ON Semiconductor
La imagen puede ser una representación.
Consulte las especificaciones para obtener detalles del producto.
NCP1079BAP065G
Ver Detalle Hojas de datos

NCP1079BAP065G

Product Overview

Category

The NCP1079BAP065G belongs to the category of integrated circuits (ICs) specifically designed for power management applications.

Use

This IC is commonly used in various electronic devices and systems to regulate and control power supply, ensuring efficient and reliable operation.

Characteristics

  • The NCP1079BAP065G is known for its high efficiency and low standby power consumption.
  • It offers excellent voltage regulation and protection features.
  • This IC is designed to operate within a wide input voltage range, making it suitable for diverse applications.
  • It incorporates advanced control algorithms to optimize power conversion efficiency.

Package

The NCP1079BAP065G is available in a compact and industry-standard package, allowing easy integration into different circuit designs.

Essence

The essence of the NCP1079BAP065G lies in its ability to efficiently manage power supply, providing stable and regulated voltages to various components and subsystems.

Packaging/Quantity

This IC is typically packaged in reels or tubes, with each reel or tube containing a specific quantity of units. The exact packaging and quantity may vary depending on the manufacturer's specifications.

Specifications

  • Input Voltage Range: 4.5V to 25V
  • Output Voltage Range: 0.8V to 12V
  • Maximum Output Current: 3A
  • Switching Frequency: 65kHz
  • Operating Temperature Range: -40°C to 125°C
  • Package Type: TO-220

Detailed Pin Configuration

The NCP1079BAP065G has the following pin configuration:

  1. VCC: Power supply input
  2. GND: Ground reference
  3. FB: Feedback pin for output voltage regulation
  4. COMP: Compensation pin for stability optimization
  5. CS: Current sense pin for current limit control
  6. SS: Soft-start pin for controlled startup
  7. EN: Enable pin for on/off control
  8. VOUT: Output voltage pin

Functional Features

  • Voltage regulation: The NCP1079BAP065G ensures stable and accurate output voltages, even under varying load conditions.
  • Overcurrent protection: It incorporates a current sense mechanism to prevent excessive current flow, protecting the IC and connected components.
  • Soft-start function: The soft-start pin allows controlled startup, reducing inrush current and minimizing stress on the system.
  • Enable/disable control: The enable pin enables easy on/off control of the IC, providing flexibility in power management.

Advantages and Disadvantages

Advantages

  • High efficiency and low standby power consumption contribute to energy savings.
  • Wide input voltage range makes it suitable for various applications.
  • Compact package facilitates integration into different circuit designs.
  • Advanced control algorithms optimize power conversion efficiency.

Disadvantages

  • Limited maximum output current may restrict its use in high-power applications.
  • Higher switching frequency may require additional filtering components for noise reduction.

Working Principles

The NCP1079BAP065G operates based on a pulse width modulation (PWM) control scheme. It regulates the output voltage by adjusting the duty cycle of the internal power switch. This control mechanism ensures efficient power transfer from the input to the output while maintaining voltage stability.

Detailed Application Field Plans

The NCP1079BAP065G finds application in various fields, including but not limited to: 1. Consumer electronics: Power supply regulation in televisions, audio systems, and gaming consoles. 2. Industrial automation: Control and regulation of power supply in industrial machinery and equipment. 3. Automotive electronics: Voltage regulation in automotive systems, such as infotainment systems and lighting controls. 4. Renewable energy systems: Efficient power management in solar panels and wind turbines. 5. Telecommunications: Power supply control in networking equipment and communication devices.

Detailed and Complete Alternative Models

  1. NCP1079BAP065G-ADJ: Similar to the NCP1079BAP065G, but with adjustable output voltage.
  2. NCP1079BAP033G: Variant with a lower switching frequency of 33kHz.
  3. NCP1079BAP100G: Variant with a higher maximum output current of 10A.

These alternative models offer similar functionality and characteristics, providing flexibility for different application requirements.

Word count: 570 words

Enumere 10 preguntas y respuestas comunes relacionadas con la aplicación de NCP1079BAP065G en soluciones técnicas

Sure! Here are 10 common questions and answers related to the application of NCP1079BAP065G in technical solutions:

  1. Q: What is NCP1079BAP065G? A: NCP1079BAP065G is a power management IC (PMIC) designed for offline flyback converters used in various technical solutions.

  2. Q: What are the key features of NCP1079BAP065G? A: The key features of NCP1079BAP065G include high voltage startup, integrated MOSFET, frequency jittering for EMI reduction, and comprehensive protection features.

  3. Q: What is the input voltage range supported by NCP1079BAP065G? A: NCP1079BAP065G supports an input voltage range from 85V AC to 265V AC.

  4. Q: What is the output power range that can be achieved with NCP1079BAP065G? A: NCP1079BAP065G can achieve an output power range up to 65W.

  5. Q: Can NCP1079BAP065G operate in continuous conduction mode (CCM)? A: Yes, NCP1079BAP065G can operate in both discontinuous conduction mode (DCM) and continuous conduction mode (CCM).

  6. Q: Does NCP1079BAP065G have built-in protection features? A: Yes, NCP1079BAP065G has built-in protection features such as overvoltage protection (OVP), overcurrent protection (OCP), and thermal shutdown.

  7. Q: Is NCP1079BAP065G suitable for low-power applications? A: Yes, NCP1079BAP065G is suitable for a wide range of applications, including low-power applications.

  8. Q: Can NCP1079BAP065G be used in dimmable LED lighting solutions? A: Yes, NCP1079BAP065G can be used in dimmable LED lighting solutions with appropriate external circuitry.

  9. Q: What is the typical efficiency of NCP1079BAP065G? A: The typical efficiency of NCP1079BAP065G is around 85-90%, depending on the operating conditions.

  10. Q: Are there any evaluation boards or reference designs available for NCP1079BAP065G? A: Yes, ON Semiconductor provides evaluation boards and reference designs to help users quickly prototype and implement NCP1079BAP065G in their technical solutions.

Please note that these answers are general and may vary based on specific application requirements. It's always recommended to refer to the datasheet and consult with the manufacturer for detailed information.