Consulte las especificaciones para obtener detalles del producto.
SI7013-A10-IM1
Product Overview
Category
The SI7013-A10-IM1 belongs to the category of environmental sensors.
Use
It is used for measuring temperature and humidity in various applications.
Characteristics
- High accuracy
- Low power consumption
- Small form factor
Package
The SI7013-A10-IM1 comes in a compact package suitable for surface mount assembly.
Essence
This sensor provides precise and reliable measurements of temperature and humidity.
Packaging/Quantity
The sensor is typically supplied in tape and reel packaging with quantities varying based on customer requirements.
Specifications
- Temperature Range: -40°C to 125°C
- Humidity Range: 0% to 100%
- Accuracy: ±0.4°C for temperature, ±3% for relative humidity
- Supply Voltage: 1.9V to 3.6V
- Interface: I2C
Detailed Pin Configuration
The SI7013-A10-IM1 has a total of 6 pins: 1. VDD - Power supply 2. GND - Ground 3. SDA - I2C data line 4. SCL - I2C clock line 5. ADDR - Address selection 6. ALERT - Interrupt output
Functional Features
- High precision temperature and humidity sensing
- Low power consumption for battery-operated devices
- I2C interface for easy integration with microcontrollers
Advantages
- Accurate and reliable measurements
- Wide operating temperature and humidity range
- Low power consumption extends battery life
Disadvantages
- Limited to I2C interface, may not be suitable for all applications
- Sensitive to external contaminants in certain environments
Working Principles
The SI7013-A10-IM1 utilizes a capacitive sensing element to measure both temperature and humidity. The sensor's analog front-end converts the capacitance into digital readings, which are then communicated over the I2C interface.
Detailed Application Field Plans
The SI7013-A10-IM1 is well-suited for use in various applications including: - HVAC systems - Weather stations - Industrial automation - Consumer electronics
Detailed and Complete Alternative Models
Some alternative models to the SI7013-A10-IM1 include: - SHT3x series from Sensirion - HDC2080 from Texas Instruments - HTU21D from Measurement Specialties
In conclusion, the SI7013-A10-IM1 offers high-precision environmental sensing capabilities with low power consumption, making it an ideal choice for a wide range of applications.
Word count: 366
Enumere 10 preguntas y respuestas comunes relacionadas con la aplicación de SI7013-A10-IM1 en soluciones técnicas
What is the operating voltage range of SI7013-A10-IM1?
- The operating voltage range of SI7013-A10-IM1 is 1.9V to 3.6V.
What is the accuracy of SI7013-A10-IM1 in measuring relative humidity?
- SI7013-A10-IM1 has a typical accuracy of ±3% RH.
Can SI7013-A10-IM1 measure temperature as well?
- Yes, SI7013-A10-IM1 can measure temperature with an accuracy of ±0.4°C.
Is SI7013-A10-IM1 suitable for battery-powered applications?
- Yes, SI7013-A10-IM1's low operating voltage and power consumption make it suitable for battery-powered applications.
What is the communication interface used by SI7013-A10-IM1?
- SI7013-A10-IM1 uses an I2C digital interface for communication.
Does SI7013-A10-IM1 require calibration?
- SI7013-A10-IM1 comes factory-calibrated, but it also supports user calibration if needed.
Can SI7013-A10-IM1 be used in outdoor environments?
- SI7013-A10-IM1 is designed for indoor use, but it can be used in protected outdoor environments.
What is the response time of SI7013-A10-IM1 in measuring humidity and temperature?
- SI7013-A10-IM1 has a fast response time, typically within 8 seconds for humidity and 5 seconds for temperature.
Does SI7013-A10-IM1 have built-in temperature compensation for humidity measurements?
- Yes, SI7013-A10-IM1 incorporates a built-in temperature sensor for accurate temperature compensation in humidity measurements.
Is SI7013-A10-IM1 compatible with common microcontrollers and development platforms?
- Yes, SI7013-A10-IM1 is compatible with most common microcontrollers and development platforms that support the I2C interface.