Texas Instruments
La imagen puede ser una representación.
Consulte las especificaciones para obtener detalles del producto.
74LVC1G175DBVRG4
Ver Detalle Hojas de datos

74LVC1G175DBVRG4

Basic Information Overview

  • Category: Integrated Circuit (IC)
  • Use: Flip-Flop
  • Characteristics: Low-voltage, high-speed, single D-type flip-flop
  • Package: SOT-23-5
  • Essence: This IC is a single D-type flip-flop with a clear input. It operates at low voltage and high speed, making it suitable for various digital applications.
  • Packaging/Quantity: Available in tape and reel packaging, with 3000 units per reel.

Specifications

  • Supply Voltage Range: 1.65V to 5.5V
  • High-Level Input Voltage: 0.7 x VCC
  • Low-Level Input Voltage: 0.3 x VCC
  • High-Level Output Voltage: 0.9 x VCC
  • Low-Level Output Voltage: 0.1 x VCC
  • Maximum Operating Frequency: 400 MHz
  • Propagation Delay: 2.8 ns (typical)

Detailed Pin Configuration

The 74LVC1G175DBVRG4 has the following pin configuration:

____ CLR| |VCC D | |Q GND | |Q' |____|

  • CLR: Clear input (active LOW)
  • D: Data input
  • VCC: Positive power supply
  • Q: Complementary output
  • Q': Non-complementary output
  • GND: Ground

Functional Features

  • Single D-type flip-flop with clear input
  • High-speed operation, suitable for time-critical applications
  • Low-voltage operation, compatible with various digital systems
  • Clear input allows for synchronous reset of the flip-flop
  • Complementary and non-complementary outputs provide flexibility in signal routing

Advantages and Disadvantages

Advantages: - Low-voltage operation enables compatibility with a wide range of digital systems - High-speed operation allows for time-critical applications - Clear input provides synchronous reset capability

Disadvantages: - Limited functionality as a single flip-flop, not suitable for complex sequential logic designs - Small package size may require careful handling during assembly

Working Principles

The 74LVC1G175DBVRG4 is a positive-edge triggered D-type flip-flop. It stores a single bit of data and can be cleared using the clear input (CLR). The flip-flop operates at low voltage and high speed, making it suitable for various digital applications.

Detailed Application Field Plans

The 74LVC1G175DBVRG4 can be used in a wide range of applications, including but not limited to: - Digital communication systems - Consumer electronics - Industrial automation - Automotive electronics - Medical devices

Detailed and Complete Alternative Models

Some alternative models that offer similar functionality to the 74LVC1G175DBVRG4 include: - SN74LVC1G175DBVR - MC74VHC1G175DFT1G - TC7SET175FK

These alternatives provide similar features and can be used as replacements depending on specific requirements.

Word count: 314 words

Enumere 10 preguntas y respuestas comunes relacionadas con la aplicación de 74LVC1G175DBVRG4 en soluciones técnicas

Sure! Here are 10 common questions and answers related to the application of 74LVC1G175DBVRG4 in technical solutions:

Q1: What is the 74LVC1G175DBVRG4? A1: The 74LVC1G175DBVRG4 is a single D-type flip-flop with clear, manufactured by Texas Instruments. It is designed for low-voltage applications and operates at a voltage range of 1.65V to 5.5V.

Q2: What is the purpose of a D-type flip-flop? A2: A D-type flip-flop is a sequential logic device that stores and transfers data. It has a data input (D), clock input (CLK), and output (Q). The stored value at the D input is transferred to the Q output on each rising edge of the CLK signal.

Q3: What are the key features of the 74LVC1G175DBVRG4? A3: Some key features of the 74LVC1G175DBVRG4 include low power consumption, wide operating voltage range, high-speed operation, and compatibility with both CMOS and TTL levels.

Q4: What is the maximum operating frequency of the 74LVC1G175DBVRG4? A4: The 74LVC1G175DBVRG4 can operate at a maximum frequency of 400 MHz.

Q5: How many flip-flops are there in the 74LVC1G175DBVRG4? A5: The 74LVC1G175DBVRG4 contains a single D-type flip-flop.

Q6: Can the 74LVC1G175DBVRG4 be used in battery-powered applications? A6: Yes, the 74LVC1G175DBVRG4 is suitable for battery-powered applications due to its low power consumption and wide operating voltage range.

Q7: What is the output drive capability of the 74LVC1G175DBVRG4? A7: The 74LVC1G175DBVRG4 has a typical output drive capability of ±24 mA.

Q8: Is the 74LVC1G175DBVRG4 compatible with both CMOS and TTL logic levels? A8: Yes, the 74LVC1G175DBVRG4 is compatible with both CMOS and TTL logic levels, making it versatile for various applications.

Q9: Can the 74LVC1G175DBVRG4 be used in high-speed data transfer applications? A9: Yes, the 74LVC1G175DBVRG4 is designed for high-speed operation, making it suitable for high-speed data transfer applications.

Q10: Does the 74LVC1G175DBVRG4 have a clear input? A10: Yes, the 74LVC1G175DBVRG4 has a clear (CLR) input that allows the user to reset the flip-flop to a known state.

Please note that these answers are general and may vary depending on specific application requirements.