La imagen puede ser una representación.
Consulte las especificaciones para obtener detalles del producto.
SI5355A-B06207-GMR
Basic Information Overview
- Category: Integrated Circuit (IC)
- Use: Clock Generator and Multiplier
- Characteristics: Low jitter, high frequency accuracy, programmable output frequencies
- Package: 20-QFN (Quad Flat No-Lead)
- Essence: Clock generation and multiplication for various applications
- Packaging/Quantity: Tape and Reel, 3000 units per reel
Specifications and Parameters
- Frequency Range: 8 kHz to 160 MHz
- Output Channels: 3
- Supply Voltage: 2.5V to 3.63V
- Operating Temperature Range: -40°C to +85°C
- Phase Jitter: <1 ps RMS (typical)
Detailed and Complete Pin Configuration
- VDDO: Output Power Supply
- GND: Ground
- XTAL1: Crystal Input
- XTAL2: Crystal Output
- SDA: I2C Serial Data Input
- SCL: I2C Serial Clock Input
- OE: Output Enable
- CLK0: Output Clock Channel 0
- CLK1: Output Clock Channel 1
- CLK2: Output Clock Channel 2
- VDD: Core Power Supply
- GND: Ground
- NC: No Connection
- NC: No Connection
- NC: No Connection
- NC: No Connection
- NC: No Connection
- NC: No Connection
- NC: No Connection
- NC: No Connection
Functional Characteristics
- Flexible clock synthesis and multiplication
- Programmable output frequencies and formats
- Low phase noise and jitter performance
- I2C interface for easy configuration
- Output enable/disable control
Advantages and Disadvantages
Advantages:
- Wide frequency range
- High accuracy and stability
- Easy to integrate into various systems
- Low power consumption
Disadvantages:
- Limited number of output channels
- Requires external crystal for clock input
Applicable Range of Products
- Communication systems
- Data storage devices
- Industrial automation
- Test and measurement equipment
- Consumer electronics
Working Principles
The SI5355A-B06207-GMR is a clock generator and multiplier IC that utilizes a phase-locked loop (PLL) to generate and multiply clock signals. It takes an external crystal oscillator as the reference input and generates multiple output clocks with programmable frequencies and formats.
Detailed Application Field Plans
- Communication Systems: Use the SI5355A-B06207-GMR to generate clock signals for data transmission, synchronization, and timing in wireless communication systems.
- Data Storage Devices: Utilize the IC to provide accurate clock signals for data read/write operations in hard disk drives, solid-state drives, and other storage devices.
- Industrial Automation: Employ the IC to generate precise timing signals for control systems, motor drives, and PLCs (Programmable Logic Controllers).
- Test and Measurement Equipment: Use the IC to generate stable clock signals for oscilloscopes, signal generators, and other test and measurement instruments.
- Consumer Electronics: Incorporate the IC into audio/video equipment, gaming consoles, and smart devices to ensure accurate timing for various functions.
Detailed Alternative Models
- SI5351A-B-GM: Similar clock generator and multiplier IC with fewer output channels.
- Si5341A-B-GM: Clock generator and jitter attenuator IC with advanced features for high-performance applications.
- Si5338A-B-GM: Programmable clock generator IC with integrated voltage-controlled crystal oscillator (VCXO).
5 Common Technical Questions and Answers
Q: What is the maximum frequency that can be generated by the SI5355A-B06207-GMR?
A: The maximum output frequency is 160 MHz.
Q: Can I program the output frequencies on-the-fly?
A: Yes, the IC supports dynamic frequency programming through the I2C interface.
Q: Does the SI5355A-B06207-GMR require an external crystal oscillator?
A: Yes, it requires an external crystal oscillator for clock input.
Q: How many output channels does the IC have?
A: The IC has three output channels (CLK0, CLK1, and CLK2).
Q: What is the typical phase jitter of the SI5355A-B06207-GMR?
A: The typical phase jitter is less than 1 ps RMS.
This encyclopedia entry provides a comprehensive overview of the SI5355A-B06207-GMR clock generator and multiplier IC. It includes basic information, specifications, pin configuration, functional characteristics, advantages and disadvantages, applicable range of products, working principles, detailed application field plans, alternative models, and common technical