Texas Instruments
La imagen puede ser una representación.
Consulte las especificaciones para obtener detalles del producto.
INA122UAG4
Ver Detalle Hojas de datos

INA122UAG4

Product Overview

Category: Integrated Circuit (IC)

Use: The INA122UAG4 is a precision instrumentation amplifier designed for accurate signal amplification in various applications.

Characteristics: - High accuracy and precision - Low noise and distortion - Wide input voltage range - High common-mode rejection ratio (CMRR) - Low power consumption

Package: The INA122UAG4 comes in a small outline integrated circuit (SOIC) package.

Essence: The essence of the INA122UAG4 lies in its ability to amplify weak signals accurately and with minimal noise interference.

Packaging/Quantity: The INA122UAG4 is typically sold in reels or tubes, containing a specified quantity of ICs per package.

Specifications

The key specifications of the INA122UAG4 include:

  • Supply Voltage Range: ±2.25V to ±18V
  • Input Offset Voltage: 50µV (maximum)
  • Input Bias Current: 0.5nA (maximum)
  • Gain Bandwidth Product: 1MHz (typical)
  • Input Common-Mode Voltage Range: -Vs + 1.8V to +Vs - 1.8V
  • Operating Temperature Range: -40°C to +125°C

Detailed Pin Configuration

The INA122UAG4 has eight pins, each serving a specific function:

  1. V+ (Positive Power Supply)
  2. V- (Negative Power Supply)
  3. REF (Reference Voltage)
  4. RG (Gain Setting Resistor)
  5. IN- (Inverting Input)
  6. IN+ (Non-Inverting Input)
  7. OUT (Output)
  8. NC (No Connection)

Functional Features

The key functional features of the INA122UAG4 are as follows:

  • High gain accuracy and stability
  • Excellent common-mode rejection
  • Low input offset voltage and bias current
  • Wide input voltage range
  • Low power consumption

Advantages and Disadvantages

Advantages: - High precision amplification - Low noise and distortion - Versatile application possibilities - Wide operating temperature range - Compact package size

Disadvantages: - Limited gain bandwidth product compared to some alternatives - Requires external gain-setting resistor

Working Principles

The INA122UAG4 operates based on the principle of differential amplification. It amplifies the difference between the non-inverting (IN+) and inverting (IN-) input voltages, while rejecting common-mode signals. This allows for accurate amplification of weak signals with minimal interference.

Detailed Application Field Plans

The INA122UAG4 finds applications in various fields, including but not limited to:

  1. Biomedical instrumentation
  2. Strain gauge amplification
  3. Temperature measurement systems
  4. Industrial process control
  5. Data acquisition systems
  6. Precision sensor interfaces

Detailed and Complete Alternative Models

Some alternative models that offer similar functionality to the INA122UAG4 are:

  1. AD620 - Instrumentation Amplifier by Analog Devices
  2. MCP6N11 - Zero-Drift Instrumentation Amplifier by Microchip Technology
  3. LT1167 - Precision Instrumentation Amplifier by Linear Technology

These alternative models provide comparable performance and can be considered as substitutes for the INA122UAG4 in specific applications.

Word count: 409

Enumere 10 preguntas y respuestas comunes relacionadas con la aplicación de INA122UAG4 en soluciones técnicas

Sure! Here are 10 common questions and answers related to the application of INA122UAG4 in technical solutions:

  1. Q: What is INA122UAG4? A: INA122UAG4 is a precision instrumentation amplifier designed for accurate amplification of low-level signals in various technical applications.

  2. Q: What is the input voltage range of INA122UAG4? A: The input voltage range of INA122UAG4 is typically ±10V, allowing it to handle a wide range of input signals.

  3. Q: Can INA122UAG4 be used in single-supply applications? A: Yes, INA122UAG4 can be used in both single-supply and dual-supply applications, making it versatile for different system requirements.

  4. Q: What is the gain accuracy of INA122UAG4? A: INA122UAG4 offers high gain accuracy with a typical gain error of only 0.01%, ensuring precise signal amplification.

  5. Q: Is INA122UAG4 suitable for low-power applications? A: Yes, INA122UAG4 has a low quiescent current of typically 200µA, making it suitable for low-power applications where power consumption is critical.

  6. Q: Can INA122UAG4 handle high common-mode voltages? A: Yes, INA122UAG4 has a high common-mode voltage range of typically ±13V, allowing it to handle large common-mode voltages without distortion.

  7. Q: Does INA122UAG4 have built-in EMI/RFI filters? A: No, INA122UAG4 does not have built-in EMI/RFI filters. Additional external filtering may be required depending on the application's requirements.

  8. Q: What is the temperature range of operation for INA122UAG4? A: INA122UAG4 can operate within a wide temperature range, typically from -40°C to +125°C, making it suitable for various environmental conditions.

  9. Q: Can INA122UAG4 be used in bridge sensor applications? A: Yes, INA122UAG4 is commonly used in bridge sensor applications due to its high common-mode rejection ratio and low offset voltage.

  10. Q: Are there any application notes or reference designs available for INA122UAG4? A: Yes, Texas Instruments provides application notes and reference designs for INA122UAG4, which can help users understand its implementation in different technical solutions.

Please note that the answers provided here are general and may vary depending on specific datasheet specifications and application requirements.