245WM can be used for level shifting between different supply voltages, as long as they fall within its specified operating voltage range.

  10. Q: What are some typical applications of the 74LVT245WM? A: The 74LVT245WM is commonly used in applications such as data communication systems, memory interfaces, bus drivers, and general-purpose level shifting circuits.

Please note that the specific details and features of the 74LVT245WM may vary, so it's always recommended to refer to the datasheet or manufacturer's documentation for accurate information.