Texas Instruments
La imagen puede ser una representación.
Consulte las especificaciones para obtener detalles del producto.
ADS1292IPBS
Ver Detalle Hojas de datos

ADS1292IPBS

Product Overview

Category

ADS1292IPBS belongs to the category of integrated circuits (ICs).

Use

This product is primarily used for bio-potential measurement applications, such as electrocardiograms (ECG) and electromyograms (EMG).

Characteristics

  • High-resolution analog-to-digital converter (ADC)
  • Low-power consumption
  • Integrated lead-off detection
  • Built-in right-leg drive amplifier
  • Flexible input multiplexer
  • On-chip oscillator

Package

ADS1292IPBS is available in a small outline package (SOIC) with 20 pins.

Essence

The essence of ADS1292IPBS lies in its ability to accurately measure and convert bio-potential signals into digital data for further analysis and processing.

Packaging/Quantity

This product is typically sold in reels or tubes containing a specific quantity of ICs, usually around 250 units per reel.

Specifications

  • Resolution: 24 bits
  • Sampling Rate: Up to 32 kSPS (samples per second)
  • Input Voltage Range: ±4.5 V
  • Power Supply Voltage Range: 2.7 V to 5.5 V
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

  1. AVDD: Analog power supply
  2. DVDD: Digital power supply
  3. CLK: Clock input
  4. DRDY: Data ready output
  5. START: Start conversion input
  6. PWDN: Power-down mode control input
  7. RESET: Reset control input
  8. GPIO1: General-purpose input/output pin 1
  9. GPIO2: General-purpose input/output pin 2
  10. GPIO3: General-purpose input/output pin 3
  11. GPIO4: General-purpose input/output pin 4
  12. GPIO5: General-purpose input/output pin 5
  13. GPIO6: General-purpose input/output pin 6
  14. GPIO7: General-purpose input/output pin 7
  15. GPIO8: General-purpose input/output pin 8
  16. CLKSEL: Clock source selection input
  17. MISO: SPI master-in, slave-out data
  18. MOSI: SPI master-out, slave-in data
  19. CS: SPI chip select input
  20. SCLK: SPI serial clock input

Functional Features

  1. High-resolution ADC for accurate bio-potential measurements.
  2. Integrated lead-off detection to ensure signal integrity.
  3. Built-in right-leg drive amplifier for common-mode noise rejection.
  4. Flexible input multiplexer for versatile signal routing.
  5. On-chip oscillator for simplified system design.

Advantages and Disadvantages

Advantages

  • High resolution for precise measurement.
  • Low power consumption for extended battery life.
  • Integrated lead-off detection enhances signal quality.
  • Versatile input multiplexer allows for various signal configurations.
  • On-chip oscillator simplifies system design.

Disadvantages

  • Limited input voltage range of ±4.5 V.
  • Requires an external clock source for operation.

Working Principles

ADS1292IPBS works by amplifying and digitizing bio-potential signals using its integrated analog-to-digital converter. The amplified signals are then converted into digital data with high resolution. The device also includes lead-off detection circuitry to identify any disconnection or poor contact with the electrodes. The right-leg drive amplifier helps reject common-mode noise, ensuring accurate measurements.

Detailed Application Field Plans

ADS1292IPBS finds applications in various fields, including: 1. Medical devices: ECG monitors, EMG devices, and portable health trackers. 2. Research laboratories: Bio-signal analysis and physiological research. 3. Sports and fitness: Wearable devices for monitoring heart rate and muscle activity. 4. Telemedicine: Remote patient monitoring systems.

Detailed and Complete Alternative Models

  1. ADS1292R: Similar to ADS1292IPBS, but with additional features like respiration measurement capability.
  2. ADS1299: A higher-channel count version of the ADS1292IPBS, suitable for multi-lead ECG applications.
  3. ADS1198: Offers similar functionality but with lower power consumption and reduced package size.

These alternative models provide options based on specific requirements and system constraints.

Word Count: 550 words

Enumere 10 preguntas y respuestas comunes relacionadas con la aplicación de ADS1292IPBS en soluciones técnicas

  1. Question: What is the ADS1292IPBS?
    Answer: The ADS1292IPBS is a highly integrated, low-power, 24-bit analog-to-digital converter (ADC) specifically designed for medical and fitness applications.

  2. Question: What are the key features of the ADS1292IPBS?
    Answer: The key features of the ADS1292IPBS include high-resolution data conversion, low power consumption, built-in lead-off detection, and flexible input multiplexing.

  3. Question: How does the ADS1292IPBS handle lead-off detection?
    Answer: The ADS1292IPBS has built-in lead-off detection circuitry that monitors the impedance between the patient and the electrodes, allowing for early detection of electrode disconnection or poor contact.

  4. Question: Can the ADS1292IPBS be used in wearable devices?
    Answer: Yes, the low power consumption and small form factor make the ADS1292IPBS suitable for integration into wearable devices such as fitness trackers or portable ECG monitors.

  5. Question: What is the maximum sampling rate of the ADS1292IPBS?
    Answer: The ADS1292IPBS supports a maximum sampling rate of 32,000 samples per second (SPS), allowing for accurate capture of physiological signals.

  6. Question: Does the ADS1292IPBS support multiple channels?
    Answer: Yes, the ADS1292IPBS supports up to two differential channels, enabling simultaneous measurement of multiple physiological signals.

  7. Question: Is the ADS1292IPBS compatible with microcontrollers?
    Answer: Yes, the ADS1292IPBS can communicate with microcontrollers using standard serial communication protocols such as SPI or I2C.

  8. Question: Can the ADS1292IPBS be used in battery-powered applications?
    Answer: Yes, the ADS1292IPBS is designed for low power consumption, making it suitable for battery-powered applications where power efficiency is crucial.

  9. Question: What is the resolution of the ADS1292IPBS?
    Answer: The ADS1292IPBS has a 24-bit resolution, providing high-precision measurement of physiological signals.

  10. Question: Are evaluation boards available for the ADS1292IPBS?
    Answer: Yes, Texas Instruments provides evaluation boards and software tools to facilitate the development and testing of applications using the ADS1292IPBS.