SI5351A-B06860-GM

Overview

Category

SI5351A-B06860-GM belongs to the category of electronic components.

Use

It is commonly used in electronic devices for frequency synthesis and clock generation.

Characteristics

• High precision and stability
• Wide frequency range
• Low phase noise
• Programmable output frequencies
• Small package size

Package

SI5351A-B06860-GM is available in a compact surface-mount package.

Essence

The essence of SI5351A-B06860-GM lies in its ability to generate accurate and stable clock signals for various applications.

Packaging/Quantity

This product is typically packaged in reels or trays, with a quantity of 1000 units per reel/tray.

Specifications and Parameters

• Frequency Range: 8 kHz to 160 MHz
• Output Channels: 3
• Supply Voltage: 2.5V to 3.63V
• Operating Temperature Range: -40°C to +85°C
• Phase Noise: -150 dBc/Hz (typical)

Pin Configuration

The pin configuration of SI5351A-B06860-GM is as follows:

| Pin Number | Pin Name | Description | |------------|----------|-------------| | 1 | VDD | Power supply voltage input | | 2 | GND | Ground | | 3 | SDA | I2C data input/output | | 4 | SCL | I2C clock input | | 5 | CLK0 | Output channel 0 | | 6 | CLK1 | Output channel 1 | | 7 | CLK2 | Output channel 2 | | 8 | NC | No connection |

Functional Characteristics

SI5351A-B06860-GM offers the following functional characteristics:

• Programmable frequency synthesis
• Fractional-N and Integer-N modes
• Spread spectrum modulation
• Clock output enable/disable control
• Crystal oscillator input

Advantages and Disadvantages

Advantages

• High precision and stability
• Wide frequency range
• Low phase noise
• Compact package size
• Flexible programmability

Disadvantages

• Requires I2C interface for configuration
• Limited number of output channels

Applicable Range of Products

SI5351A-B06860-GM is suitable for a wide range of applications, including: - Communication systems - Test and measurement equipment - Industrial automation - Consumer electronics - Medical devices

Working Principles

SI5351A-B06860-GM utilizes a phase-locked loop (PLL) to generate accurate clock signals. It takes an external crystal oscillator as a reference and uses frequency division and multiplication techniques to synthesize the desired output frequencies.

Detailed Application Field Plans

SI5351A-B06860-GM can be used in various applications, such as: 1. Wireless communication systems: Provides stable clock signals for transceivers and base stations. 2. Test and measurement equipment: Generates precise timing signals for oscilloscopes and signal generators. 3. Industrial automation: Synchronizes control systems and sensors. 4. Consumer electronics: Enables accurate timing in TVs, audio systems, and gaming consoles. 5. Medical devices: Ensures precise timing in medical imaging equipment and patient monitoring devices.

Detailed Alternative Models

Some alternative models to SI5351A-B06860-GM include: - SI5351B-B06860-GM - SI5351C-B06860-GM - SI5351D-B06860-GM

5 Common Technical Questions and Answers

1. Q: What is the maximum output frequency of SI5351A-B06860-GM? A: The maximum output frequency is 160 MHz.

2. Q: Can I program the output frequencies using an external microcontroller? A: Yes, SI5351A-B06860-GM supports I2C interface for programming.

3. Q: Does SI5351A-B06860-GM support spread spectrum modulation? A: Yes, it has built-in support for spread spectrum modulation.

4. Q: What is the typical phase noise performance of SI5351A-B06860-GM? A: The typical phase noise is -150 dBc/Hz.

5. Q: Can SI5351A-B06860-GM operate with a supply voltage below 2.5V? A: No, the minimum supply voltage required is 2.5V.

This encyclopedia entry provides a comprehensive overview of SI5351A-B06860-GM, including its basic information, specifications, pin configuration, functional characteristics, advantages and disadvantages, applicable range of products, working principles, detailed application field plans, alternative models, and common technical questions and answers