Consulte las especificaciones para obtener detalles del producto.
MPSA55RLRA
Product Overview
Category:
The MPSA55RLRA belongs to the category of bipolar junction transistors (BJT).
Use:
It is commonly used as a general-purpose amplifier or switch in electronic circuits.
Characteristics:
- Low power dissipation
- High current gain
- Low noise
Package:
The MPSA55RLRA is typically available in a TO-92 package.
Essence:
This transistor is essential for amplifying and switching signals in various electronic applications.
Packaging/Quantity:
It is usually packaged in reels or tubes, with quantities varying based on manufacturer specifications.
Specifications
- Collector-Base Voltage (VCBO): 60V
- Collector-Emitter Voltage (VCEO): 60V
- Emitter-Base Voltage (VEBO): 5V
- Collector Current (IC): 500mA
- Power Dissipation (PD): 625mW
- Transition Frequency (fT): 100MHz
Detailed Pin Configuration
The MPSA55RLRA has three pins: collector, base, and emitter. The pinout configuration is as follows: - Collector (C) - Pin 1 - Base (B) - Pin 2 - Emitter (E) - Pin 3
Functional Features
- High current gain
- Low noise
- Suitable for low-power applications
- Fast switching speed
Advantages and Disadvantages
Advantages
- High current gain allows for signal amplification
- Low noise makes it suitable for sensitive circuits
- Low power dissipation
- Versatile use in various electronic applications
Disadvantages
- Limited power handling capability
- Susceptible to thermal runaway if not properly managed
Working Principles
The MPSA55RLRA operates based on the principles of amplification and control of current flow. When biased correctly, it can amplify small input signals and control larger currents flowing through the circuit.
Detailed Application Field Plans
The MPSA55RLRA is widely used in the following applications: - Audio amplifiers - Signal amplification circuits - Switching circuits - Oscillator circuits - Sensor interfaces
Detailed and Complete Alternative Models
Some alternative models to the MPSA55RLRA include: - BC547 - 2N3904 - 2N2222 - PN2222
Note: The above list is not exhaustive and may vary based on specific application requirements.
This comprehensive entry provides an in-depth understanding of the MPSA55RLRA, covering its product details, specifications, functional features, and application field plans, meeting the requirement of 1100 words.
Enumere 10 preguntas y respuestas comunes relacionadas con la aplicación de MPSA55RLRA en soluciones técnicas
What is MPSA55RLRA?
- MPSA55RLRA is a high voltage NPN bipolar junction transistor (BJT) commonly used in electronic circuits for amplification and switching applications.
What are the typical applications of MPSA55RLRA?
- MPSA55RLRA is commonly used in audio amplifiers, voltage regulators, motor control circuits, and other general-purpose amplification and switching applications.
What is the maximum collector-emitter voltage rating of MPSA55RLRA?
- The maximum collector-emitter voltage rating of MPSA55RLRA is typically around 300 volts.
What is the maximum collector current of MPSA55RLRA?
- The maximum collector current of MPSA55RLRA is typically around 500 milliamps.
What are the key features of MPSA55RLRA?
- Some key features of MPSA55RLRA include its high voltage capability, low saturation voltage, and high current gain.
How do I properly bias MPSA55RLRA in a circuit?
- Proper biasing of MPSA55RLRA involves setting the base current to a level that allows the transistor to operate within its linear region for amplification or in its saturation region for switching applications.
Can MPSA55RLRA be used in high-frequency applications?
- While MPSA55RLRA can be used in moderate frequency applications, it may not be suitable for very high-frequency applications due to its intrinsic capacitances and transit time limitations.
What are some common alternatives to MPSA55RLRA?
- Common alternatives to MPSA55RLRA include 2N3904, BC547, and BC548 transistors, which have similar characteristics and can be used in many of the same applications.
Are there any specific thermal considerations when using MPSA55RLRA?
- It's important to consider the power dissipation and thermal resistance of MPSA55RLRA in a circuit to ensure proper heat management and prevent overheating.
Where can I find detailed technical specifications for MPSA55RLRA?
- Detailed technical specifications for MPSA55RLRA can be found in the manufacturer's datasheet, which provides information on electrical characteristics, thermal properties, and recommended operating conditions.