Texas Instruments
La imagen puede ser una representación.
Consulte las especificaciones para obtener detalles del producto.
BQ294703DSGT
Ver Detalle Hojas de datos

BQ294703DSGT

Product Overview

Category

BQ294703DSGT belongs to the category of integrated circuits (ICs).

Use

This IC is commonly used for battery protection in various electronic devices.

Characteristics

  • Package: The BQ294703DSGT comes in a small outline package (SOT-23-6).
  • Essence: It provides overvoltage, undervoltage, and overcurrent protection for batteries.
  • Packaging/Quantity: The IC is typically sold in reels containing 3000 units.

Specifications

The BQ294703DSGT has the following specifications:

  • Overvoltage Protection Threshold: 4.3V
  • Undervoltage Protection Threshold: 2.5V
  • Overcurrent Protection Threshold: 1.5A
  • Operating Voltage Range: 2.5V - 4.8V
  • Quiescent Current: 10µA (typical)
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The BQ294703DSGT has six pins with the following functions:

  1. VDD: Power supply input pin.
  2. GND: Ground reference pin.
  3. SDA: Serial data input/output pin.
  4. SCL: Serial clock input pin.
  5. OUT: Open-drain output pin for fault indication.
  6. RST: Reset input pin.

Functional Features

The key functional features of the BQ294703DSGT include:

  • Overvoltage Protection: Automatically disconnects the battery from the load when the voltage exceeds the threshold.
  • Undervoltage Protection: Cuts off the battery supply when the voltage drops below the specified threshold.
  • Overcurrent Protection: Safeguards against excessive current flow by interrupting the circuit.
  • Fault Indication: Provides an open-drain output for signaling fault conditions.
  • Reset Function: Allows for resetting the IC after a fault condition.

Advantages and Disadvantages

Advantages: - Compact package size enables integration into space-constrained designs. - Wide operating voltage range accommodates various battery types. - Low quiescent current minimizes power consumption.

Disadvantages: - Limited to protection against overvoltage, undervoltage, and overcurrent only. - Requires external components for complete battery management.

Working Principles

The BQ294703DSGT operates based on a combination of voltage and current monitoring. It continuously measures the battery voltage and compares it with the predefined thresholds. If any threshold is exceeded, the IC takes appropriate action to protect the battery and the connected circuitry.

Detailed Application Field Plans

The BQ294703DSGT finds applications in a wide range of electronic devices that utilize batteries, including but not limited to:

  1. Portable consumer electronics (e.g., smartphones, tablets)
  2. Wearable devices (e.g., smartwatches, fitness trackers)
  3. Medical devices (e.g., glucose meters, portable monitors)
  4. Industrial equipment (e.g., handheld tools, measurement instruments)

Detailed and Complete Alternative Models

Some alternative models that offer similar functionality to the BQ294703DSGT include:

  1. BQ29700: Provides enhanced battery protection features and supports higher voltage ranges.
  2. MAX14920: Offers integrated battery protection and monitoring capabilities.
  3. LTC6804: Suitable for multi-cell battery packs with advanced communication interfaces.

These alternative models can be considered based on specific application requirements and desired features.

Word count: 400 words

Enumere 10 preguntas y respuestas comunes relacionadas con la aplicación de BQ294703DSGT en soluciones técnicas

Sure! Here are 10 common questions and answers related to the application of BQ294703DSGT in technical solutions:

  1. Question: What is the BQ294703DSGT?
    Answer: The BQ294703DSGT is a battery protection and authentication IC designed for use in technical solutions.

  2. Question: What is the purpose of the BQ294703DSGT?
    Answer: The BQ294703DSGT is used to protect batteries from overcharging, over-discharging, and overcurrent conditions, ensuring their safe operation.

  3. Question: How does the BQ294703DSGT protect batteries?
    Answer: The BQ294703DSGT monitors battery voltage, current, and temperature, and takes appropriate actions like disconnecting the load or charging source to prevent damage to the battery.

  4. Question: Can the BQ294703DSGT be used with different types of batteries?
    Answer: Yes, the BQ294703DSGT is compatible with various battery chemistries, including lithium-ion, lithium-polymer, and lithium iron phosphate (LiFePO4).

  5. Question: What is the maximum voltage and current rating of the BQ294703DSGT?
    Answer: The BQ294703DSGT can handle a maximum voltage of 28V and a continuous current of up to 3A.

  6. Question: Does the BQ294703DSGT support cell balancing?
    Answer: No, the BQ294703DSGT does not have built-in cell balancing functionality. It focuses on battery protection and authentication.

  7. Question: Can the BQ294703DSGT communicate with a microcontroller or host system?
    Answer: Yes, the BQ294703DSGT features an I2C interface that allows communication with a microcontroller or host system for monitoring and control purposes.

  8. Question: Is the BQ294703DSGT suitable for automotive applications?
    Answer: Yes, the BQ294703DSGT is designed to meet the stringent requirements of automotive applications, including AEC-Q100 qualification.

  9. Question: What are the typical applications of the BQ294703DSGT?
    Answer: The BQ294703DSGT is commonly used in battery-powered devices, such as portable medical equipment, power tools, e-bikes, and other industrial applications.

  10. Question: Where can I find more information about the BQ294703DSGT?
    Answer: You can refer to the datasheet and technical documentation provided by the manufacturer or visit their official website for detailed information on the BQ294703DSGT.